Tender For Supply And Fitting, Fixing Of Sluice Valves, Non Return Valves, With Some Piping Works And Some Other Allied Electrical Works Under A.S.T.A. Water Supply Scheme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
14 days left
EMD
8000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Fitting, Fixing Of Sluice Valves, Non Return Valves, With Some Piping Works And Some Other Allied Electrical Works Under A.S.T.A. Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of following materials at site:- |
| 2 | 3½ Core X 50 Sqmm 1.1 KV Grade Al. Ar. XLPE insulated cable as per IS:7098(Part-I).(From Panel To SFU)(Make:-Gloster/Mescab/Approved make) |
| 3 | 125 mm dia, PN-1.0 Cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS:14846 having body door and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 Cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm(seat test) and body tested to 15 kg/sqcm.All the valves should be tested by closed end method only.(Delivey side of Submersible Pump)(Make:-Approved Make) |
| 4 | 125 mm dia, PN-1.0 Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & hinge pin of st.st.AISI 410, valve suitable for a maximum working pressure of 10 kg/cm2 (Seat test) & body tested to 15 kg/Sqcm.(Delivey side of Submersible Pump)(Make:-Approved Make) |
| 5 | 125 mm dia MS Black Pipe as per confirming to IS:1239 PART-1 (2004) heavy duty Class-C. |
| 6 | 125 mm dia Heavy duty bend as per IS:2062. |
| 7 | 125 mm dia M.S. nipple 300 mm long both end threaded as per IS:2062. |
| 8 | 125 mm dia Slip on Flange as per IS:2062. |
| 9 | 200 mm dia Heavy duty bend as per IS:2062. |
| 10 | 200 mm dia MS Black Pipe to IS:3589 Gr.330 with 9.5 mm thick. |
| 11 | 200 mm dia Slip on Flange as per IS:2062. |
| 12 | 200 mm dia Blank Flange as per IS:2062. |
| 13 | 150 mm dia Glycerine filled Diaphragm Seal type Gagues with syphon tube and three way cock, Pressure Gauges range 0-15 kg/ cm2. (Make:-H.Guru/Other approved make) |
| 14 | 125 mm MS Suspension clamp constructed by 150 mm X 16 mm thick strip 4 feet long. |
| 15 | 1.5 Sqmm Flame retardant low smoke PVC insulated (Unsheathed) industrial single core multi strand cable with electrolytic grade annealed copper conductor suitable upto 1100 Volts gradeconforming to IS:694.(Make:-Approved Make) |
| 16 | 100 Amp 4 way copper busbar chamber Box by 16 SWG Sheet steel enclouser including porcelin chair etc, busbar made of ETP Grade Copper with painting complete as per direction of EIC. |
| 17 | Single Phase Under & Over Current Relay (0.25 A / 0.5 A) & 1/5 amp. (VariableUC/OC) (Auto / Manual Reset) Power ON delay & Trip Time Delay 1-10 Sec./2CO.(Make:-Minilec, Model No-S2 CMR 5(0) |
| 18 | Resin cast 100/5 A CT, Class-1.0, 5 VA.(Make:-Rishabh, Model No-XRC1(80/30/50). |
| 19 | Current Sensor din rail mounted (up to 3.00 H.P.)(5 Amp.)(Make:-Minilec, Model No-S2 CTS 1/5) |
| 20 | 100 Amp, 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating on angle iron frame.(Make:- L & K, Type No-FN 100 TPN, Cat No-SK90485, Fuse cat no-SF94942/Other approved make) |
| 21 | Installation of all items as mentioned in Sl.No. 1.01 to 1.19 No, including fitting, fixing of busbar, laying of cable, functioning with water level monitoing realy, making pipe line arrangement, valves, flanges with necessary welding & erection job etc interconnection with rising main, painting with original coloured brand approved by EIC, all complete as per relevent IE Rules, and upto entire satisfaction of EIC. |
| 22 | Add GST @ 18% |
| 23 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender