Tender For Provn Of Store Room, Tensile Fabric Near Veteran Cell And Echs, Addl/Altn Toilet Inside Building No F4 And Kitchen At Mes Ib, Vijay Durg Under Ge(Vd) Kolkata
Tender Value
42 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
17 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Store Room, Tensile Fabric Near Veteran Cell And Echs, Addl/Altn Toilet Inside Building No F4 And Kitchen At Mes Ib, Vijay Durg Under Ge(Vd) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | (B/R PORTION)Demolition of RCC of any description and in any position not otherwise specifically provided for .(upto 04 storey High of building) |
| 2 | M&L for RCC for Type B1 1:2:4 (20 mm graded aggregate) (Nominal mix) using 20 mm graded crushed stone aggregate as in chajjas/ shelves, similar work all as specified and directed (upto 04 storey high building) |
| 3 | M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed. |
| 4 | Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.(upto 04 storey High of building) |
| 5 | M&L for Rendering 10 mm thick in CM (1:6) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building) |
| 6 | M&L 5 mm thick cement plaster on ceiling surfaces without using extra cement finishing fair and even in CM 1:3 including necessary scaffolding complete all as directed. |
| 7 | M&L for preparation of new plastered surfaces of wall/ceiling and applying two coat of acrylic distemper over a coat of alkali registant primer with 2mm thick wall care putty. complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building). |
| 8 | M/L complete removal of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping including old putty surface etc and applying two coat of oil emulsion distemper over a coat of alkali registant primer and coat of wall / ceiling putty ( 2mm thick) to match with the new suface on wall and ceiling , complete all as specified and as directed by Engineer-in-charge.( incl necessary scaffolding ,upto 04 storey High of building). |
| 9 | M&L for applying one coat of oil emulsion distemper to old decorated surfaces of wall/ ceiling including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Demolition of stone slabs and floor/ wall tiles of any description or thickness in floors, aprons all as specified and directed . |
| 11 | M & L for colour Glazed ceramic tiles in vertical surface 600 X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm backing coat in CM 1:4 etc complete all as spd and as directed. |
| 12 | S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over screed bed 15 mm thick CM 1:6 all as directed. |
| 13 | M&L Granite (of any type) slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and like over and including 20mm thick cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. (upto 04 storey High of building) |
| 14 | M&L for Prepolished Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 15 | Description all as per above item here in before but as in riser to steps, skirting ,dado,window cills fixed with cement mortar 1:4 complete all as specified and as directed. |
| 16 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed. |
| 17 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed. |
| 18 | S&F 5.5 mm thick selected quality toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed, |
| 19 | S&F powder coated anodised aluminium doors frame for doors, windows, ventilators and partition with one or more rebates ncluding necessary jointing cleats, glazing clips rubber packing cleat for fixing etc complete all as specified. |
| 20 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 21 | S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed. |
| 22 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85-90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 25 | S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and as directed |
| 26 | S&F 125 mm long Aluminium handles, cast type, anodised complete all as specified and as directed . |
| 27 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 28 | Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed. |
| 29 | M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius buit in CM 1:6.complete all as specified and as directed. |
| 30 | M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius in half bricks built in C:M 1:6 complete all as specified and as directed. |
| 31 | Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 04 storey High of building) |
| 32 | M&L 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge.. (upto 04 storey High of building) |
| 33 | Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 34 | S&F sand cast pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 35 | S&F CI bend,diminishing piece with door of 100mm borewith duct, foot and heel rest complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 36 | S&F CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 37 | S/F CI cowl of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 38 | Taking down soil pipe/ rainwater pipes (any size or pattern ) including all fitings heads shoes bends swan -necks etc including cleaning or refixing or removal to store complete all as specified and as directed. |
| 39 | S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 40 | S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 41 | M&L for preparation New steel and iron surfaces apply two coat of synthetic enamel paint over one coat priming with red oxide of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed any height of bldg . note: colour should be approval of user requirment. |
| 42 | M&L for preparation old steel and iron surfaces apply two coat of synthetic enamel paint over one coat priming with red oxide of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed any height of bldg . note: colour should be approval of user requirment. |
| 43 | S&F pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified. |
| 44 | M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 45 | S & F MS angle,flats,etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250)quality A as in fencing posts including drilling holes for nuts and bolts and similar work complete all as specified and as directed. |
| 46 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed |
| 47 | Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in surface channel and drain all as specified and directed. |
| 48 | Forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc complete all as specified and directed |
| 49 | Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete all as specified and directed |
| 50 | M&L RCC 1:1½:3, type A1(NOMINAL MIX) (using 20mm grade stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.(NOTE: MS reinforcement shall be measured and paid seperately) |
| 51 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat all as specified and as directed by the Engineer-in-Charge. |
| 52 | Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm. complete all as specified and directed by Engineer-in-Charge. |
| 53 | Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm. complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm, complete all as specified and directed . |
| 56 | S&F in repair PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long, fancy type chromium plated angle valve of 15mm bore dia complete all as specified and directed . |
| 57 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 58 | S&F in repairs Vitreous china under counter / counter sunk wash hand basin white ,size 525x410x 210 mm , including PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends, and provision of PVC waste pipe 32mm of adequate length , CP waste coupling 32 mm dia of half or full threaded, chromium plated fancy type angle valve 15 mm dia bore, and taking down unserviceable wash hand basin complete all as specified and directed . |
| 59 | S&F in repair vitreous china urinals,full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, CP waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long ,CP urinal spreader,15 mm Angle valve fancy type chromium plated complete all as specified and directed. |
| 60 | S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing complete all as specified and directed. |
| 61 | S&F looking mirror any size , 6.00 mm thick of selected quality glass , fixed on 6 mm thick PVC moulded sheet with PVC moulded frame fancy type all around. Fixed to wall with PVC rawl plugs using chromium plated brass screws & cup washers complete all as specified and directed . |
| 62 | S&Fin repair 15mm long body Bib tap cast copper fancy type chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs. complete all as specified and directed . |
| 63 | S&F in repairs long body Pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia. Complete all as specified and directed . |
| 64 | S&F in repair Stop valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup (concealed type) complete all as specified and directed . |
| 65 | S&F in repair Angle valve cast copper chromium plated alloy15mm dia, screwed down, high pressure capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup complete all as specified and directed . |
| 66 | Supply and fix, CP shower rose with arm 15mm size and 195mm long with bend of 45 degree with flange of any colour all as specified and directed. |
| 67 | Supply and fix, shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour complete all as specified and directed . |
| 68 | Supply and fix Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed . |
| 69 | S & F in repair cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed . |
| 70 | M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed . |
| 71 | S&F Framed work such as grills, gratings, over drain etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed . |
| 72 | S&F in repair of 2000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical verticle with closed top) hoisted and fixed in position including suitable float valve fixed with GI pipe complete all as specified and directed. |
| 73 | Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in hard/ dense soil. |
| 74 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in hard/dense soil. |
| 75 | Returning,filling in, including,spreading,levelling,watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed. |
| 76 | Removing excavated material exc.250 m but n exc 500 m and depositing where directed. |
| 77 | M&L for hard core of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed. |
| 78 | M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and directed . |
| 79 | M&L PCC (1:2:4) type B-1 , using 20 mm aggregate in hold fast , in cills etc for window door frame etc and mass concrete complete all as specified and directed . |
| 80 | M&L for 100 mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in floor complete all as specified and directed. |
| 81 | M&L 15 mm thick cement plaster in CM (1:4) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed . |
| 82 | M&L Preparing new Surfaces of Walls and applying two Coats of Cement Base Paint over one coat of cement primer, complete all as specified and as directed. |
| 83 | S&F tensile fabric structure ( any type of curve design , cantilever , etc as approved design ) of mild steel tubular frame with red oxide coating over two coat of milky synthetic enamle white paint on complete structure with fabrication and erection and 900 Gsm fabric installation over structure complete as specified and directed. Make :Architectural membrane Fabric - Ferrari / S.R.F/ Sioen/ Heytex or equivalent ) (Note : Erection and fixing of structure at any height will include hydra or equvalent type of machines and will be provided by contractor) Scope of work and technical specification of structure and fabric shall not be less than below mentioned criteria :- 1. M.S Tubular frame work with one coat of red oxide primer and two coat of white enamle paint on structure , incl fixing of membrane ,plotting of structure , pattering and HF welding of membrane , waterproofing of structure , fixing of MS fitting incl metallic ribs etc. 2. M.S column 150 od x 3.50 mm thick , outer frame pipe 76 od x 3mm thick , Arch pipe 76 od x 3mm thick , Base plate 350x 350 x 10 mm thick , MS purlin pipe 60 od x 2.50 thick, aluminium flat bar 12 mm wide 1.50 mm thick. 3. Zinc primer then deco , with two coat enamle paint on structure. 4. Parking sheet Material 900 gsm fabric .5. Mode of measurement is as per top surface fabric area including structure (Cantilever structure) . 6. Structural design of Cantilever type /curve type shed for the required plan area shall be submitted by contractor after vetting/verified by any approved Govt engg collage / NIT/IIT. (Cost of Structural design and vetting shall be including in coated rate of the contract) |
| 84 | M&L for brick work with flyash old size bricks straight on plan exc 6m mean radius built in CM 1:6 complete. |
| 85 | M&L 15 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as directed. |
| 86 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in hard rock . |
| 87 | M&L PCC in foundations, filling and mass-concrete type C2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and as directed. |
| 88 | M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and as directed. |
| 89 | M&L for PCC 1:2:4 type B1 20mm graded aggregatea as in copping, bed hold fast etc.complete all as specified and as directed. |
| 90 | M&L for RCC type A1 nominal mix (1:1½:3) using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns up tp plinth beam or up to Ground level etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.(NOTE: MS reinforcement shall be measured and paid seperately) |
| 91 | M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 92 | M&L for Mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed. |
| 93 | S&F mild steel screw bolts neck dia 10 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long complete all as specified and directed |
| 94 | Use and waste of from work to sides of concrete for foundations, Fottings,bases of cols and Plinth beams and similar work for rough finished surfaces. |
| 95 | S & F ornamental MS framed work such as grills,gate,gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways,railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed. |
| 96 | M & L Providing precast reinforced cement concrete RCPC drainn cover 100 mm thick of size 600mm x 450 mm as in drain cover with capcity 3MT. |
| 97 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm th (below or above ground level) Note:(No extra cost to be borne by govt in r/o flooring overleaped with tile mozzic floor incl screed .Thickness to be considered as total thickness of overleaping) |
| 98 | Demolition of Reinforced cement Concrete in Roofs,floors ( other than ground floors) beams,staircases,landings,chajjas,lintel band and similar suspended works.(reinforcement cut as required to facilitate demolition) |
| 99 | Dismantling of false ceiling /insulation board/slabs /blanket any thickness including cover fillet all as specified and directed. |
| 100 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as speicifed and directed |
| 101 | Cutting Opening through brick /stone walls for door window coolers and other opening or enlargeing existing opening converting window into opening etc. cutting out defective brick work complete all as specified and as directed. |
| 102 | M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed |
| 103 | M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed |
| 104 | M&L Formwork to sides and soffits of floor or roof beam , beam hunching, girders, lintel, cantilevers, shelves including suports,overhangs etc complete all as specified and as directed. |
| 105 | M&L for Vitrified tiles coloured 600x600mm and 8mm to 10 mm thick as in floors jointed in neat cement slurrry and pointed in white cement slurry to match and over laid screed bed 15mm thick cement mortar 1:4 all as specified and directed. the shade of existing, complete all as sepcified and directed.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile), |
| 106 | All as per item ser No 108 but in vertical surfaces, complete all as sepcified and directed. |
| 107 | M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 108 | M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender