Tender For Lowering Of Submersible Pumping Machineries In Newly Sunk Rbtw No-07 For Cwr At New Churulia Head Works And Some Other Allied Works Under New Churulia Water Supply Scheme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
15 days left
EMD
2700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lowering Of Submersible Pumping Machineries In Newly Sunk Rbtw No-07 For Cwr At New Churulia Head Works And Some Other Allied Works Under New Churulia Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of following materials at Site:- |
| 2 | Vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: Capacity 28 m3/Hr. at a head of 38 mtrs.,Motor submersible type-3.75KW/5 HP 3 phase 50 Hz±3%,415 Volt ± 6%, 2900 RPM as per Technical Specification given. (DOL) (Test certificate and guarantee certificate is to be submitted at the time of delivery) |
| 3 | 3 Core X 4 Sqmm 1.1 KV Grade flat submersible copper conductor cable.(Make:-Gloster/other approved make) |
| 4 | 80 mm dia. ERW M.S. column pipe having thickness 4.85 mm,(as per IS 1239 Part-I Heavy Type) having 11 TPI thread at both end with one heavy type socket and painted by 2 coats of anticorrosive synthetic paint.(Each pipe 1.5 mtr long)(Make:-Bansal/Jindal/Prakash/Other approved) |
| 5 | G.I. wire for cable binding. |
| 6 | Earth work in excavation of Cable line trenches, in all sorts of soil including removing, spreading or stacking the spoils within a lead of 75 m. as directed &filling the same with excaveted soil including ramming dressing after all complete. The item includes necessary trimming the sides of trenches,levelling, dressing and ramming the bottom, bailing out water as required complete.(200 Mtr. Cable x 0.5 Mtr. X 0.3 Mtr)(a) Depth of excavation not exceeding 1,500 mm. |
| 7 | Laying 3 Core X 10 Sqmm through existing soil trench.(Cable supplied departmentally) |
| 8 | Laying of 3 Core X 10 Sqmm Al. Ar. Cable along the length of G.I. collecting line including fixing with supplied G.I. wire at a suitable interval so as to prevent sagging of cable complete as per direction of EIC.(For G.I. Collecting line Portion)(Cable supplied departmentally |
| 9 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation |
| 10 | Making straight through joint between 1.5 mm2 or 2.5 mm2(motor cable) and 3 core X 4mm2 submersible flat copper cable for extension of motor cable up to required lengh by supplying necessary seal kit to make joints leak proof all complete as per direction.(For One number RBTW) |
| 11 | Installation of 7.5 HP submersible pumping machinery along with 80 mm dia. M.S. column pipe part by part in the newly sunk tube wells with an arrangement of derrick, lifting tackles, tools and plants etc. on hire basis and binding the vertical submersible cable with the column pipes properly and fixing M.S. Top Cover on the tube wells with supplying necessary Clamps, nuts, bolts, washers etc. all complete as per direction. |
| 12 | Making straight through joint of 3 Core 10 mm² Al Ar cable with 3 Core x 4 Sqmm submersible flat cable by supplying Ferrul, rubber and other necessary materials to make the joint leak proof.(Without kit) |
| 13 | Finishing the end of 3 Core X 10 Sqmm XLPE armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. |
| 14 | Supply of 500 mm sweep, electric pedestral fan 230 VAC, 50 Hz. (Make:-Approved make) |
| 15 | Supply of molded chair.(Make:-Approved make) |
| 16 | Add GST @ 18% |
| 17 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender