Tender For Repair To Sunken Slab, Soil And Waste Pipe And Connected B/R Work In Otm And Md Accn At Wellington Station Under Ge Wellington 8281/E8
Tender Value
42 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
20 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Sunken Slab, Soil And Waste Pipe And Connected B/R Work In Otm And Md Accn At Wellington Station Under Ge Wellington 8281/E8
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 2 | Demolition of unreinforced cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed. |
| 3 | Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 4 | Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 350x250x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface all as specified and as directed. |
| 5 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 at Sunken floor finished smooth and even without using extra cement incl using liquid integral WPC as per manufacturer instructions complete. Note: Supply of Integral water proofing compound will be measured and paid seperately. |
| 6 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 300 thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed. |
| 7 | 20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed. |
| 8 | Material and labour for low density polyethylene (LDPE) pipes of pressure rating 6Kgf/sq.cm 40 mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor complete all as specified and directed. |
| 9 | Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, in sunken portion complete all as specified and directed. |
| 10 | Supply only liquid water proofing compound all as specified and directed. |
| 11 | 25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed. |
| 12 | Coloured Non - skid Joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 13 | Coloured Non - skid Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/ Skirting etc. and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 14 | Vitrified Light Shade ceramic tiles 10mm thick (square/ rectangular) light grade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 15 | Vitrified Light Shade ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dado (Vertical Surface) etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:4 complete all as specified and directed. |
| 16 | Dismantling of PVC water tank 500 Ltrs capacity from existing position all as specified and directed. |
| 17 | Dismantling of PVC water tank 1000 Ltrs capacity from existing position all as specified and directed. |
| 18 | Dismantling of PVC water tank 2000 Ltrs capacity from existing position all as specified and directed. |
| 19 | Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 500 Ltrs hoisted and fixed in position with proper inlet and outlet connections all as specified and directed. |
| 20 | Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 1000 Ltrs hoisted and fixed in position with proper inlet and outlet connections all as specified and directed. |
| 21 | Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 2000 Ltrs hoisted and fixed in position with proper inlet and outlet connections all as specified and directed. |
| 22 | Lid for polyethylele water storage tank for 500 litres including fixing PTMT nut/ binding wire and fixed in repairs all as specified and directed. |
| 23 | Lid for polyethylele water storage tank for 1000 litres including fixing PTMT nut/ binding wire and fixed in repairs all as specified and directed. |
| 24 | Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe including fixed in repairs of size 20mm dia all as specified and directed. |
| 25 | Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing all as specified and directed |
| 26 | Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing all as specified and directed |
| 27 | 15mm bore steel water tubes medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified and directed. |
| 28 | 20mm bore steel water tubes medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified and directed. |
| 29 | Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed |
| 30 | Pre-cast cement concrete block masnory with solid block using type C1, 1:3:6 using 20mm graded stone aggregate exceeding 10cm in width and setting in mortar 1:6 complete all as specified and directed |
| 31 | Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or PCC block masonry work or concrete surfaces, finished even and smooth without using extra cement all as specified and directed |
| 32 | Vitreous china squatting pan Orissa pattern size 580mmx 440mm white water closet (squatt pattern) including porvision of lime concrete bedding with integral foot rest with 'p' or 's'trap including flush pipe PVC 32 mm dia for low level cistern complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, fixed in repairs, complete all as specified and directed. |
| 33 | Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern, seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed. |
| 34 | PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed. |
| 35 | Vitreous chian wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed. |
| 36 | Pillar tap, 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed. |
| 37 | Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed |
| 38 | Stop valves, fancy type, 15mm bore chromium plated with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed |
| 39 | Stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed |
| 40 | PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed. |
| 41 | Supply and fix in repairs chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 42 | Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 43 | Sheet Glass shelf assembly corner consisting of 5.5mm thick sheet glass shelf 12cm wide with chroumium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 44 | Supply and fix in repairs of Chromium plated soap dish complete all as specified and directed. |
| 45 | Supply and fix in repairs of Chromium plated towel ring square/ rectangular with round flange complete all as specified and directed. |
| 46 | Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including fixed in repairs all as specified and directed. |
| 47 | CP toilet paper roll holder with flat rrecessed type stainless steel fixed in repairs complete all as specified and as directed. |
| 48 | PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed. |
| 49 | Gratings 125mm dia with waste hole PTMT (Minimum weight 40gms) fixed in repairs complete all as specified and as directed. |
| 50 | 600 mm x 450 mm x 6 mm thick bevelled edges looking mirror of selected quality glass, mounted on wall and fixed with pvc/plastic plugs chromium plated brass screws and cup washers complete fixed in repairs all as specified and as directed. |
| 51 | Taking down PVC / wooden chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed. |
| 52 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing as mentioned in SSR all as specified and directed. |
| 53 | Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame made up of tubes shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as mentioned in SSR drawing all as specified and directed. |
| 54 | Fatory made UPVC white colour fixed glazed ventilator made of (small series) frame 47x50mm mullion 47x68mm both having wall thickness of 1.9± 0.2mm and single glazing bead of appropriate dimension (Area upto 0.75 Sqm) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drillng of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quiality, all complete as per approved drawing and all as specified and directed. |
| 55 | Butt hinge, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 56 | Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed. |
| 57 | Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed. |
| 58 | Taking down PVC/ CI pipe jointed in cement mortar, taking out wall and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) all as specified and as directed |
| 59 | PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 60 | PVC (SWR) Pipes 110mm dia bore single socketed in any length, with rubber ring joint fixed to walls with PVC clamps complete all as specified and directed. |
| 61 | PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 62 | PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with PVC clamp, complete all as specified and as directed. |
| 63 | PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed. |
| 64 | PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed. |
| 65 | PVC (SWR) junction single, (single T) equal or unequal of 75mm bore of pipe with access door complete all as specified and directed |
| 66 | PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore of pipe with access door complete all as specified and directed |
| 67 | PVC (SWR) branch piece single, (single Y) equal or un equal of 75mm bore of pipe with access doorcomplete all as specified and directed |
| 68 | PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe with access door complete all as specified and directed |
| 69 | PVC (SWR) branch piece, (double Y) equal or un equal of 75mm bore of pipe with access door complete all as specified and directed |
| 70 | PVC (SWR) branch piece, (double Y) equal or un equal of 110mm bore of pipe with access door complete all as specified and directed |
| 71 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed |
| 72 | Rendering 15 mm thick over concrete surfaces/stone wall/ brick wall/ over chajjas in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed |
| 73 | Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work / concrete surfaces, finished even and smooth without using extra cement compete all as specified and directed |
| 74 | Preparation of new plastered or unplastered surface of walls and applying two coats of distemper oil emulsion washable over a coat of alkali resistant primer complete all as specified and directed. |
| 75 | Preparation of new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS - 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and as directed. |
| 76 | Preparation of old treated ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying One coat of white wash complete all as specified and directed. |
| 77 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed. |
| 78 | 75mm thick Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub floor, sub bases, floors and pavings complete all as specified and directed |
| 79 | Chequred cement concrete coloured tiles 20cms x 20cms x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 80 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 81 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed |
| 82 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed |
| 83 | Concrete bed to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded aggregate for 150mm bore pipe all as specified and directed. |
| 84 | Reinforced Concrete pipes class NP-2 laid in trenches and jointed complete with collars of 150mm dia all as specified and directed. |
| 85 | Removing excavated soil/ material to a distance exceeeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 86 | Schedule of Credit (Minus) Rs. 45595.00 NOTE: Bidder shall insert credit amount of Rs. 45595.00 as rate in Green field under Col-5. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender