Tender For Addition / Alteration To Omq Under Ge (Af) Srinagar.
Tender Value
43.60 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
18 days left
EMD
87200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition / Alteration To Omq Under Ge (Af) Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R Work) |
| 2 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 3 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 4 | Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed. |
| 5 | S&F pressed steel frame for doors with one rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. |
| 6 | M&L for plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) in bed blocks for hold fast and as in roof kerb benching & similar work etc. complete all as specified and directed. |
| 7 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 8 | Preparation of old steel surface and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed. |
| 9 | S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. |
| 10 | S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 11 | Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 12 | Preparation of old wood and wood based surfaces of any description exc 10cm with or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 13 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. |
| 14 | S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 15 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 16 | S&F 150mm size Aluminium anodised, handle of extruded section, fabricated type, anodised and fixed, complete all as specified and directed. |
| 17 | S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 18 | S&F 125mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 19 | S&F 125mm size Aluminium anodised, handle of extruded section, fabricated type, anodised and fixed, complete all as specified and directed. |
| 20 | S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. |
| 21 | S&F 100mm long floor door stopper of aluminium alloy body and tongue with rubber cover ends, complete all as specified and directed. |
| 22 | S&F aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply and fixing of 5mm thick plain glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. |
| 23 | S&F for powder coated aluminium grill (Thickness or powder coating not less than 50 micron) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, complete all as specified and directed. |
| 24 | S&F aluminium powder coated ventilator (minimum thickness of powder coating 50 micron) having fixed glass with aluminium section having section 50.80mm x 25.40mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick plain glass making frame and glass water tightening making it good etc., complete all as specified and directed. |
| 25 | S&F in repairs 18mm thick prelaminated MDF Board, exterior grade, fixed to timber / steel frame work with screws as in cub board shutter colour and design as approved including all iron mongry such as appropriate no of kobs, handles 75mm long, ball catchers, self closing hinges etc., complete all as specified and directed. |
| 26 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 27 | S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 12mm thick Gypsum Board (water proof) fixed with screw or as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes, finishing with one coat of primer and two coats of oil emulsion distemper over a coat 1mm thick wall care putty including taking down existing ceiling, complete all as specified and directed. |
| 28 | S&F in repairs Pre-painted (in camouflage pattern) galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 29 | S&F in repairs Pre-painted (in camouflage pattern) galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 30 | S&F 300mm mild steel ordinary rat tail pattern springs for door including rollers and roller plate, complete all as specified and directed. |
| 31 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed. |
| 32 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed. |
| 33 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 34 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 35 | S&F in repairs 20mm dia decorative powder coated drapery curtain rods of with bright finish, including decorative side domes, brackets and a minimum of 8 Nos curtain rings in per running metre of length, complete all as specified and directed. |
| 36 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 and including demolition of existing stone slab and tiles, complete all as specified and directed. |
| 37 | M&L for 20-25mm thick machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing / grinding and polishing upto mirror finish complete over and including 20mm thick screed bed in CM 1:6 and including demolition of existing stone slab and tiles, complete all as specified and directed. |
| 38 | M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 10mm thick backing coat in CM 1:4 and including demolition of existing stone slab and tiles, complete all as specified and directed. |
| 39 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 40 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 41 | M&L for Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 42 | M&L for Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed. |
| 43 | M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 44 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 45 | M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. |
| 46 | M&L for brick work with sub class 'B' bricks (using old size bricks) straight or curved on plan to any radius in half brick thick wall radius, built in CM 1:4, complete all as specified and directed. |
| 47 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 48 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 49 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 50 | M&L 5mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 51 | Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 3mm thick wall care putty to obtain smooth / even surface using sand paper and applying two coats of oil bound diameter over a coat of primer, complete all as specified and directed. |
| 52 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 53 | Preparation of newly plastered surfaces of wall sides and soffits of the beams, ceilings, fascia's, parapets etc. and applying two coats of weather paint (Apex) over a coat of exterior primer on, colour and tint as directed in any pattern including scaffolding up to 15m height, complete all as specified and directed. |
| 54 | Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting exc 10cm but not exc 20cm girth, complete all as spcefied and directed |
| 55 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 56 | S&F for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 57 | Refixing old GI pipe 15mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 58 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 59 | S&F for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 60 | Refixing old GI pipe 20mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 61 | M&L for Lagging to 15mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. |
| 62 | M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. |
| 63 | S&F in repairs vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed. |
| 64 | S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed. |
| 65 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 66 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed. |
| 67 | S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.5m fitted in the existing water connection in the toilets, complete all as specified and directed. |
| 68 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. |
| 69 | S&F in repairs toilet paper holder, vitreous China, box type, white, fixed to walls with chromium plated brass screw, complete all as specified and directed. |
| 70 | S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, with capstan handle, screwed down, screwed from iron pipe or for brass ferrule, complete all as specified and directed. |
| 71 | S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed. |
| 72 | S&F in repairs 100mm long hasp and staple, safety type, brass aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and directed. |
| 73 | S&F in repairs hat and coat hooks (Peg set) solid body of aluminium 175mm to 250mm, complete all as specified and directed. |
| 74 | S&F in repairs brass chromium plated tubular towel rail 20mm dia \\"D\\" type 60cm long between flanges, complete all as specified and directed. |
| 75 | S&F in repairs 18-19mm thick block board, grade-2 quality, interior grade, commercial type, fixed with screws to timber framework as in kitchen drawers, cupboard shutters etc. complete all as specified and directed. |
| 76 | S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed. |
| 77 | S&F 30mm width of flaps continuous (piano) hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed. |
| 78 | S&F in repairs Kitchen plate rack made of stainless steel 1mm thick with plugs washers as overall size of 60cm x 75cm including fixing to wall and all accessories, complete all as specified and directed. |
| 79 | M&L for cleaning surface of sunken portion wall / bottom and applying cement slurry @1.2 Kg per Sqm and applying 15mm thick cement plastered in CM 1:3 finished even and fair using extra cement and applying two coats of acrylic polymer modified cementious slurry as per manufactures instruction to make the surface leak proof, complete all as specified and directed. |
| 80 | S&F in repairs 200mm dia towel ring and made out of 8-10mm dia hollow tubes superior quality, complete all as specified and directed. |
| 81 | S&F in repairs for 3 tier corner glass shelf of size 300x300mm (big), 200x200mm (medium) and 150x150mm (small) three set, with chromium plated brackets and railing, complete all as specified and directed. |
| 82 | S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed. |
| 83 | S&F in repairs 100mm / 75mm stainless steel grating, complete all as specified and directed . |
| 84 | S&F in repairs 15mm bore chromium plated wall mixer 3-in-1 system wall mixer with overhead and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower, complete all as specified and directed. |
| 85 | S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 86 | S&F in repairs 15mm bore shower rose cast copper alloy, chromium plated with swivel joints, fancy type with CP neck 9\\" long made to shape, complete all as specified and directed. |
| 87 | S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 88 | S&F in repairs 15mm bore stop valve / angle valve, cast copper alloy, two way, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 89 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball PVC float valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 90 | S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed. |
| 91 | S&F in repairs stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed. |
| 92 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed |
| 93 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed |
| 94 | S&F in repairs 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed. |
| 95 | S&F in repairs 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified. |
| 96 | S&F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 97 | S&F in repairs 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified. |
| 98 | S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 99 | S&F in repairs 110mm bore PVC (SWR) 'P’ trap ,complete all as specified and directed. |
| 100 | S&F in repairs 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 101 | Complete removal of existing treatment of walls and applying 1mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion paint, complete all as specified and directed. |
| 102 | Preparation of old plastered or unplastered ceiling surfaces including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. and applying one coat of white wash, complete all as specified and directed. |
| 103 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 104 | S&F in repairs 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 105 | Complete removal of existing treatment from brick walls or concrete plastered or unplastered surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc. and applying two coats of weather paint (Apex) over a coat of exterior primer, complete all as specified and directed. |
| 106 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 107 | M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in pavement / plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement, complete all as specified and as directed. |
| 108 | M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 109 | M&L for chequered cement concrete tiles size 300 mm x 300 mm x 22-25mm thick with grey cement and pigment , rubber moulded with laquer polish for extra shine, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 110 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 111 | M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. |
| 112 | S&F in repairs sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with 32mm dia waste pipe plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. |
| 113 | S&F 100mm size stainless steel handle, fancy type, complete all as specified and directed. |
| 114 | S&F 60mm size stainless steel hinge, self closing, Italian pattern suitable for wooden cabinet door opening / closing operation, complete all as specified and directed. |
| 115 | M&L for 3/4mm thick PVC edge lipping fixed with nails for 18/19 mm thick prelaminated particle board & shutters etc., complete all as specified and directed. |
| 116 | S&F of Magnet of suitable size fixed for cabin leafs, drawers etc., complete all as specified and directed. |
| 117 | S&F stainless steel telescopic channels roller of size 25mm x 12mm, 450mm length (when close) with male female rolling brackets suitable for baskets, complete all as specified and directed. |
| 118 | S&F Stainless steel 304 grade perforated cutlery basket of size 520mm width, 485mm depth and 100mm height, complete all as specified and directed. |
| 119 | S&F Stainless steel 304 grade Cup & Saucer basket of size 520mm width, 485mm depth and 100mm height, complete all as specified and directed. |
| 120 | S&F Stainless steel 304 grade designer Pull out detergent basket of size 100mm width, 485mm depth and 430mm height, complete all as specified and directed. |
| 121 | S&F Stainless steel 304 grade designer plate basket of size 520mm width, 485mm depth and 150mm height, complete all as specified and directed. |
| 122 | S&F Stainless steel 304 grade designer pull out basket of size 810mm width, 485mm depth and 200mm height, complete all as specified and directed. |
| 123 | S&F Stainless steel 304 grade designer Gas removal mesh of size 200mm width and 100mm height, complete all as specified and directed. |
| 124 | M&L for second class hardwood plain fillets, square in section, clean sawn, secured with screws exc 13 Sqcm but n exc 25 Sqcm, complete all as specified and as directed. |
| 125 | Schedule 'A' Part-II (E/M Work) |
| 126 | Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing, complete all as specified and directed. |
| 127 | M&L for Point wiring for light / fan point controlled by one way switch 6 Amps 240 volts with 1.5 sqmm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed copper wire 1100 volt grade in and including concealed / surface, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 1.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) |
| 128 | All as per Ser item No 125.00 here in above but light / fan point controlled by two way switch 6 amps 240 volts |
| 129 | All as per Ser item No 125.00 here in above but bell point controlled by one bell push switch 6 amps 240 volts |
| 130 | All as per Ser item No 125.00 here in above but 3 pin 6 Amps switch socket outlet point on independent Board. |
| 131 | All as per Ser item No 125.00 here in above but 3 pin 6 Amps switch socket outlet point on same board. |
| 132 | M&L for Point wiring with 2.5 sqmm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed copper wire 1100 volt grade in and including concealed / surface, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 2.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) |
| 133 | S&F Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed. |
| 134 | S&F Modular switch 2 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed. |
| 135 | S&F modular Socket 6 Amp, 230 volts, 5 Pin universal, 2 Module, complete all as specified and directed. |
| 136 | S&F Modular switch 1 way, 16 Amp, 240 volts ,1 Module, complete all as specified and directed. |
| 137 | S&F Modular socket 6/16 Amp (euro socket), 250 volts, 2 Module, complete all as specified and directed. |
| 138 | S&F modular bell push switch with indicator 6 Amp 240 volte, 1 Module, complete all as specified and directed. |
| 139 | S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed. |
| 140 | S&F bell electric AC,230V, single phase ,ding dong type, complete all as specified and directed |
| 141 | S&F modular step type fan regulator suitable for 120 watt 250 volts, 2 Module, complete all as specified and directed. |
| 142 | S&F decorative box type fitting with blue colour end cap for LED tube 20 watt luminaire for 230 volt AC including LED tube 20 watt, complete all as specified and directed. |
| 143 | S&F in repairs 45 watt LED building secuirity light, IP-66 high power with pressure die cast aluminium housing complete with all accessories including 3 core flexible cable from ceiling rose to connector of fitting etc., complete as specified and directed. |
| 144 | S&F energy saving new generation 10 watt LED IP 65 bulkhead luminaire with opal diffuser with 10 watt LED lamp etc., complete as specified and directed. |
| 145 | S&F 10 watt sleek LED mirror light provided with high output diffuser with suitable capacity driver with all comptonants as per manufacturer etc., complete as specified and directed. |
| 146 | S&F lamp holder suitable for pin type LED 10 watt including lamp etc., complete as specified and directed. |
| 147 | Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make /type /size (horizontal / vertical) lowering and setting aside opening geysers examining and checking thoroughly for requisite repair / replacement of defective /worn-out / unserviceable components / parts materials including preparing inventory for each geyser separately in presence of Engineer-in-Charge and removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements by HCL or aqua clear pedilite solution, thermostat, indicator lamp, assemble checking electrical connection, stopping of minor leaking by soldering/brazing of the inner copper tank and replacement of defective worn out unserviceable components/parts and painting of geyser 50 ltrs after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting mation to achieve glossy finish of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high ) and re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge |
| 148 | including the replacement of the following items etc., complete all as specified & directed.(a) Supply only Fiber reinforced PVC nylon pipe heavy duty size 450 mm long 15mm bore with brass coupling chromium plated with rubber washers as both ends as per IS.-01 Nos(b) Supply only Flexible chromium plated connection pipe size 450 mm long 15 mm bore with brass chromium plates coupling suitable for geyser any capacity-01 Nos |
| 149 | S&F 25 Litre capacity electric water heater (geyser), storage type steel body with copper inner tank and heating element upto 2KW, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV,connection piece etc., complete all as specified and directed. |
| 150 | Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts in its original location and hanging connecting and testing ceiling fan for smooth functioning including replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose, and painting with one coat of synthetic enamel paint with spray painting machine & marking MES No. with black paint, complete all as specified and directed. |
| 151 | S&F in repairs 300mm sweep heavy duty exhuast fan, 900 RPM turbo force model single phase including all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc., complete as specified and directed. |
| 152 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories 230V, 1200 mm sweep, minimum air delievery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC), complete all as specified and directed. |
| 153 | S&F epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made, (double door) 8 way single pole & neutral suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed. |
| 154 | S&F epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made, (double door) 4 way VTPN suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed |
| 155 | S&F MCB of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'C' curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 156 | S&F MCB single pole ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc all as specified and directed. |
| 157 | S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc all as specified and directed. |
| 158 | S&F 160 Amps MCCB, 3 pole 16 KA working on 415 Volts 50 HZ AC supply, complete all as specified and directed. |
| 159 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. |
| 160 | M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm gradedcrushed stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe including taking down old one, complete all as specified and directed. Note: (i) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter. (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. |
| 161 | Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, size of cable 25 Sqmm 4 core, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc, to suitable the cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc. including taking out unserviceable cable, complete all as speccified and directed. |
| 162 | Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil etc all as specified and directed |
| 163 | Returing, filling in incl spreading, levelling, watering and well ramming in layers n exc 25cm thick after laying of the cables,jointing & testing complete all as specified and directed. |
| 164 | Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n. exc 1.50 m above the starting point complete as specified and directed. |
| 165 | M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc., complete all as specified and directed. |
| 166 | M&L for laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks, complete all as specified and directed |
| 167 | S&F 40mm dia galvanised steel tube, light grade, for protection of copper strip / cable at wall and duct / road / trench, complete all as specified and directed. |
| 168 | Deduction to be made from BOQ for Schedule 'A' Part-III (Credit Schedule from dismantling / taking down items) worth Rs 1,19,395.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender