Tender For Rectification Of Lt Pdb Cum Mcc Starter Panel, Supply & Installation Of 30 Kw/40 Hp Centrifugal Pump-Motor Set For Mangalpur Zone At Searsole Boosting Station Under Rcfa Part-Ii Water Supply Scheme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
14 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rectification Of Lt Pdb Cum Mcc Starter Panel, Supply & Installation Of 30 Kw/40 Hp Centrifugal Pump-Motor Set For Mangalpur Zone At Searsole Boosting Station Under Rcfa Part-Ii Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | LT PDB Cum MCC Panel repairing portion:- |
| 2 | Single phase ammeter, size-96 mm X 96 mm X 40 mm, C.L.-1.0, accuracy 0.5 % on full scale for Volt & Amps and 0.2 % for frequency, easy to operate:- Intuitive navigation with single button for self-guided menus, panel key: Single key for programming, navigation or as selector switch, LED display: 7 segment numeric LEDs of height ~14.2 mm (0.55 in) with 4 digits display in one row with kilo value indicator, bright LED indicators - Kilo & Phase indications for measured value, compact meter with 43.5 mm depth behind the panel.(Make:- Schneider, Model No-DM1110) |
| 3 | Single phase Voltmeter CI1.0, 96 mm X 96 mm X 40 mm accuracy 0.5 % on full scale for Volt & Amps and 0.2 % for Frequency.Easy to operate: Intuitive navigation with single button for self-guided menus.Panel key: Single key for programming, navigation or as selector switch.LED display: 7 segment numeric LEDs of height ~14.2 mm (0.55 in) with 4 digits display in one row with kilo value indicator.Bright LED indicators - Kilo & Phase indications for measured value.Compact meter with 43.5 mm depth behind the panel.(Make:- Schneider, Model No-DM1210) |
| 4 | On-delay timer, 5 sec-100 sec, 200-240 V AC, 50 Hz.(Make:-Siemens, Type No-3RP1513-1AP308K) |
| 5 | 50 kVAR contactor for capacitor built with auxiliary relay 2NO+2NC, 3 Phase, 415 VAC, 50 Hz.(Make:-Siemens, Type No-3TS1722-0A..5-8K) |
| 6 | At first remove the damaged capacitor power contactor, delat timer, etc from the existing panel after disconnection of all power line.Then fixing the above supplied materials at same place, then making power & control circuit wiring through out the panel work must be done by Experienced electrician and wholly satisfaction of EIC. |
| 7 | 40 HP Centrifugal Pump replacement portion:- |
| 8 | Supply, Delivery and storage at site of horizontal Split casing Centrifugal Pumping Machinery with Channel Base Frame, Couplings, Coupling Guards, Companion Flanges, foundation bolt etc. of pump set with Horizontal foot Mounted Induction Motor for the pump duty with adequate margin as per direction of EIC.M.O.C:-a) Volute Casing-C.I. FG-260b) Impeller-LTB-2c) Shaft-SS:410d) Shaft Sleeves-SS:410e) Neck Ring/Wear Ring-LTB-5(H-Q-P Curve of Pumps has to be submitted during the delivery)(Make:-KBL/Wilo+Mather & Platt/Flowmore/Other approved make)Motor specifications:-a) Power Rating:-30 KW/40 HPb) Efficiency:-As per IE-4c)Specific Space heater at terminal box of motord)Operating Temp:- 50°Ce)Cooling arrangement-TEFC.(Make:- CGL/Marathon/Other Approved make) |
| 9 | Discharge-136 M³/Hour. Head-40 Mtr. |
| 10 | 250 mm X 125 mm eccentric reducer as per IS:2062. |
| 11 | 100 mm X 200 mm concentric enlarger as per IS:2062. |
| 12 | 250 mm dia MS slip on flange as per IS:1538. |
| 13 | 200 mm dia MS slip on flange as per IS:1538. |
| 14 | 150 mm dia Glycerine filled Diaphragm Seal type Gagues with syphon tube and three way cock, Pressure Gauges (0-16 kg/ cm2).(Make:-H.Guru/Feibig/Other approved make) |
| 15 | 250 mm dia, P.N.-1.0, cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS:14846having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm (seat test) and body tested to 15 kg/sqcm. All the valves should be tested by closed end method only.(Make:-IVI/Jupiter/Other approved make) |
| 16 | Installation Testing & Commissioning of above supplied pump-motor Set after dismantling the existing base foundation of pumping machineries with base plate, groutings, eye bolts etc including electrical connection, installation of centrifugal pump-Motor set, after making new RCC foundation, placing of eye bolts, including laying of existing LT cables, socketting and glanding of cables (with necessary jointing materials), doing necessary earthing arrangements of motor, painting of suction & delivery pipe line, for completion of work as per relevent Hydraulic Standards & IE rules in compliance with specification given in NIT. |
| 17 | Add GST @ 18% |
| 18 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender