Tender For Beautification Work Of Kodhiya Pond Near Village Bharjan In Modinagar.
Tender Value
81.01 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
18 days left
EMD
1.62 Lakhs
Bank guarantee accepted
Document Fee
4779
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Work Of Kodhiya Pond Near Village Bharjan In Modinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto cms.measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared.SOR2022/259 |
| 2 | Disposal of Malba, Garbage seild found in deselting of Nala up to 3 Km including loading unloading etc all completed as per direction E/SOR 2022 |
| 3 | Earth work in excavated by mechenical means (hydraulic excavator)/ manual means in foudation trenches or drains (not exceeding 1.5 m in width of 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil Item no-2.8.1 DSR 2023. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:4:8 (1 cement: 4 coarse sand (Zone-III) derived from natural sources 8 graded stone aggregate 40 mm nominal size derived from natural sources) item no-4.1.8 DSR 2023 |
| 5 | Brick work with common burnt classF.P.S.(nonmodular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sandDSR/2023 6.1.1 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand) DSR2023 6.4.1 |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.(1 cement :4 coarse sand Dsr2023/4.13.2+6.4.1 |
| 8 | Cement Concrete 2cm. gauge approved stone ballast coarse sand and cement in proportion 4:2:1 including supply of all materials, labour, T&P etc. required for proper completion of the work Cement mortar 1:4 (DSR2023 4.1.3). |
| 9 | 12MM Cement Plaster of mix 1:4 cement andC/Sand DSR2023 13.4.1 |
| 10 | 40 mm thick (red sand stone) rubbed stone flooring over 20 mm (average) thick base ofcement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, sidebuttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed withpigment to match the shade of stone and pointing with same mortar. DSR/2023 11.30.1 |
| 11 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note:-Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix payable/recoverable separately). DSR 2023/5.33.1.1 UP TO PLINTH LEVEL All works upto plinth level DSR 5.33.1/2023 |
| 12 | M.S. steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. mild steel and medium tensile steel bars. Item no-5.22.1 DSR 2023 |
| 13 | Mild steel or iron work in heavy sizes such as trusses; built up gates, door, frames, record racks roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts etc. & its fixing required for proper completion of the work 55kg/sqm. SOR 2022/503 |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.DSR2023/11.38 |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 2023/13.80 |
| 16 | Panting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work DSR 2023/13.62.1 |
| 17 | Finishing walls eith Premium Acrylic smooth exterior paint with silicone additives of required shade. New work (Two or more coat applied @ 1.67 sqm over and including priming coat of exterior printer applied @ 0.90 litre/10 sqm. ( DSR 2023/13.46.1) |
| 18 | Construction of Granular Sub-Base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixsing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the CUM desired density, as per MORTH specification clause No. 401 complete in all respects. |
| 19 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and SQM including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per direction of Engineer-in- charge DSR2023/16.68 |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot restsDSR2023/17.1 |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:DSR2023/17.7.1 |
| 22 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.DSR/2023/17.80 |
| 23 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.(FOR FIMIAL) DSR2023/17.23 |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 15 mm nominal dia Pipes DSR2023/18.7.1 |
| 25 | Same as above in item no23 but for 20 mm nominal dia Pipes 18.7.2 |
| 26 | Same as above in item no23 but for 25 mm nominal dia Pipes 18.7.3 |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR2023/18.48 |
| 28 | Providing and fixing brass stop cock of approved quality : 15 mm nominal boreDSR2023/18.16.1 |
| 29 | Providing and fixing brass bib cock of approved quality :.1 15 mm nominal borDSR2023/18.15 |
| 30 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore (DSR 2023/18.17.1) |
| 31 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore (DSR 2023/18.17.1A) |
| 32 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.FOR T&Z SECTION FOR35KG/SQM (DSR 2023/10.25.1) |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (DSR 2023/18.9)80 mm nominal dia pipes (DSR 2023/18.9.8) |
| 34 | 100 mm nominal dia pipes (DSR 2023/18.9.9) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender