Tender For Repair/ Maintenance Of Ceiling Fan, Exhaust Fan, Pedestal Fan, Wall Mounted Fan, Air-Circulators, Electrically Operated Turbo Ventillators And Allied Works At Technical Area At Af Stn Jodhpur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Ceiling Fan, Exhaust Fan, Pedestal Fan, Wall Mounted Fan, Air-Circulators, Electrically Operated Turbo Ventillators And Allied Works At Technical Area At Af Stn Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down and dismantling the ceiling fan/ exhaust fan/ pedestal fan/ wall mounted fan/ air circulators/ flame proof ceiling fan/ desert cooler of any sweep and size from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc. and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24/ 0.20mm with necessary connector (for blade/ body) as required after rewinding complete all as specified and directed. Note:- (a) Spares used shall be measured and paid seperatly under relevant items.(b) Re-winding shall be measured and paid seperately under relevant item. |
| 2 | M&L for rewinding of ceiling fan of any sweep and size using super enamelled copper conductor cable of suitable gauge including insulation, varnishing, packing, etc. complete all as specified and as directed. |
| 3 | Supply only ball bearing suitable for ceiling fan of any sweep and size complete all as specified and directed. |
| 4 | Supply only brass bush suitable for the ceiling fan of any capacity complete all as specified and directed. |
| 5 | Supply only shaft for ceiling fan complete all as specified and directed. |
| 6 | S&F in repair shakle and clamps including, rubber bush, bolts, nuts and split pin, fastners etc. for hanging of any sweep and size ceiling fan on roof top complete all as specified and directed. |
| 7 | S&F in repair MS down rod of size 15mm bore, 18\\" long including making holes etc. complete all as specified and directed. |
| 8 | S&F in repair MS down rod of size 15mm bore 12\\" long including making holes etc. complete all as specified and directed. |
| 9 | S&F in repair blades set suitable for ceiling fan of 1200mm/ 1400mm sweep, any make as per site requirement complete all as specified and directed. |
| 10 | S&F in repair modular fan step regulator, 120 W, 2 module complete all as specified and directed. |
| 11 | S&F in repair stepped type electronic fan regulator, flush type, on the existing phenolic laminated sheet etc. as required complete all as specified and directed. |
| 12 | S&F in repair fan capacitors of size 2.5 MFD complete all as specified and as directed. |
| 13 | S&F in repair fan capacitors of size 4 MFD complete all as specified and as directed. |
| 14 | S&F in repair rewound flame proof ceiling fan motor including dismantling, rewinding with super enamelled copper wire, insulation, varnishing, re-assembly, testing and commissioning complete all as specified and directed. |
| 15 | S&F in repair bearing for flame proof ceiling fan including dismantling, replacement of defective bearing, greasing, re-assembly, testing and commissioning complete all as specified and directed. |
| 16 | S&F in repair capacitor for flame proof ceiling fan including dismantling, replacement of defective capacitor, connection, testing and commissioning complete all as specified and directed. |
| 17 | S&F in repair rewound flame proof exhaust fan motor including dismantling, rewinding with super enamelled copper wire, insulation, varnishing, re-assembly, testing and commissioning complete all as specified and directed. |
| 18 | S&F in repair bearing for flame proof exhaust fan including dismantling, replacement of defective bearing, greasing, re-assembly, testing and commissioning complete all as specified and directed. |
| 19 | S&F in repair capacitor for flame proof exhaust fan including dismantling, replacement of defective capacitor, connection, testing and commissioning complete all as specified and directed. |
| 20 | Supply only ball bearing suitable for exhaust fan of any sweep and size complete all as specified and directed. |
| 21 | Supply only rotar for exhaust fan etc. complete all as specified and as directed. |
| 22 | Supply only brass bush suitable for exhaust fan of any capacity complete all as specified and as directed. |
| 23 | Supply only shaft for exhaust fan complete all as specified and as directed. |
| 24 | S&F in repair metalic body round/ square type shutters suitable for upto 450mm sweep exhaust fans, colour - Grey complete all as specified and directed. |
| 25 | S&F in repair steel wire mesh net mosquito alongwith aluminum frame, shape in round/ square type suitable for upto 450mm sweep exhaust fans including necessary fixing materials complete all as specified and directed. |
| 26 | M&L for cutting holes 300mm/ 450mm diameter for preaparing opening through brick/ stone masonary wall for fixing exhaust fan 300mm/ 450mm sweep, making good to damaged surface of wall, make a smooth circular/ square surface and match with specification of existing wall complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F louvers for exhaust fan of size 225mm to 450mm sweep, suitable for existing shape and size including taking down existing unserviceable/ rusted louvers complete all as specified and directed. |
| 28 | M&L for rewinding of air circulator fan of any sweep and size using super enamelled copper conductor cable of suitable gauge including insulation, varnishing, packing, etc. complete all as specified and as directed. |
| 29 | Supply only ball bearing suitable for air circulator fan of any sweep and size complete all as specified and as directed. |
| 30 | Supply only rotar for air circulator fan complete all as specified and as directed. |
| 31 | Supply only brass bush suitable for air circulators of any capacity complete all as specified and as directed. |
| 32 | Supply only shaft for air circulators complete all as specified and as directed. |
| 33 | S&F in repair 10mm thick MS plate, nuts and bolts, rubber packings, suitable for connecting with air circulators stand of sweep/ size upto 750mm alongwith switch box for speed controlling in four position including control wiring and required accessories for fixing air-circulators of any type of wall/ steel structures complete all as specified and directed. |
| 34 | S&F in repair sheet metal enclosures with socket plug top and MCBs having single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, 240 V complete all as specified and as directed. |
| 35 | Supply only ball bearing suitable for desert cooler of any sweep and size complete all as specified and as directed. |
| 36 | Supply only rotar for desert cooler etc. complete all as specified and as directed. |
| 37 | Supply only brass bush suitable for the desert cooler of any capacity complete all as specified and as directed. |
| 38 | Supply only shaft for desert cooler complete all as specified and as directed. |
| 39 | M&L in repairs for point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC conduit 20mm dia, medium grade, ISI marked, with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes, factory made, 1.6 mm thick, dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) for fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, requlators etc. and contineous PVC insulated and unsheathed 1.5 Sqmm copper conductor cable multistrand as earth wire, complete all as specified and as directed.Note:- Necessary chases cuttings for concealed wiring and making a good of distrubed surfaces shall be measured and paid under relevant items. |
| 40 | All as per item No. 39 above but 3 pin socket outlet, 5 Amp on independent board. |
| 41 | All as per item No. 39 above but 3 pin socket outlet, 5/ 6 Amp on same board. |
| 42 | All as per item No. 39 above but with 2.5 Sqmm cable for independent one 6 pin 6/ 16 Amps socket outlet in and including 2.5 Sqmm PVC insulated copper conductor unsheathed 1100 Volts grade IS-694 FRLS cable for continuous earth wire. |
| 43 | S&F in repair switch piano, 6 Amps, flush type, single pole, one way complete all as specified and as directed. |
| 44 | S&F in repair switch piano, 16 Amps, flush type, single pole, one way complete all as specified and as directed. |
| 45 | S&F in repair socket outlet, flush type, 5 pin, 6 Amps complete all as specified and as directed. |
| 46 | S&F in repair socket outlet, 2 in 1, 5 pin, 16 Amps, flush type complete all as specified and as directed. |
| 47 | Supply, installation, testing and commissioning in repair 100 Watt RGB LED flood light fitting capable of producing multiple colours through remote/ control system, suitable for outdoor/ building facade lighting, complete with die-cast aluminium housing, high efficiency LED module, driver, IP-65/ IP-66 protection, mounting bracket, necessary nuts, bolts, clamps, wiring with suitable size copper conductor cable, earthing and fixing at required height including drilling, supports etc., complete as per manufacturer’s specifications and as directed by Engineer-in-Charge. |
| 48 | Supply and installation in repair of LED tiranga (tricolor) rope/ strip light comprising saffron, white and green colour LEDs in single strip suitable for outdoor/ building facade decoration, complete with IP-65 weather proof flexible housing, LED driver, necessary connectors, control gear, fixing accessories, mounting on wall/ pole/ building surface with clamps, saddles, screws, wiring with suitable size copper conductor cable, plug top, earthing etc., complete as per manufacturer’s specifications and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 49 | Supply and installation in repair of LED tiranga (tricolor) rope/ strip light comprising saffron, white and green colour LEDs in single strip suitable for outdoor/ building facade decoration, complete with IP-65 weather proof flexible housing, LED driver, necessary connectors, control gear, fixing accessories, mounting on wall/ pole/ building surface with clamps, saddles, screws, wiring with suitable size copper conductor cable, plug top, earthing etc., complete as per manufacturer’s specifications and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender