Tender For B.O.Q For Balance Electrical Works Of Mushroom Specialist Laboratory At Lalmandi Srinagar 2026-27
Tender Value
8.23 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
16461
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for B.O.Q For Balance Electrical Works Of Mushroom Specialist Laboratory At Lalmandi Srinagar 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | ( 1st floor panel) Supplying,Installation,Testing and Commissioning of Cubical Type Indoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Building Distribution Panel ) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.with latest ammendment IS61439.Refer SLD . |
| 2 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 3 | Normal INCOMING: |
| 4 | a)160A 4P MCCB 25 KAincluding spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. |
| 5 | b) 4 No. of Aluminium Bus Bar of 250 Amp. |
| 6 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 7 | a)100 A 4P MCCB 25 KA Legrand/ Shinider/ Eq. standard make. |
| 8 | b) 4 No. of Aluminium Bus Bar of 200 Amp. |
| 9 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 10 | OUTGOING: |
| 11 | F.P 40A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 12 | F.P 63A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 13 | D.P 63 A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 14 | c) space for 12 way MCB's |
| 15 | ( 2nd floor panel) Supplying,Installation,Testing and Commissioning of Cubical Type Indoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Building Distribution Panel ) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.with latest ammendment IS61439.Refer SLD . |
| 16 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 17 | Normal INCOMING: |
| 18 | a)160A 4P MCCB 25 KAincluding spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. |
| 19 | b) 4 No. of Aluminium Bus Bar of 250 Amp. |
| 20 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 21 | a)100 A 4P MCCB 25 KA Legrand/ Shinider/ Eq. standard make. |
| 22 | b) 4 No. of Aluminium Bus Bar of 200 Amp. |
| 23 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 24 | OUTGOING: |
| 25 | F.P 40A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 26 | F.P 63A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 27 | D.P 63 A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 28 | c) space for 12 way MCB's |
| 29 | ( Main Distribution panel) Supplying,Installation,Testing and Commissioning of Cubical Type Indoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Building Distribution Panel ) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.with latest ammendment IS61439.Refer SLD . |
| 30 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 31 | Normal INCOMING: |
| 32 | b)250 amp TPN MCCB 35 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. |
| 33 | b) 4 No. of Aluminium Bus Bar of 400 Amp. |
| 34 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 35 | d) onload Change over switch 200 Amp for generator.Front operated. |
| 36 | e) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 37 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 38 | INVERTER INCOMING: |
| 39 | a)100 amp DP MCCB 10 K Legrand/ Shinider/ Eq. standard make. |
| 40 | b) 2 No. of Aluminium Bus Bar of 160 Amp. |
| 41 | OUTGOING: |
| 42 | a)100A 4P MCCB 25 KA including spreader links, ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/L&T/ABB make. |
| 43 | a)160A 4P MCCB 25 KAincluding spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. |
| 44 | F.P 40A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 45 | F.P 63A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 46 | D.P 63 A 10 Ka \\"C\\" Curve MCB Legrand/ Shinider/Semiens/ABB make. |
| 47 | c) space for 12 way MCB's |
| 48 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ), single core cable in surface/ recessed medium class PVC conduit as required. |
| 49 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 50 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 51 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 52 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 53 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 54 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 55 | 25 mm |
| 56 | 32 mm |
| 57 | S/L , testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 58 | a)95 sq.mm 3.5 core |
| 59 | a)25 sq.mm 4 core |
| 60 | a)35 sq.mm 4 core |
| 61 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) including bends, Tees, cross members and allied accessories with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 62 | 200 mm width X 50 mm depth X 1.6 mm thickness Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender