Tender For Paharpur-Swarupganj Road Bituminous Potholes Repairing Work From 0.00 Kmp To 3.50 Kmp, From 3.50 Kmp To 4.70 Kmp, From 6.50 Kmp To 6.80 Kmp (In Stretches) Under Malda Highway Division In The District Of Malda In The Year 2026-2027.
Tender Value
16.31 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
14 days left
EMD
32629
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Maldah → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Paharpur-Swarupganj Road Bituminous Potholes Repairing Work From 0.00 Kmp To 3.50 Kmp, From 3.50 Kmp To 4.70 Kmp, From 6.50 Kmp To 6.80 Kmp (In Stretches) Under Malda Highway Division In The District Of Malda In The Year 2026-2027.
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying Existing Bituminous Surface to a depth of 50mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 50mmand disposal of scarified material within all lifts and lead upto 1000metres (Reference toMoRT&H's specification clause 305.4.3). |
| 2 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density(Ref to MoRT&H specification 404, By Manual Means Grading-2,using Screening Type B |
| 3 | Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(i) For WBM / WMM Surface: (with primer @ 0.85 kg/sqm) |
| 4 | Providing and applying tack coat with Cationic Bitumen Emulsion(RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet(Ref to MORTH's specification clause 503)ii)On Granular surface treated with primer @ 0.25kg-0.30 /sqm. |
| 5 | Repairing Pot-holes with Bituminous Macadam (Grading - II, for compacted thickness of upto 75mm) Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work. |
| 6 | Providing and applying tack coat with Cationic bitumen emulsion(RS1 ) complying with IS:8887 using emulsion pressure distributoron the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure airjet (ReferencetoMORT&H'sspecification clause 503). i)On bituminous surface @ 0.20-0.30 kg /sqm. |
| 7 | Open-Graded Premix Surfacing using Bituminous Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6mm aggregates either using viscosity grade bitumen of approved grade to required line,grade and level to serve as wearing course on a previously prepared base,including mixing in a suitable plant,laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity,finished to required level and grades(Ref to MORT&H's specification clause 510) Case-1: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour |
| 8 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid the the specified levels,grade and cross fall using Type B seal coats(Ref to MORTH's specification clause 511) Case-II: Type B-Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade |
| 9 | Add GST @18 % |
| 10 | Add Labour Welfare Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender