Tender For Periodical Services With Smart Periodical Methodology To Internal And External Surfaces Of Buildings At Technical Area At Af Station Suratgarh
Tender Value
50 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
13 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services With Smart Periodical Methodology To Internal And External Surfaces Of Buildings At Technical Area At Af Station Suratgarh
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (PERIODICAL SERVICES WITH SMART PERIODICAL METHODOLOGY TO INTERNAL AND EXTERNAL SURFACES OF BUILDINGS AT TECHNICAL AREA AT AF STATION SURATGARH) |
| 2 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed. |
| 3 | M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed. |
| 4 | Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 5 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling and surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 6 | M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed. |
| 7 | M&L for preparation of old plastered wall surfaces and applying two coats of white wash complete all as specified and directed. |
| 8 | M&L for Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 10 | &L for preparation of old plastered surfaces of ceiling and applying one coat of white wash all as specified & directed by Engineer-in- Charge. |
| 11 | M&L for preparation of old painted surfaces,of steel and iron over 10 cm width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrapers etc, filling in crevices and cracks etc with approved filer and applying one coat of Aluminium paint, complete all as specified and directed. Note : (a) The Spray machine should be with pro guard technology and capability of tracking pressure and accessories for applying paint should be able to spary in hard-to-reach areas and penetration of Paint on the surface. |
| 12 | M&L for preparation of old painted surfaces of steel and iron over 10 cm width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrapers etc, filling in crevices and cracks etc with approved filer and applying one coat of Aluminium paint, complete all as specified and directed. Note : (a) The Spray machine should with pro guard technology and capability of tracking pressure and accessories for applying paint should be able to spary in hard-to-reach areas and penetration of Paint on the surface. (b) The work shall be executed at height of more than 10 metre. |
| 13 | M&L for applying two coat of water based premium acrylic smooth exterior emulsion paint over and including one coat of primer @ 0.80 ltr (undiluted) /10 Sqm diluted with water in 1:1 ratio the newly prepared wall surface of approved colour with silicon additives, with heat Reflectant property and gives excellent protection against UV attack with VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algae properties in two coats diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI.Note : Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 14 | S&F of aluminium composite pannel (ACP) for wall cladding of colour (as approved by Engr-in charge) made out of 4 mm thick (wt not less than 5 kgs/m2) ACP material consisting of 3 mm thick FR grademineral core sandwiched between two aluminium sheets (each 0.5 mm thick). The ACP Pannel sheet shall be coil coated with Kynar 500 based PVDF/Lumiflon based flouropolymer resin coating of approved colour and shade on face # 1 and polymer (service) coating on face # 2 as specified including 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified. stainless steel screws, nuts, bolts, washers, cleats, etc with & as required or as per manufacturer instruction as per site requirements. complete all as specified and directed. |
| 15 | Supply only Integral waterproofing compound.complete all as specified and directed |
| 16 | S & F as in replacement 12 mm toughned glass as in hinged doors/ partitions/ automatic doors and similar works including cutting to shape drilling holes required complete all as specified and directed. |
| 17 | S&F as in replacement 12 mm thick toughned glass for door with proper grinding and rounding of edges , incl two no of stainless steel handle in each leaf ,handle size 45cm and 25mm dia. With lockin arrangement,hydraulic machine at the bottom for each door and pivots as per manufacture instruction,complete all as specfied and as directed . |
| 18 | Complete removal of existing treatment on walls etc by scraping and sanding with mechanical wall sander (having mechanical vacuum mechanism with dust carrying bag) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc by skilled labour complete all as directed. |
| 19 | M&L for complete removal of existing treatment on ceilings by scraping and sanding with mechanical wall sander (having mechanical vacuum mechanism with dust carrying bag) having RPM not less than 1500, sanding pad of diameter of 7\\"/9\\" using a 80 grit sanding paper to make the surface free from dust, loose paint etc by skilled labour complete all as directed. |
| 20 | M&L for waterproof cement based putty @ 1kg (undiluted) per sq mtr. Of average thickness 1mm over the prepare surface and finished even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltr per minutes with a maximum pressure 3300 PSIStep 3) Allow 6-8 hrs time to dry the putty surface |
| 21 | M&L for waterproof cement based putty @ 1kg (undiluted) per sq mtr. of average thickness 1mm over the prepare surface and finished even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad 240 Grit or above to make the surface free from dust etc. by skilled labour Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltr per minutes with a maximum pressure 3300 PSIStep 3) Allow 6-8 hrs time to dry the putty surface |
| 22 | M&L for one coat of acrylic water based interior grade primer on walls @ 0.8 ltr (undiluted)/10 sq mtr diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressurer of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats. |
| 23 | M&L for one coat of acrylic water based interior grade primer on ceiling @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressurer of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats. |
| 24 | M&L for applying two coats of oil bound distemper over newly prepared ceiling surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft.Note : The Spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 25 | M&L for applying two coats of oil bound distemper over newly prepared wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft.Note : The Spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 26 | M&L for preparing and applying two coats of oil bound distemper over old ceiling surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft.Note : The Spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 27 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed. |
| 28 | M&L Preparing untreated old Brick or concrete surface of roof and applying Two Coats of Cement base paint (plain/Camouflage pattern) with approved Tint over a coat of Primer complete all as specified and as directed. NOTE: (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush , washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with cement slurry wash. |
| 29 | M&L for two coat water based premium acrylic smooth exterior emulsion paint over the old treated stone surfaces over a coat of silicon based water repellent solution of Dr fixit 103 repell WR or equivalent (undiluted) in of approved colour with silicon additives, with heat Reflectant property and gives excellent protection against UV attack with VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algae properties in two coats diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI.Note : Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 30 | M&L for two coats of water based premium washable and high adhesion smooth exterior emulsion paint over the old treated Paver blocks/ Chequered tiles surfaces in approved colour , with high fading resistance and protection against UV attack and Anti Algae properties as per manufacturer instructions applied over clean surface with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSNote : Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 31 | M&L for melamine polish with scraping and cleaning of wooden door/wall panelling to remove existing polish, filling putty or the required hardeners for repairing of any wooden marks, scratches or scars and treated with putty/primer to obtained similar texture and mallamine coating on the surface with approved shade and make (MRF, Berger, Asian) on the surface doors to obtain smooth and uniform looking as complete all as specified & directed by Engr-in-charge. |
| 32 | S&F as in replacement new vertical venetian blinds of PVC special collection self adjusting system of louvers size 100mm wide (as approved by GE) with aluminium top rail and PVC bottom, weight attached with 100mm strip complete with chain all as specified and directed by Engr-in-charge. |
| 33 | S&F as in replacement roller blinds of any size and any colour (non-blackout series) with aluminium headrail, with chain operation complete all as specified and directed by Engr-in-charge. |
| 34 | Dismantling of wall and ceiling or insultation boards/slabs/PVC paneling any thickness and in any position incl frame grid and cover fillets and framework etc complete all as specified and directed. |
| 35 | S&F for 1.5 mm thick standard decorative preflexible/ semi rigid sheed fixed as in soffit/Louver boarding wood grain finish colour fixed on walls with nails/screws/pasting at site as per specification including covering cross sectional surface/ thickness with borders, complete all as specified and directed. |
| 36 | M&L 9 mm thick gypsum board/ file of size 600 x 600 mm laid over and including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed. |
| 37 | M&L 12 mm thick gypsum board/ file of size 600 x 600 mm laid over and including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed. |
| 38 | M&L for 16-18 mm dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including making v groove at top and bottom of stone and drilling hole for hold fastener/ fixing with CM ,1:3 polishing, rubbing & including silicon treatment,complete all as sepcified and as directed. |
| 39 | Demolition of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 40 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender