Tender For Shifting Of Existing 900Mm Dia Di Pipe Line Along Nh 16 From Kalibala To Pukudibandha Jn. In Connection With Puintola To Ichhapur Road Chainage 434+350 To 435+000=0.65 Km At Ire Jn. (Vup) Under Watco Division, Berh Ur.
Tender Value
2.08 Crore
Estimated cost
Bid Submission
29 Aug 2026
6 days left
EMD
2.10 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Of Existing 900Mm Dia Di Pipe Line Along Nh 16 From Kalibala To Pukudibandha Jn. In Connection With Puintola To Ichhapur Road Chainage 434+350 To 435+000=0.65 Km At Ire Jn. (Vup) Under Watco Division, Berh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge. |
| 2 | 1st Depth |
| 3 | 2nd Depth |
| 4 | Thrust Block Foundation 1st Depth |
| 5 | 2nd Depth |
| 6 | Earth work in stoney earth and gravels mixed with stone and boulder upto 0.014cum as per direction of the engineer–in–charge. |
| 7 | 1st Depth |
| 8 | 2nd Depth |
| 9 | Supplying all materials, labour and T&P for filling foundation trenches with crusher dust and including watering and ramming including cost conveyance taxes and royalties of materials etc. all complete as per the direction of Engineer in charge. |
| 10 | Supplying all materials, labour, T&P and Laying in trenches centrifugally cast (spun) ductile iron pressure, socket & Spigot pipes, Class-K9 without cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification,complete for push on rubber gasket jointing including testing etc complete as per direction of E.I.C.(including cost of K9 D.I Pipe) |
| 11 | 900 mm DI K9 Pipe |
| 12 | Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. ( excluding Tyton Ring as below ).900 mm |
| 13 | Supplying all materials, labour T&P and laying in trenches C.I fittings like Tees, bend, socket, spigot etc. conforming to IS :1538 ( Part-XIX) of the following nominal diameter as per specfication complete. 900mm DI Pipe |
| 14 | Supplying all materials, labour & T&P for fitting, fixing of following size of D.I Non Rising Spindle type metal seated Sluice Valve confirming to IS 14846 (PN 1.6) of (Make-VAG/ Talis/ AVK/IVC/ Kirloskar/Equivalent make with approval of the authority) and Air Valves/NR valves including cost of rubber insertion, nut & bolt but excluding cost of valves etc. all complete as per the direction of Engineer-in-charge including cost of valves. |
| 15 | 900mm dia D/I Sluice Valve - (P.N.-1.6 with wheel)- (IS 14866-2000) |
| 16 | 150 mm Dia DI Temper proof kinetic air valve (PN-1.6) |
| 17 | Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete. |
| 18 | S.V. chamber internal size:-[2.00x2.00x2.40mtr] for 700mm. to 1000mm. dia. S/V. |
| 19 | Air valve chamber size :-[0.75x0.75x1.1mtr] |
| 20 | Supplying all labour , T&P for refilling the pipe line trenches with excavated materials, well rammed etc. all complete as per the direction of EIC. |
| 21 | Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 22 | Supplying all labour & T&P for dewatering during earth work in excavation to lower down the water table etc. by engaging required disel pumps etc all complete as per direction of EIC. |
| 23 | Engaging 2 nos 5HP dewatering pump form 8Hr /day for 30 days |
| 24 | Supplying all labour & T&P for Cement concrete(1:3:6) with 4CM size hard granite chips etc all complete as per direction of EIC.Thrust Block |
| 25 | Supplying all labour & T&P for Cement concrete (1:1.5:3) for R.C.C. works with 12mm size hard granite chips including centrering, shuttering and hoisting and laying etc all complete as per direction of EIC. Thrust Block |
| 26 | Supplying all materials, labour, T&P for providing M.S. reinforcement for R.C.C works including cutting, bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge as per direction of E.I.C. Thrust Block |
| 27 | Supplying all materials labour and T&P for providing, fixing of C.I mechanical joint socket conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron / M.S Pipes including testing of joints as per specification complete etc. as per direction of Engineer-in-Charge.900 mm dia Mechanical Joint |
| 28 | Supplying all labour T&P for cutting of cement concrete road for taking the pipe line through etc. all complete as per the direction of Engineer-in-charge. |
| 29 | Construction of granular sub-base by providing close graded material,spreading in uniform layerswith motor grader on prepared surface,mixing by mix in place method with rotavator at OMC ,and compacting with vibratory rollar to achieve the desired density,complete as per clause 401 |
| 30 | Providing,Laying,spreading and compacting stone aggregateds of 45 mm sizes hand broken metal to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying amnd brooming requisite type of screening/binding materials to fill up the intersticsof coarse aggregate,watering and compacting to the required density. |
| 31 | Supplying all materials, labour & T&P for cement concrete (1:4:8) using 40mm size CBHG metal including laying , watering, curing & cost carriage royalties of the materials to the work site etc. all complete as per the direction of Engineer-in-charge |
| 32 | Supplying all materials, labour & T&P for cement concrete (1:2:4) using 12mm size CBHG chips including laying , watering, curing & cost carriage royalties of the materials to the work site etc. all complete as per the direction of Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender