Tender For Addn / Altn To Various Smqs At C -Ii Of Air Force Station Kalaikunda
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
18 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn / Altn To Various Smqs At C -Ii Of Air Force Station Kalaikunda
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling granite on slab including cement mortar bedding( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)(unreinforced) |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for |
| 4 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm (without taking off shutters from the frames. |
| 5 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exc 4 sqm each(without taking off shutters from the frames. |
| 6 | Taking down cement plaster of any description on brick or stone walls or from concrete surface incl recking out joints hacking for key scrubbing with water etc all as sepcified. |
| 7 | Taking up or down steel tubing 15mm bore of pipe and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 8 | Taking up or down steel tubing 20mm bore of pipe and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 9 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings , steps , cills, sunshades , shelves , lintels etc and cutting chases for concealed wtaer tubing or concealed conduit wiring etc and making good, cutting exceeding 20cm girth |
| 10 | S&F Steel tubes, medium grade, galvanised with all fittings ISI marked and fixed concealed type complete to walls and ceilings or laid in floors, bore of tube 15mm all as specified. |
| 11 | S&F steel tubes, medium grade, galvanised with all fittings ISI marked concealed type and fixed complete to walls and ceilings or laid in floors, bore of tube 20mm complete all as specified and directed. |
| 12 | Demolition of Brickwork masonry, built in cement mortar at ordered portions including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete. |
| 13 | Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in old size bricks in 1:4 cement morter |
| 14 | M & L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick in CM 1:6 on fair face of brick work surfaces finished even and smooth with out using extra cement all as specified. |
| 16 | M&L for rendering 15mm thick in CM 1:4 on other tha fair face of brick work surfaces finished even and smooth with out using extra cement all as specified. |
| 17 | M&L for rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces as in ceiling, chajja, shelves etc finished even and smooth with out using extra cement all as specified. |
| 18 | M&L Preparation of new surfaces of ceiling including cornices, plasters applying three coat of white wash all as specified and directed. |
| 19 | M&L for Preparation of New surface of walls, chajja, facia and applying two coat of Exterior emulsion paint (weather coat) over one coat of primer complete all as specifed and as directed. |
| 20 | M&L for preparation of new decorated plastered or unplastered surface of walls and applying two coats of acrylic Emulsion distemper over one coat of primer any tint complete all as specifed and as directed. |
| 21 | M&L for preparation of old decorated plastered or unplastered surface of walls and applying two coats of acrylic Emulsion distemper over one coat of primer any tint complete all as specifed and as directed. |
| 22 | M&L for Preparation of old surface of walls, chajja, facia and applying two coat of Exterior emulsion paint (weather coat) over one coat of primer complete all as specifed and as directed. |
| 23 | M&L Preparation of old surfaces of ceiling including cornices, plasters applying two coat of white wash all as specified and directed. |
| 24 | M&L for Preparation of old surface of walls, chajja, facia and applying two coat of white wash complete all as specifed and as directed. |
| 25 | S&F 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as per specified and directed. |
| 26 | M&L 75 mm thick cement Concrete Type C2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed. |
| 27 | M&L 40 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) complete all as specified and as directed. |
| 28 | M&L for Chequered cement concrete tiles 30cm x 30cmx 25mm thick,set,jointed and pointed in neat cement slurry laqar finish with grey cement & pigment with glossy finish, with 15mm thick screed bed 1:6 cement mortar as per specified |
| 29 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:6 |
| 30 | M&L Glazed coloured ceramic tiles in vertical surfaces 450 x 350 x 7mm thick set joint in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 10mm thick for laying dado/skirting tiles etc complete all as specified and directed. |
| 31 | S&f anodized aluminium anti-skid stair edge/nosing 50mm wide ( or as approved) with ribbed insert for slip resistance fixed with stainless steel screws and suitable adhesive on the leading edge of staircase treads including cutting, drilling, finishing and all incident works complete as specified and directed |
| 32 | S&F 125x60mm pressed steel door frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed. |
| 33 | S&F 105x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified. |
| 34 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed. |
| 35 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed. |
| 36 | S&F MS butt hinges, heavy weight cold rolled 100 mm size. |
| 37 | S&F Aluminium bow handle cast type anidised 150 mm size. |
| 38 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed , length of bolt 250 mm size. |
| 39 | S&F Aluminium anodized barrel tower tower bolts of extruded sections and fixed of length of bolt 150 mm size. |
| 40 | S&F Mild steel semi barrel tower bolts, stove enamelled black, with bright boltand fixed of length of bolt 100 mm size. |
| 41 | S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated prelaminated both sides with decorative choice laminations, fixed with screws or fixed to timber frame work complete as specified and directed. |
| 42 | M&L for 12mm thick prelaminated particle board for self, shutter fixed in wall for modular kitchen all as specified and as directed |
| 43 | S&F continuous piano hinges mild steel bright finish or electrogalvanised all as specified and as directed |
| 44 | S&F hasp and staple mild, steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 45 | M&L 2nd class hard wood in scantling wrought timber unframed and fixed. |
| 46 | S&F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed by the Engr-in-charge. |
| 47 | 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass ( or gauge etc with out sash bars ) edges of framing plain chamfered or rounded fitted with out and mitered beads for securing glass etc sizes of members of shutters as specified in SSR part 1 section – 8 clause 8.24 (a), supplied and fixed to chowkats complete all as specified. |
| 48 | S&F 300mm rdinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 49 | S&F rubber door seal ( Snake Guard) minimum 50mm wide for door frame/bottom including fixing with adhesive, nails,screws complete all as specified and directed. |
| 50 | S&F floor door stopper of brass body and tongue anodized with hard drawn steel spring fixed in floor( Overall length of cover plate 150mm) |
| 51 | Cutting holes in brick walls n.exc half brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required (depth of embedded portion measured from the face of the jamb into the wall) |
| 52 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 53 | S & F steel windows with side hung shutter including projecting type hinges as with steel handle, steel peg stay complete with glazing bars dovetailed or welded including double lead for glass and wiremesh complete all as specified and directed. |
| 54 | Ditto but without glazing bars complete all as specified and directed. |
| 55 | S & F Steel windows or ventilators, fixed type, with glazing barscomplete all as specified and directed. |
| 56 | S&F 3 mm thick figured glass pin head type and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 57 | S&F stainless steelwire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 58 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 59 | M&L two coats of synthetic enamel paint to new wooden surfaces previously untrested surfaces including preparation of new surfaces over a coat of pink primer . |
| 60 | M&L two coats of synthetic enamel paint to new steel surfaces previously untreated including preparation of new surfaces over a coat oxide. |
| 61 | M&L in repairs harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. all as specified and as directed |
| 62 | M & L for PCC 1:2:4 type B1 using 20mm graded aggregate as in hold fasts, benching, coping, repair to chajjas, facia etc in window cills projecting type and similar work all as specified and as directed. Note : Necessary form work be included in the unit rate of this item. |
| 63 | S&F in repair Bib tap cast copper alloywith crutch or butterfly handle,chromium plated fancy type screwed for iron pipe, suitable for 15mm bore complete all as specified. |
| 64 | Dismantling water tank of capacity exceedihg 250ltrs but not exceeding 500 litres and removing to stores, complete all as specified and directed |
| 65 | S&F 500litres Rotational moulded polyethylene water storage tanks (Cylinderical veertical with closed top) hoisted and fixed in position including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all specified and directed. |
| 66 | S&F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed. |
| 67 | S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete, screwed for iron pipes or brasas ferrule and fixed. |
| 68 | S&F in repair stop valve cast copper chromium plated concealed type screwed down, high pressure with long shank and cup suitable for 15 mm bore complete all as specified. |
| 69 | S&F 15 mm bore angle valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 70 | S&F 2 in1 Bib Taps 15 mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed. |
| 71 | S&F steel kitchen plate rack made of 1.00 mm thick sheet of size 36\\" to 30\\" incl shelves, rod to put plates etc and fixed to wall complete all as specified and directed |
| 72 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchenor laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all specified and directed. |
| 73 | S&F in repair grating round 100 mm dia with waste hole of PTMT (minimum weight 25 grams) complete all as per specified and as directed by Engineer-in-charge. |
| 74 | S&F in repair pillar cocks fancy type, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or with out letter hot or cold with long screwed shanks and fly nuts screwed for GI pipes or for unions, 15mm size. |
| 75 | S&F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) with pedestal including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed. |
| 76 | S&F Mirror of size 600x450mm, beveled edged, of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated screws and and cup washers. |
| 77 | S&F in repair PVC down waste pipe 900-100mm long for wash hand basin fitted to 32mm dai waste coupling all as specified and directed |
| 78 | S&F in repair PVC down waste pipe 900-100mm long for Sink fitted to 40 mm dai waste coupling all as specified and directed |
| 79 | S&F in repairs brass chromium plated tubular towel rail 20mm dia complete all as specified and directed. |
| 80 | S&F in repair Brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 81 | S&F Brass CP mixer 15mmbore for mixing hot & cold water screwed down for iron pipe and fixed |
| 82 | S&F in repair vitreous china wash down water closet pan 580 x 440 mm (Pedestal pattern) white complete including seat cover, flush pipe including all joints, complete all as per specified and as directed by Engineer-in-charge. |
| 83 | S &F chromium plated health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long easy Flex tube in chrome finish complete all as directed . . |
| 84 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern, low level, white , with inlet ball valve float and handle including brackets including flush pipe of polythylene of 32 mm dia for low level cistern, complete all as specified and directed. |
| 85 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mmcomplete all as specified and directed. |
| 86 | Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed |
| 87 | Demolition of cement concret(reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 88 | M&L,flat rough finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc all as specified & all as directed |
| 89 | M&L for RCC Nominal mix (20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc all as specified and directed. |
| 90 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 91 | S&F 32 mm bore dia of discharge pipe waste coupling of PTMT (minimum 45 gm weight) (half or full threaded), complete all as per specified and as directed by Engineer-in-charge. Make - Prayag, Supreme , Prince |
| 92 | S&F 40 mm bore dia of discharge pipe waste coupling of PTMT (minimum 45 gm weight) (half or full threaded), complete all as per specified and as directed by Engineer-in-charge. Make - Prayag, Supreme , Prince |
| 93 | M&L for Ready mix mortar ( Polymer Modified mortar of redispersible polymer powder type) by means of making good of any exposed reinforced surface of chajja, lintel, bend cill, reinforced beam or any other fallen surface by means of cleaning old rusted surface of reinforcement by applying (a) alkaline rust removing chemicals on exposed reinforces surface (b) epoxy based zinc rich primer over reinforced surface (c) epoxy bonding agent of Sika Top -122 HS or equivalant as per manufacturer direction complete all as per specified and as directed ( notes: rate are deemed to be included with necessary formwork in repair upto G+3 storied building ) Make: Sika Top-122 HS or equivalent. |
| 94 | M&L for applying waterproofing treatment on Damp affected wall surface using two componenet acrylic polymer modified cementitious high performance coating of approved make in two coats including preparation of surface by cleaning of surface removal of plaster/putty etc complete all as per specified and as directed by engr-in-charge.( Make: Asian paint Smartcare Damp BLOCK 2K) |
| 95 | M&LCrack filling Crack Filling: a) Surface Preparation - Mild Chipping of the surface, Clean the Surface with Nano Bio wash. b) Open the Crack with \\"V\\" Shape and clean the surface c) Apply Nano carbon fibre high penetration bond coat coating base 4 and active part 1d) Apply Nano polymer filler base 3: active part1 , properties zero shrinkage high strengthe) Apply Nano carbon fibre high penetration bond coat coating base 4 and active part 1 top coat f) Providing and applying Nano Barrier Coat Paint/ Nano Water Base Water Proof coating 2 coats over screed concrete using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat. |
| 96 | Complete removal of existing treatment on wall/roof /roof projectionprojections including facia, cornices etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free, from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 97 | Material and labour for providing plain cement concrete with Nano filter 1; cement 1; sand 2; aggregate 4; type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed withg integral water proofing liquid admixture as per manufacturer's instruction complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 30 mm.(ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after(iii) PCC shall be laid to achieve true slope towards the drain/ weep holes. |
| 98 | Material and labour for applying a coat of Nano technology based water proofing compound (1 part powder : 1 part liquid) of desired consistency with nylon brush @ 5 sqm/ kg coverage over vertical/ horizontal surface of RCC roof and parapet complete all as specified. |
| 99 | M&L water proofing :(a) Surface Preparation - Mild Chipping of the surface , clean the surface with Nano Bio wash. (b) If online leakage found seal with nano magic and apply nano bond open the cracks by making 'V' groove , filling cracks with Nano Crack Filler.(c) Apply Nano carbon based shorted chain Nano bond coat(d) Providing and applying Nano water Base water proof compound one coats with surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect free nano-particles with inhibiting characteristics having bacteria killing rate above 98% and anti fungal properties, with super-hydrophobic properties with contact angle of water more than 75 degree, permeable type with elongation (stretch ability) of more than 300% in a nano--structured self assembled dispersion system with VOC level of less than 1%, 60 micron DFT.e) If ant crack found open and fill the crack with nano carbon base filler and bond coat and use nano wall filler to reduce the undulation.(f) Apply Nano high penetration Bond coat two coat.(g) Providing and applying Nano Barrier coat paint/ Nano water base water proof paints 2 coats over screed concrete using brush , not containing toxic materials like Pb , Cr, An; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with superhydrophobic properties with contact angle of water more than 750, with elongation (stretch ability) of more than 300% in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat |
| 100 | S&F PVC (SWR) bends any radius 75 mm,laid in trenches or in floors complete all as specified and as directed. |
| 101 | S&F PVC (SWR) junction single,(single T ) equal or unequal of any radius 110 mm, laid in trenches or in floors complete all as specified and as directed. |
| 102 | S&F PVC (SWR) bends any radius 110 mm,laid in trenches or in floors complete all as specified and as directed. |
| 103 | S&F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement. |
| 104 | S&F 75 mm dia PVC (SWR) pipes single cocketed , in any length , laid in trenches or in floors |
| 105 | Ditto all as per item above but 110mm bore dia |
| 106 | M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 100 mm bore. |
| 107 | Removal of unserviceable material obtained from demolition to a distance of exc 250m but n. exc 1000m beyond the lead included in the rates, including loading, unloading and stacking at the destination, |
| 108 | Taking down copper/aluminiumpoint wiring (light,fan, socket of power) complete including fixture and fittings such as switches, celing roses, Pedants, regulators, sockets, light fitting etc for taking credit (credit for above items should be made as per conditions separately) and making good disturabed surfaces of works etc complete all as specified and as directed. |
| 109 | M&L for point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. |
| 110 | M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :- (a) One light point/bell point controlled by one way switch 5/6 amps. |
| 111 | (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 112 | (c) One 3 pin socket out let 5/6 amps point on the independent board. |
| 113 | (d) One 3 pin socket outlet 5 amps on the same board with other switches |
| 114 | (e) One 3 pin socket out let 5 & 15 amps point on the indipendent board with 2.5 sqmm copper wire. |
| 115 | (f) One light point controlled by two 2-way switches, with cables 1.5 sq. mm size |
| 116 | S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 117 | S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed. |
| 118 | S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed. |
| 119 | S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed. |
| 120 | S&F Modular switch 2 way 6A, 1 module , 230 volts, (ISI marked) complete all as specified and as directed. |
| 121 | S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed. |
| 122 | S&F in ceiling rose, 3 terminal ,bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 123 | S&F Modular Bell push 6A 1 module, 230 volts.complete all as specified and directed. |
| 124 | S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed |
| 125 | S & F White cover plate with frame, 1 module complete all as specified and directed. |
| 126 | S & F White cover plate with frame, 4 module complete all as specified and directed. |
| 127 | S & F White cover plate with frame, 3 module complete all as specified and directed. |
| 128 | S & F White cover plate with frame, 6 module complete all as specified and directed. |
| 129 | S & F Metal flush box 1 module complete all as specified and directed. |
| 130 | S & F Metal flush box 4 module complete all as specified and directed. |
| 131 | S & F Metal flush box 3 module complete all as specified and directed. |
| 132 | S & F Metal flush box 6 module complete all as specified and directed. |
| 133 | S&F IP 20, class I, LED light 1X20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified. |
| 134 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblockscomplete all as specified and directed. |
| 135 | S & F new energy saving rechargable LED bulb 9 Watt, Base-22, 240 V , CCT- 6500K polycatbonate body , Lamp life 15000 Working Hours complete all as specified and directed. |
| 136 | Taking down carefully Ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified and directed. |
| 137 | M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, all as specified and as directed. |
| 138 | S&F of Bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaire efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting complete all as specified. |
| 139 | S & F exhaust fan made of sturdy engineering plastic complete with louver shutter voltage ,230V,50Hz,RPM 1200, copper winding of sweep 250 mm including cutting holes complete all as specified and directed. |
| 140 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 141 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB\\"S/lsolators complete all as specified and directed. |
| 142 | S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed. |
| 143 | S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed. |
| 144 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete specified and as directed. |
| 145 | S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, incl necessary connection complete all as specified and directed. |
| 146 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 25 sqmm 4 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. |
| 147 | Supply and fix Galvanised pipe Tube of size 50mm , 'light grad', with all fitting , laid in trenche complete all as specified and directed. |
| 148 | M&L for Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connectede to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of brass of HS steel all as shown in electrical plate No 3 connected to earthing test point and necessary excavation and earth work PCC (1:2:6) type C-I with suitable size of CI cover plate with angle iron frame and opening arrangement). including providing charcoal or coke and common salt in alternate layer of 15 cm compacted thickness all around the earth electrode with funnel and 50 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect, protected by 50 mm bore (light grade) galvanized iron pipe up to earthing test point as directed, incl disposal of surplus soil to a distance not exc 50 Mtr and necessary testing on completion complete all as specified and as directed.Note : - Earth strip beyond 7.5 mtr shall be measured and paid separately |
| 149 | Supply and fixing 3 pole MCCB 125 Amp 50 Hz 415 Volts with rupting Capacity 16 KA with Encloser for Existing Panel complete all as specified and directed. |
| 150 | Excavation in trenches, not exc. 1.5m wide and n. not exceeding 1.5m in depth for foundation , etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out in soft/Loose soil all as directed. |
| 151 | Returning , filling in , including spreading, levelling , watering and well ramming in layers not exc 25 cm thick in soft/lose soil complete all as specified and as directed. |
| 152 | Removing excavated soil to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5m above the stating point complete all as specified and as directed. |
| 153 | M&L for Sand cushioning/covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.Note :- Punned thickness will be measured at the time of measurement and payment. S & F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, including taking down old u/s complete all as specified and directed by EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender