Tender For Shifting Of Existing 900Mm Dia. Di Pipe Line Along Nh 16 From Kalibala To Pukudibandha Jn. In Connection With Puintola To Ichhapur Road Chainage 442+500 To 442+950(Flyover)=0.45 Km At Pukudibandha Jn. With 100M Shifting For Ankuli Line Exi
Tender Value
1.33 Crore
Estimated cost
Bid Submission
29 Aug 2026
6 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Of Existing 900Mm Dia. Di Pipe Line Along Nh 16 From Kalibala To Pukudibandha Jn. In Connection With Puintola To Ichhapur Road Chainage 442+500 To 442+950(Flyover)=0.45 Km At Pukudibandha Jn. With 100M Shifting For Ankuli Line Existing 400 Mm Dia Di Pipe For Flyover Under Watco Division, Berh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge. |
| 2 | 1st Depth |
| 3 | 2nd Depth |
| 4 | 1st Depth |
| 5 | 2nd Depth |
| 6 | Thrust Block Foundation 1st Depth |
| 7 | 2nd Depth |
| 8 | 400mm Dia DI pipe |
| 9 | Earth work in stoney earth and gravels mixed with stone and boulder upto 0.014cum as per direction of the engineer–in–charge. |
| 10 | 1st Depth |
| 11 | 2nd Depth |
| 12 | 1st Depth |
| 13 | 2nd Depth |
| 14 | Supplying all materials, labour and T&P for filling foundation trenches with crusher dust and including watering and ramming including cost conveyance taxes and royalties of materials etc. all complete as per the direction of Engineer in charge. |
| 15 | Supplying all materials, labour, T&P and Laying in trenches centrifugally cast (spun) ductile iron pressure, socket & Spigot pipes, Class-K9 without cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification,complete for push on rubber gasket jointing including testing etc complete as per direction of E.I.C.(including cost of K9 D.I Pipe) |
| 16 | 900 mm DI K9 Pipe |
| 17 | 750 mm DI K9 Pipe |
| 18 | 400 mm DI K9 Pipe |
| 19 | Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. ( excluding Tyton Ring as below ). |
| 20 | 900 mm |
| 21 | 750 mm |
| 22 | 400 mm |
| 23 | Supplying all materials, labour T&P and laying in trenches C.I / D.I. fittings like Tees, bend, socket, spigot etc. conforming to IS :1538 ( Part-XIX) of the following nominal diameter as per specfication complete. |
| 24 | 900mm DI Pipe |
| 25 | 750 mm DI Pipe |
| 26 | 400mm DI Pipe |
| 27 | Supplying all materials, labour & T&P for fitting, fixing of following size of D.I Non Rising Spindle type metal seated Sluice Valve confirming to IS 14846 (PN 1.6) of (Make-VAG/ Talis/ AVK/IVC/ Kirloskar/Equivalent make with approval of the authority) and Air Valves/NR valves including cost of rubber insertion, nut & bolt but excluding cost of valves etc. all complete as per the direction of Engineer-in-charge including cost of valves. |
| 28 | 750mm dia D/I Sluice Valve - (P.N.-1.6 with wheel)- (IS 14866-2000) |
| 29 | 400mm dia D/I Sluice Valve - (P.N.-1.6 with wheel)- (IS 14866-2000) |
| 30 | 150 mm Dia DI Temper proof kinetic air valve (PN-1.6) |
| 31 | Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete. |
| 32 | S.V. chamber internal size:-[2.00x2.00x2.40mtr] for 700mm. to 1000mm. dia. S/V. |
| 33 | S.V. chamber size:-[1.0x1.0x1.5mtr] for 400dia. S/V. |
| 34 | Air valve chamber size :-[0.75x0.75x1.1mtr] |
| 35 | Supplying all labour , T&P for refilling the pipe line trenches with excavated materials, well rammed etc. all complete as per the direction of EIC. |
| 36 | Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 37 | Supplying all labour & T&P for dewatering during earth work in excavation to lower down the water table etc. by engaging required disel pumps etc all complete as per direction of EIC. |
| 38 | Engaging 2 nos 5HP dewatering pump form 8Hr /day for 70 days |
| 39 | Supplying all labour & T&P for Cement concrete(1:3:6) with 4CM size hard granite chips etc all complete as per direction of EIC. |
| 40 | Supplying all labour & T&P for Cement concrete (1:1.5:3) for R.C.C. works with 12mm size hard granite chips including centrering, shuttering and hoisting and laying etc all complete as per direction of EIC. |
| 41 | Supplying all materials, labour, T&P for providing M.S. reinforcement for R.C.C works including cutting, bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge as per direction of E.I.C. |
| 42 | Supplying all materials labour & T&P for laying in trenches M.S. pipes with specials for crossing of C.D of the following size including carriage of to worksite including the cost of joints and including cost painting two coats over a coat of primer etc all complete as per the direction of Engineer-in-charge.900 mm dia 17.5 mm thick |
| 43 | Supplying all materials labour & T&P for Flame cutting and facing of MS plate or pipes from 12mm to 25mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge. |
| 44 | Supplying all labour and T&P for jointing following dia MS pipe in treanches by electric arc welding & genetator set of pocket etc all complete ( at work site) |
| 45 | Providing M.S Flanged conforming to IS:3114-1994 to Flanged Cast Iron pipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nuts and rubber insertions as per specification and direction of the Engineer-in-charge, all complete. 950 mm dia 25mm thick |
| 46 | Supplying all materials labour and T&P for providing, fixing of C.I mechanical joint socket conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron / M.S Pipes including testing of joints as per specification complete etc. as per direction of Engineer-in-Charge. |
| 47 | 900 mm dia Mechanical Joint |
| 48 | 750 mm dia Mechanical Joint |
| 49 | 400 mm dia Mechanical Joint |
| 50 | For road cutting and restroration |
| 51 | Supplying all labour T&P for cutting of cement concrete road for taking the pipe line through etc. all complete as per the direction of Engineer-in-charge. |
| 52 | Construction of granular sub-base by providing close graded material,spreading in uniform layerswith motor grader on prepared surface,mixing by mix in place method with rotavator at OMC ,and compacting with vibratory rollar to achieve the desired density,complete as per clause 401 |
| 53 | Providing,Laying,spreading and compacting stone aggregateds of 45 mm sizes hand broken metal to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying amnd brooming requisite type of screening/binding materials to fill up the intersticsof coarse aggregate,watering and compacting to the required density. |
| 54 | Supplying all materials, labour & T&P for cement concrete (1:4:8) using 40mm size CBHG metal including laying , watering, curing & cost carriage royalties of the materials to the work site etc. all complete as per the direction of Engineer-in-charge |
| 55 | Supplying all materials, labour & T&P for cement concrete (1:2:4) using 12mm size CBHG chips including laying , watering, curing & cost carriage royalties of the materials to the work site etc. all complete as per the direction of Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender