Tender For Augmentation Of Existing Wornout Pipes/Placement Of Water Supply In Various Places Of Master Plan Areas (Under District Capex)
Tender Value
12.12 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
24240
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Existing Wornout Pipes/Placement Of Water Supply In Various Places Of Master Plan Areas (Under District Capex)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Bituminous road. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soils. |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed 1 meter from cutting edge: All kinds of soils. |
| 4 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. I. 80 mm dia nominal bore |
| 5 | II. 65 mm dia nominal bore |
| 6 | II. 50 mm dia nominal bore |
| 7 | II. 40 mm dia nominal bore |
| 8 | V. 25 mm dia nominal bore |
| 9 | VI. 20 mm dia nominal bore |
| 10 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) I. 80 mm dia. nominal bore |
| 11 | II. 65 mm dia. nominal bore |
| 12 | III. 50 mm dia. nominal bore |
| 13 | IV. 40 mm dia. nominal bore |
| 14 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. Completei. 25 to 40 mm nominal bore |
| 15 | ii. 50 to 80mm nominal bore. |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. |
| 17 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: I. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Providing / Fabricating/ Fixing of MS fitting viz Bends, Tees, Double Collars, Tail Pieces, MS Connection Clips of suitable degrees to be fabricated from 6mm / 8mm thick MS plate as per the requirement of site. This also includes welding charges, cutting, threading etc. The work should be leak proof. This item also including lead caulking, Red Oxide Primer coats, cost of spurn yarn. |
| 19 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) I. 80 mm nominal bore |
| 20 | II. 65 mm nominal bore |
| 21 | III. 50 mm nominal bore |
| 22 | IV. 40 mm nominal bore |
| 23 | V. 25 mm nominal bore |
| 24 | VI. 20 mm nominal bore |
| 25 | Hire charges of welder including gen set for welding of pipes, including cost of fuel, electrodes and all sorts of carriages to and fro also including manpower complete job. |
| 26 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. I. For thickness of tiles above 25 mm and upto 40 mm. |
| 27 | Fixing glazed/Ceramic/Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, in average 3mm thickness. |
| 28 | Providing and fixing of Regulatory Valve of reputed make including all fitting and pipe specials Complete Job.I. 40mm Regulatory Valve |
| 29 | II. 25mm Regulatory Valve |
| 30 | III. 50mm Regulatory Valve |
| 31 | Carriage of material from different sources to actual site of work by mechanical transport.i. Sand for an avg. Lead of 20Kms. |
| 32 | ii. Cement for an avg. Lead of 20Kms. |
| 33 | iii. 40mm aggregate for an avg. Lead 20Kms |
| 34 | Carriage of pipes from Divisional Store to actual source of site of work by mechanical transport:I. Average lead of 18Kms. |
| 35 | II. Average lead of 40Kms. |
| 36 | Providing and fitting of pipe sepcials of reputed make (ISI Marked). The item includes all types of labour, carriages, tools and tackles required for the job.a. Reduceri. 80mm x 65mm |
| 37 | ii. 65mm x 50mm |
| 38 | iii. 50mm x 40mm |
| 39 | iv. 40mm x 25mm |
| 40 | b. Elbowi. 80mm dia |
| 41 | ii. 65mm dia |
| 42 | iii. 50mm dia |
| 43 | iv. 40mm dia |
| 44 | v. 25mm dia |
| 45 | vi. 20mm dia |
| 46 | Teei. 80mm dia |
| 47 | ii. 65mm dia |
| 48 | iii. 50mm dia |
| 49 | iv. 40mm dia |
| 50 | v. 25mm dia |
| 51 | vi. 20mm dia |
| 52 | d. Nipplei. 25mm dia ( 6 inch length) |
| 53 | ii. 20mm dia (6 inch length) |
| 54 | e. Unioni. 40mm dia GI |
| 55 | ii. 25mm dia GI |
| 56 | iii. 20mm dia GI Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender