Tender For Special Repair To Single Jcos Living Accn (Bldg No. T-04 Fd Hosp And Bldg No. T-77 Armd Regt) Under Age B/R-Ii Of Ge (South) Mamun
Tender Value
38.24 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
13 days left
EMD
76488
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Single Jcos Living Accn (Bldg No. T-04 Fd Hosp And Bldg No. T-77 Armd Regt) Under Age B/R-Ii Of Ge (South) Mamun
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl dismanling of existing AC sheets any type complete all as specified and directed. |
| 2 | S&F in repairs Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 600 mm width of an ecofriendly colour having tensile strength of 550 Mpa as in ridges/valley , fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F in repairs False ceiling of 9mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/Hangers 4 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs/trusses complete all as specified standard galvanised sections in a grid size of 600mmx600mm including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. |
| 4 | S&F Plain, galvanised, mild steel sheeting, 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, joints welded or soldered complete all as specified and directed. |
| 5 | M&L for Providing and injecting chemical emulsion for Post Constructional along the external wall along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed. |
| 6 | M&L for Providing and injecting chemical emulsion for termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed. |
| 7 | M&L for Providing and injecting chemical emulsion for termite Treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 9 | M&L for 75mm thick Cement concrete 1:3:6 type C-1, (using 20mm graded aggregate) as in plinth protection and paving laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight incl demolition and complete all as specified |
| 10 | M&L for vitrified ceramic tiles, coloured, heavy duty, non skid (joint free) 12 mm thick, exterior grade, area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 11 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes all as spd and directed incl dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 12 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over 10 mm thick renering in CM 1:4 for laying floor finishes all as spd and directed incl dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 13 | M&L for non skid ceramic coloured tiles (joint free) 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 14 | M&L for glazed ceramic coloured tiles 450x350x7mm thick, in vertical surfaces such as skirting and dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed. |
| 15 | M&L for 16-18mm thick Green Marble / Bhaisiana Zebra (any type) (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl edge moulding to give high gloss finish complete all as specified and directed. |
| 16 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq.m with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 17 | Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 22 | S&F 35mm thick single piece Factory made wire gauge door shutters including of wire cloth (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S tube 19 SWG, size 19mm x19 mm complete in all respect with lock rail and beautified by PVC beading all around fixed with PVC solvent cement complete all as per Drawing No CEPZ/TD-378/ Sheet 1/1 dated 27/12/2011 complete all as specified and as directed . |
| 23 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 incl taking down existing one complete all as specified and directed |
| 24 | Dismantling structural steel work including doors, gates butexcludingframed truss etc complete all as specified and directed. |
| 25 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work etc complete all as specified and directed. |
| 26 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410W Gde E250 quality A complete all as specified and directed |
| 27 | S& F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 28 | S& F in repairs 18 mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet for cupboard / Kitchen cabinet shutters and frames having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 kg/ cum and the weight of sheet of 1 sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, termite proof, fire retardant, manufacured by single layer extrusion process with excellent screw holding capacity and shore D hardnesscomplete all as specified and directed. |
| 29 | S & F Continuous (piano) hinges 30 mm flap when open, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 30 | M&L 100 mm Hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.. |
| 31 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 32 | S&F 3 mm sheet glass (for windows), ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work complete all as specified and directed. |
| 33 | S&F 3 mm sheet figured (frosted) glass,pin headed, ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work with oil putty/wooden beadscomplete all as specified and directed. |
| 34 | S & F Stainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beads complete all as specified and directed. |
| 35 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 36 | S F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.. |
| 37 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 38 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 39 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy acomplete all as specified and directed. |
| 40 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 41 | S & F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 42 | S&F magnetic ball catcher for cupboards fixted with brass screws complete all as specified and directed. |
| 43 | S&F floor door stopper of 150mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 44 | S&F in repairs 20 mm bore mild steel drapery rods with 1 mm thick PVC wood grain coating including brackets and knobs fixing on windows and doors for hanging curtains incl taking down old cutain rods complete all as specified and directed. |
| 45 | S&F stainless steel peg set of six of size 400mmx30mmx3mm size fitted with machine screw and wooden and plastic cleats (minium wt 190gms) complete all as specified and directed. |
| 46 | Taking down cement plaster, hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster complete all as specified and directed. |
| 47 | M&L for 15 mm thick rendering in two layers (10 mm thick in cement mortar 1:6 and 5 mm thick in CM 1:4) with water proofing compound) mixed with WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.Note: Water proofing compound shall be measured and paid for separately. |
| 48 | M&L for rendering 10 mm thick plaster in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 49 | M&L for 5 mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling/chajjas/fascia etc. and finished even and smooth without using extra cement & preparation of newly plastered surface complete all as specified and directed. |
| 50 | M&L for preparation of new plastered surfaces of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 51 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 52 | M&L for two coats of exterior acrylic emulsion (applied (@1.67 litre per sqm) over and including one coat of exterior grade primer (applied @2.20 litre per sqm) on newly plastered / un-decorated plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 53 | M &L for preparation of New surfaces of iron or steel of any discription exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 54 | M &L for Preparation of old painted surfaces of steel of any discription exc 10cm width or girth and providing one coat of synthetic enamel paint complete all as specified and directed. |
| 55 | Demolition of brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 56 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 57 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water.(b) Applying bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap.(d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane.(e) APP Membrane shall be stick inside parapet where available by cutting, chases and sealed with PCC 1:2:4, type B-0, complete all as specified and directed. |
| 58 | S&F in repair Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed complete all as specified and directed. |
| 59 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 60 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) fancy type, chromium plated, with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 61 | S&F in repairs 15 mm bore brass Chromium plated WHB mixer for mixing hot & cold water, screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F in repairs 15 mm bore brass Chromium plated wall mixer for mixing hot & cold water, screwed for iron pipe and fixed complete all as specified and directed. |
| 63 | S&F in repairs mirror cabinet 600 mm x 450 mm with mirror of selected quality 5 mm thick glass with shelves for storing toilet items fixed with chromium plated brass screws and cup washers complete all as specified and directed |
| 64 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 65 | S & F in repairs Vitreous china wash basin of size 550x400mm, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , all as spd and directed |
| 66 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed. |
| 67 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 68 | Supply & fixed CP Brass swivel shower rose 200x200 mm size with brass arm 450-550mm long complete all as specified and directed. |
| 69 | S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified. |
| 70 | S& F in repairs PVC corner shelf assembly consisting of with chromium plated bracket guard and railing complete all as specified. |
| 71 | S&F in repair towel rail brass chromium plated 600 mm long, 'D' type, fixed with SS screws complete all as specified and directed. |
| 72 | S&F Soap dish 120mm x 85mm (material SS finish, glossy) fixed to plugs with CP brass screws complete all as specified and directed. |
| 73 | S&F Stainless steel Grating doom 100mm dia complete fixing in floors complete all as specified and directed. |
| 74 | Taking up or down steel tubing 15mm bore with fittings complete all as specified and directed |
| 75 | Taking up or down steel tubing 20mm bore with fittings complete all as specified and directed |
| 76 | S&F Tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down existing complete all as specified and directed. |
| 77 | S&F Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 78 | Dismantling of cast iron soil, waste and vent pipes 100mm bore dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 79 | Dismantling of cast iron soil, waste and vent pipes 75mm bore dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 80 | Dismantling of cast iron soil, waste and vent pipes 50mm bore dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 81 | S&F100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps incl complete all as specified and directed. |
| 82 | S&F 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches complete all as specified and directed. |
| 83 | S&F 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps complete all as specified and directed. |
| 84 | S&F 50 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps incl dismantling of CI Pipe complete all as specified and directed. |
| 85 | S&F 50 mm dia sand cast Cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with oval access and jointed with neat cement paste complete all as specified and directed. |
| 86 | S&F 100 mm dia sand cast Cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) and jointed with neat cement paste complete all as specified and directed. |
| 87 | All as per description of serial item No. here-in-before but with oval access door |
| 88 | S&F 75 mm dia sand cast Cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) and jointed with neat cement paste complete all as specified and directed. |
| 89 | All as per description of serial item No. here-in-before but with oval access door |
| 90 | S&F cast iron Branch pieces, 100mm bore dia, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors complete all as specified and directed. |
| 91 | S&F cast iron Branch pieces, 75mm bore dia, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors complete all as specified and directed. |
| 92 | S&F in repairs cast iron floor trap 100mm dia of outlet, with CP grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B-1 using 12.5mm graded stone aggregate complete all as specified and directed. |
| 93 | S&F in repairs cast iron floor trap 75mm dia of outlet, with CP grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B-1 using 12.5mm graded stone aggregate complete all as specified and directed. |
| 94 | S&F in repairs cast iron gully/nahani trap 100mm dia of outlet, with CP grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B-1 using 12.5mm graded stone aggregate complete all as specified and directed. |
| 95 | S&F cast iron cowl 75mm bore dia jointed with cement complete all as specified and directed. |
| 96 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe complete all as specified and directed. |
| 97 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe complete all as specified and directed. |
| 98 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 50 mm dia CI pipe complete all as specified and directed. |
| 99 | S&F triple layer Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed. |
| 100 | M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 20 cm girth in brick walls complete all as specified & directed. |
| 101 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 102 | S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 103 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level all as specified and directed. |
| 104 | M & L for 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed |
| 105 | M&L for 75mm PCC 1:4:8: type D-2 (using 40 mm graded aggregate) in floors as sub base, surface finished even and rough to receive top floor finish complete all as specified and directed. |
| 106 | M&L for Machine Pressed rubber moulded precast concrete interlocking paver block any shape and size M-35 Grade, 60mm thick confirming to IS-15658-2006 with grey cement and pigments, top 6-8mm thickness gloosy finish coloured, epoxy coated, laid complete all as specified & directed. Note:- Sand cushioning shall be measured and paid separately. |
| 107 | M&L for sand cushioning under paver blocks including watering and levelling to the required gradient complete all as specified and directed. |
| 108 | M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 109 | Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level all as specified and directed. |
| 110 | Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 111 | M & L for reinforced cement concrete M-25 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed. |
| 112 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 113 | Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, cables, pipes etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed. |
| 114 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified & directed. |
| 115 | Removing surplus excavated spoil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting pointcomplete all as specified & directed. |
| 116 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable and punned complete all as specified.Note:- Punned thickness of cushioning shall be measured for payment. |
| 117 | Supply, laying & jointing in repair electric cable, LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty, with aluminium conductor of size 10 Sqmm 2 core in trenches or fixed to wall/pole or passing through ducts or pipe, including taking out existing cable complete all as specified and directed. |
| 118 | Supply, laying & jointing in repair electric cable, LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty, with aluminium conductor of size 25 Sqmm 4 core in trenches or fixed to wall/pole or passing through ducts or pipe, including taking out existing cable complete all as specified and directed. |
| 119 | Supply and laying bricks sub class 'B' old size, well burnt laid flat for cable protection abutting each other, laid dry with length of brick, width equal to width of protection, complete all as specified and directed. |
| 120 | Supply & laying in repairs galvanised steel tubing, light grade 40mm bore dia, laid for protection of cable, in trenches, floors etc. complete all as specified and directed. |
| 121 | M & L for 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floor etc complete all as specified |
| 122 | S& F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 123 | Removing existing roof treatment (any type) by picking, sweeping/brushing clean and washing down with water to remove dust and apply neat cement slurry wih 3.0kg cement per sq metre. |
| 124 | M&L of 20mm thick cement plaster on roof top in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 kg of Cement after sweeping/brushing clean and washing down with water as specified and directed. |
| 125 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified & directed. |
| 126 | M&L for point wiring for one light/fan/bell point controlled with one switch with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit (ISI Marked) medium grade not less than 20 mm dia with all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators/socket /bell push etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke multistranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall,making good the disturbed surfaces to match with the existing complete all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note :In ceiling Portion surface conduit wiring shall be carried out complete all as specified & directed. |
| 127 | All as per description of serial item No. 123 here in before but o for two-way light point controlled by 2 switches |
| 128 | All as per description of serial item No. 123 here in before but one 5 pin socket out let 5/6 Amps on same board with other switches. |
| 129 | All as per description of serial item No. 123 here in before but one 5 pin socket out let 5/6 Amps on independent board |
| 130 | All as per description of serial item No. 123 here in before but for 2 in 1, 15/16 amp multipurpose socket outlet/metal plug top with 2.5 sqmm FRLS cable PVC insulated unsheathed multistrand including 2.5 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 131 | All as per description of serial item No. 123 here in before but for 2 in 1 15/16 amp multipurpose socket outlet/metal plug top/ Geyser with 4 sqmm FRLS cable PVC insulated unsheathed multistrand including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 132 | S&F Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 133 | S&F Switch piano flush button single pole two way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 134 | S&F multi purpose socket outlet for 2 & 3 pin, 6A, flush type complete all as specified and directed. |
| 135 | S&F switch piano, flush type, single pole, one way, 16 Amps 230 Volts complete all as specified and directed. |
| 136 | S&F socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed. |
| 137 | S&F in repairs bell push switch, piano flush button single pole, one way, 5 Amps 240 volts polycarbonate body complete all as specified and directed |
| 138 | S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed. Please Enable Macros to View BoQ information |
| 139 | S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender