Tender For Development Of Pedatric Deptt At Mch Building At Mgims/Khs, Sevagram.
Tender Value
590
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
31000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Pedatric Deptt At Mch Building At Mgims/Khs, Sevagram.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 2 | RemovingwoodenorA.C.partitionincludingframeworkandstack-ingthematerialsaswith all leads, lifts etc. complete. |
| 3 | Removing cement tiles, or marble or polished shahabad floor or situ cement plaster/conrete or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 4 | Removing doors and windows/ with frames/ Wardrobe without frame/grill/pannels and stacking the materials as directed with all leads, lifts etc. complete. |
| 5 | Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules .including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing internal cement plaster 12mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. |
| 10 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square In Rs.Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 11 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite |
| 12 | Providing and laying ceramic tiles having size 30cm.x 60cm. confirming to corresponding I.S. for dado and skirting (use only Kajariya/Nitco/RAK) in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour epoxy cleaning curing etc. complete. (Tiles should be pasted using chemical Adhesive only and a spacer of 3mm around all four corners of the tiles should be provided.) |
| 13 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 14 | Providing and laying vitrified matt finish full body tiles having size 590 mm to 605mm to 605mm of 8to10mm thickness and confirming IS.15622-2006 (GroupBla) of approved make (Kajariya/Nitco/RAK), shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints with white/ colour epoxy, curing and cleaning etc. complete.(Tiles should be pasted using a spacer of 3mm around all four corners of the tiles should be provided.) |
| 15 | Providing and laying vitrified matt finish full body tiles having size 590 mm to 605mm to 605mm of 8to10mm thickness and confirming IS.15622-2006 (GroupBla) of approved make (Kajariya/Nitco/RAK), shade and pattern for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour epoxy cleaning curing etc. complete. (Tiles should be pasted using chemical Adhesive only and a spacer of 3mm around all four corners of the tiles should be provided.) |
| 16 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximumcenter to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed toreinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, labour, material, lifts etc. all complete. |
| 17 | Providing and fixing in position (as per1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram /Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933Kilogram/Running metre.The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. Inter locking section 40 x 18 x 1.10mm at weight 0.469 Kilogram / Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and selflocking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising, without box |
| 18 | Providing and fixing in position (as per I.S. 1868/1982) Aluminium openable window of single panel of any size as per detailed drawings and as directed by Engineer-in-Charge, with all necessary aluminium sections including frame and shutter sections, necessary fixtures and fastenings, hinges/friction stays, aluminium handle with locking arrangement, tower bolt/locking catch, cleats, brackets, screws, nuts, bolts, rivets, glazing beads/gaskets and all other required fittings, including 5 mm thick clear float glass, complete in all respects. The aluminium sections shall be of approved make and suitable size, properly fabricated and assembled, with total aluminium section weight considered at 6.90 kg per square metre of window area, including frame, shutter and necessary aluminium sections. The window shall be properly fixed to the wall/opening with necessary aluminium/M.S. holdfasts, screws and fasteners, including cutting, drilling, fabrication, assembling, glazing, fixing and making good all joints, complete as per detailed drawing and as directed by the Engineer-in-Charge. (with colour anodised) |
| 19 | Providing and fixing in position colour anodised coated aluminium louvered windows /ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete |
| 20 | Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality,colour and shade to newsurface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). (Makes Asian/ Berger) (Ceiling Colour also included) |
| 21 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. (Make Kolher) |
| 22 | Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Make Kolher) |
| 23 | Providing & fixing 10 cm rigid PVC Nahani trap including PVC gratiny bend etc. |
| 24 | Providing & laying in trenches 20 mm dice CPVC pipe including necessary excavation, Fittings retilling trenches etc. (Make Supereme) |
| 25 | Providing & fixing 75 mm dia stablishes pipe/PVC soil vent / waste pipe & with necessary fixtures & fitting etc. (Make Supereme) |
| 26 | Providing & fixing 100 mm dia stablishes pipe/PVC soil vent / waste pipe & with necessary fixtures & fitting etc. (Make Supereme) |
| 27 | Providing & fixing stainless steel sink size 460 x 460 x 230 mm 1mm Thick etc. (Make Nirali) |
| 28 | Providing & fixing CP two way bib were of approved make continental including necessary socket/union etc (Make Kolher) |
| 29 | Providing & fixing hand shower ( health funcet ) with 8mm dia 1 mm flong flexible tube etc. (Make Kolher) |
| 30 | Providing & fixing 450 mm x 550 mm size supersils type Belgium mirror with 16 mm dia Nickel plate towel rod etc…(Make Saint Gobian/ Modi Guard) |
| 31 | Providing and fixing wardrobe shutters made from 18 mm thick ISI marked BWP/BWR grade plywood conforming to relevant IS standards, finished on both sides with 1.0 mm thick decorative laminate (Formica) of approved shade and make, bonded using approved synthetic resin adhesive under proper pressure. The shutter edges shall be finished with 2 mm thick matching PVC edge banding fixed with hot-melt adhesive and machine finished. The shutter shall be fixed to the existing or new wardrobe frame using heavy-duty stainless steel butt hinges (minimum 3 Nos. per shutter), along with approved quality SS screws, magnetic catch, and suitable stainless steel handles (150–200 mm) complete. The frame shall be made of approved quality hardwood/steam beech wood section of size 75 mm × 50 mm (or as per site requirement), properly seasoned, treated against termites, and fixed in position with suitable fasteners. The work shall include all necessary cutting, fitting, alignment, hardware, polishing of exposed wooden surfaces (where applicable), touch-up, and all labour, materials, tools, tackles, and incidental charges required for complete installation as directed by the Engineer-in-Charge. |
| 32 | Providing and fixing pine wood flush door shutter in single leaf/double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved Laminate 1 mm thick on both face so as directed, all necessary beads, mouldings and lipping, rought iron hold fasts, chromium plated fixtures and fastenings, with S.S Hinges, Tower bolt, latches, Aldrop, handle and door stopper, chromium plated handles on both sides, and finishing etc. complete as directed by the Engineer-in-Charge. |
| 33 | Providing and fixing factory-made solid Waterproof Wood Plastic Composite (WPC) Door Shutter of approved make for bathrooms/toilets, 25 mm thick and of approved size (generally 750 mm × 2100 mm or as per site requirement), manufactured from high-density WPC material, 100% waterproof, termite proof, borer proof, fungus resistant, moisture resistant, corrosion resistant, warp-free and suitable for wet areas, with smooth factory-finished surface of approved colour and texture, fixed to the existing/new frame with 3 Nos. stainless steel (SS-304) ball bearing hinges (100 mm), SS-304 tower bolt (150 mm), SS-304 D-type handles (150 mm pair), door stopper, all necessary stainless steel screws, fasteners and fixtures, including cutting, trimming, fitting, making necessary adjustments for proper alignment and smooth operation, complete in all respects as directed by the Engineer-in-Charge. |
| 34 | Providng and fixing in position colour anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete |
| 35 | Providing and fixing in position, single shuttered aluminium extruded colour anodised openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogram capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete. |
| 36 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc.as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete. |
| 37 | Providing and constructing Brick Masonry Inspection Chamber 60cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed incement concrete with R.C.C.Cover medium duty 140Kilogram with frame etc complete. |
| 38 | Providing and laying cement concrete flooring 50mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cmx30cm or other size laid diagonally/square etc finishing smooth (with extra cement)in any colour as directed and curing etc. complete. With Crushed Sand. |
| 39 | Removing existing materials from the slab surface cleaning with wire brush. Providing inject able pressure grouting with Arm grout powder (MYK) at visible seepage area and then applying two coats of polymer coating with fibre mesh chemicals used Dr.Fixit, URP or PidiliteRoff Bond repair or MYK multicreate or Fascroc Hydra proof. Providing guarantee of treatment up to 7 years. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender