Tender For Repair / Maintenance To Wooden / Steel Furniture Including Re-Canning, Weaving, Polishing And Painting At Af Stn Darbhanga Under Ge Af Bihta
Tender Value
2 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
8 days left
EMD
4000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darbhanga → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance To Wooden / Steel Furniture Including Re-Canning, Weaving, Polishing And Painting At Af Stn Darbhanga Under Ge Af Bihta
BOQ
| Sl. No. | Item Description |
| 1 | PART-I WOODEN FURNITURE |
| 2 | BED PLYWOOD TOP (Drawing No-FD-246 & 247) |
| 3 | Removing worn out ply wood from head rest board and providing new teak ply of head rest (of suitable size), 3.5 mm thick one side teak faced and other side commercial plywood including 12mm x 10mm half round teak wood beading on head rest & preparation of surface & applying high gloss French polish on newly fixed head rest to match the colour with existing surface complete all as shown on drawing. |
| 4 | Description all as item No.-2.01 above but Foot rest. |
| 5 | Long rails of bed plywood top made out of 1st Class hard wood (shesham) of size 1800x100x35 mm and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing. |
| 6 | Plywood top 12 mm thick, commercial BWR of size 1800mm x 900 mm , IN REPLACEMENT, complete all as shown on drawing and directed. |
| 7 | Legs of head board made out of 1st Class hard wood (Shesham) of required shape and size including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 8 | Legs of foot board made out of Ist Class hard wood of required shape and size and including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 9 | CHAIR DINING (Drawing No-FD-16, 203, 228, 279 & FD/E6MAP/04) |
| 10 | Front legs made out of Ist class hard wood (Shesham) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed. |
| 11 | Rear legs made out of Ist class hard wood (shesham) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, comlpete all as per drawing and as directed. |
| 12 | Side rail made out of Ist class hard wood (Shesham) having suitable holes for caning, of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per dawinrg and as directed. |
| 13 | Rear rail made out of Ist class hard wood (Shesham) having suitable holes for caning, of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per dawinrg and as directed. |
| 14 | Front rail made out of Ist class hard wood (Shesham) having suitable holes for caning, of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per dawinrg and as directed. |
| 15 | Side stiffeners made of Ist class hard wood (shesham) of size and shape,IN REPLACEMENT, complete all as per drawing and as directed. |
| 16 | Center stiffeners made of Ist class hard wood (shesham) of size and shape,IN REPLACEMENT, complete all as per drawing and as directed. |
| 17 | Back rest made out of Ist class hard wood (shesham) of size and shape and applying one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and as directed. |
| 18 | Cushion with tapestry cloth of chair dining MAP of suitable size complete IN REPLACEMENT, all as shown drawing as directed .Make:- Sleepwell / Kurlon |
| 19 | CHAIR WRITING (Drawing No-FD-250 & 280) |
| 20 | Front legs made of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish as per drg, IN REPLACEMENT, complete. |
| 21 | Rear legs made of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish as per drg, IN REPLACEMENT, complete |
| 22 | Side rail made out of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish with suitable holes for caning as per drg, IN REPLACEMENT, complete. |
| 23 | Rear rail made out of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish with suitable holes for caning as per drg, IN REPLACEMENT, complete. |
| 24 | Front rail made out of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish with suitable holes for caning as per drg, IN REPLACEMENT, complete. |
| 25 | Arm rest made out of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish as per drg, IN REPLACEMENT, complete |
| 26 | Side stiffeners made of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish as per drg, IN REPLACEMENT, complete |
| 27 | Center stiffeners made of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish as per drg, IN REPLACEMENT, complete |
| 28 | Back rest made of 1st class hard wood (shesham / Teak wood) & including applying one coats of french polish to achieve glossy finish as per drg, IN REPLACEMENT, complete |
| 29 | CHAIR EASY (Drawing No-FD-17, 201 & 229) |
| 30 | Front / Rear legs made out of 1st class hard wood (Shesham) of suitable size and shape and applying with one coats of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT,complete all as per drawing and directed |
| 31 | Front rail made out of Ist class hard wood (shesham) with & including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed. |
| 32 | Front / Rear rail of seat made out of Ist class hard wood (shesham) with & including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed. |
| 33 | Top rail of back made out of Ist class hard wood (shesham) with & including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed. |
| 34 | Bottom rail of back made out of Ist class hard wood (shesham) with & including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT complete all as per drawing and directed. |
| 35 | Arm made out of 1st class hard wood (shesham) and applying one coat of french polish to achieve glossy finish and including minor fillings with putty as required, IN REPLACEMENT, complete all as per drawing and directed. |
| 36 | STOOL DRESSING (Drawing No-FD-27, 252 & 282) |
| 37 | Legs of stool dressing made out of Ist Class hard wood of required shape and size and including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 38 | Description all as item No.-6.01 above but side rail |
| 39 | Description all as item No.-6.01 above but Rear/ front rail |
| 40 | Description all as item No.-6.01 above but Side stiffeners |
| 41 | Description all as item No.-6.01 above but Center stiffeners |
| 42 | TABLE PEG (Drawing No-FD-25, 236 & 277) |
| 43 | Legs of table peg made out of Ist Class hard wood (shesham / Teak wood) of required shape and size and including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 44 | Description all as item No.-7.01 above but Front / Rear rail |
| 45 | Description all as item No.-7.01 above but stiffeners |
| 46 | Table top of suitable size, made of 18 mm thick pre-laminated particle board , bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 47 | TABLE CENTRE (Drawing No-FD-29, 274 & 235) |
| 48 | Legs of table centre made out of Ist Class hard wood (shesham / Teak wood) of required shape and size and including applying one coats of french polish to achieve glossy finish and minor fillings with putty as required, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 49 | Description all as item No.-8.01 above but Side rail |
| 50 | Description all as item No.-8.01 above but Front / Rear rail |
| 51 | Description all as item No.-8.01 above but Center stiffener |
| 52 | Table top of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish IN REPLACEMENT, complete all as shown on drawing and specified. |
| 53 | TEAPOY (Drawing No-FD-64, 232 & 278) |
| 54 | Teapoy leg made of Ist class hard wood (shesham) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 55 | Description all as item No.-9.01 above but Front / Rear rail |
| 56 | Description all as item No.-9.01 above but side stiffener |
| 57 | Table top of teapoy suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish IN REPLACEMENT, complete all as shown on drawing and specified. |
| 58 | TABLE DINING 6/8 PERSON (Drawing No-FD-273 & & 239) |
| 59 | Leg of table dining made of Ist class hard wood (shesham) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 60 | Description all as item No.-10.01 above but Side rail |
| 61 | Description all as item No.10.01 above but front / Rear stiffener |
| 62 | Table top of table dining, suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 63 | TABLE 3'x2' WITH OR WITHOUT DRAWER (Drawing No-FD-283, 284, 55, 209 & & 231) |
| 64 | Leg of table drawer made of Ist class hard wood (shesham) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 65 | Description all as item No.-11.01 above but Side rail |
| 66 | Description all as item No.-11.01 above but front / Rear rail |
| 67 | Description all as item No.-11.01 above but side stiffener |
| 68 | Description all as item No.-11.01 above but center stiffener |
| 69 | Drawer of 3'x2' with or without, suitable size made of 1st class hard wood as per drg, side & back of drawer should be made of 12mm thick teak wood & front should be 25mm thick teak wood with knob .Bottom of drawer should be 6mm thick commerciale ply wood, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 70 | Table top of table 3’X2’ with/without drawer of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 71 | TABLE DRESSING LADIES (Drawing No-FD-251 & 378) |
| 72 | Mirror 5 mm thick of suitable size, IN REPLACEMENT, complete all as shown on drawing and specified.MAKE:- Modi guard / Saint Gobin or equivalent mentioned in Appendix B |
| 73 | Sliding glass 4 mm thick shutter of table dressing ladies of suitable size, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 74 | Side/vertical partition of Table dressing ladies (box) made of 18 mm thick pre-laminated particle board, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 75 | Description all as item No.-12.03 above but Top / Bottom |
| 76 | Drawer of table dressing ladies, side & back of drawer should be made of 12mm thick teak commercial ply wood & front should be 19mm thickpre-laminated particle board with knob .Bottom of drawer should be 6mm thick commerciale ply wood, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 77 | Back of suitable size made of 06 mm thick commercial ply wood, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 78 | Sunmika (1mm thick) including 4 mm commercial plywood as per requirement for misc furniture etc complete. |
| 79 | TABLE DRESSING GENTS (Drawing No-FD-31, 230 & 278) |
| 80 | Mirror 5 mm thick of suitable size, IN REPLACEMENT, complete all as shown on drawing and specified.MAKE:- Modi guard / Saint Gobin or equivalent mentioned in Appendix B |
| 81 | Side/vertical partition of Table dressing Gents (box) made of 18 mm thick pre-laminated particle board, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 82 | Description all as item No.-13..03 above but Top / Bottom |
| 83 | Back of suitable size made of 06 mm thick commercial ply wood, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 84 | TABLE BED SIDE (FD-28,248, 276, 210) |
| 85 | Side of table bed side made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side and bottom shall be covered with 3mmX 18mm size teak wood beading fixed with panel pins, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 86 | Description all as item No.-14.01 above but Top. |
| 87 | Description all as item No.-14.01 above but centre/bottom self of 12mm thick prelaminated particle board. |
| 88 | Back of table bed side made out of 6 mm thick commercial grade plywood of suitable size, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 89 | TABLE WRITING (FD-249, 33 & 275) |
| 90 | Leg of table writing made of Ist class hard wood (shesham) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 91 | Description all as item No.-14.01 above but Side Stiffener. |
| 92 | Description all as item No.-14.01 above but Center Stiffener. |
| 93 | Box of table writing of suitable size, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins and back of box shuld be 6 mm ply duly given a coat of high gloss French polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 94 | Description all as item No.-15.04 above but Top of Table Writing. |
| 95 | SOFA SET 4/5 SEATER (FD- 281& 373) |
| 96 | Arm of sofa set 5 seater made out of Ist class hard wood (shesham) including preparation of new surfaces and applying high gloss French polish to match with the existing colour, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 97 | Description all as item No.-16.01 above but Front Leg. |
| 98 | Description all as item No.-16.01 above but Rear Leg. |
| 99 | Description all as item No.-16.01 above but Rail of Single Seater. |
| 100 | Description all as item No.-16.01 above but long rail of 3 seater. |
| 101 | 100 mm thick foam cushion, 40 density, size 520 x 560 mm duly covered with long cloth and leatherised rexin cloth /tapestry cloth not less than @ Rs 350 of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified.MAKE:- Sleepwell / Cool Gel / Kurlon |
| 102 | SIDE BOARD FD-241 |
| 103 | Leg of side board made of Ist class hard wood (Shesham) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surfaces, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 104 | Description all as item No.-17.01 above but front and rear long stiffener. |
| 105 | Description all as item No.-17.01 above but side stiffener. |
| 106 | Back ply of side board made out of 6 mm thick commercial grade ply wood of suitable size, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 107 | Top of side board, made of 18 mm thick pre-laminated particle board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high class french polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 108 | Description all as item No.-17.05 above but side. |
| 109 | Description all as item No.-17.05 above but Shutter. |
| 110 | Description all as item No.-17.05 above but Knob. |
| 111 | TABLE 3’X3’ (FD-291) |
| 112 | Leg of table 3’X3’ made of Ist class hard wood (Shesham) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 113 | Description all as item No.-18.01 above but side/front/rear rail. |
| 114 | Description all as item No.-18.01 above but corner. |
| 115 | Table top of table 3’X3’, made of 18 mm thick pre-laminated particle board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 116 | Caning existing wooden furniture(any type) with white plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 117 | Polishing wooden surfaces of following furniture items by rubbing down the old polish from the wooden surfaces with sand paper, removing pluck marks with wooden scraper, cleaning dirt and topping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish as per manufacturers instructions till glossy finish is achieved, complete all as shown on drawing and specified. |
| 118 | Bed plywood top. |
| 119 | Chair dining. |
| 120 | Chair Writing. |
| 121 | Chair easy. |
| 122 | Stool dressing CB. |
| 123 | Sofa Set four Seater. |
| 124 | Sofa Set five Seater. |
| 125 | Table peg. |
| 126 | Table Centre. |
| 127 | Teapoy. |
| 128 | Table Dining 6/8 persons. |
| 129 | Table 3’x2’ with drawer/without drawer. |
| 130 | Table dressing ladies. |
| 131 | Table dressing gents. |
| 132 | Table bed side. |
| 133 | Table writing. |
| 134 | Side board (FD-241). |
| 135 | Hat Stand (FD-362). |
| 136 | Table 3'x3'. |
| 137 | Book Case wooden. |
| 138 | SUBTOTAL |
| 139 | PART-II STEEL FURNITURE |
| 140 | Preparation of old painted iron & steel surfaces (externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any and filing the same with paste filler and applying a one coat primer and two coat of olive green/silver synthetic enamel paint to the following furniture items complete all as per drg and directed. |
| 141 | Almirah steel large |
| 142 | Almirah Steel Medium |
| 143 | Chair steel tubular with/without arms. |
| 144 | Rack Steel Adj enclosed type 6 tier |
| 145 | Table office officers steel. |
| 146 | Table clerk steel. |
| 147 | Locker steel. |
| 148 | Rack adj steel open 6 shelves |
| 149 | Book self open Large steel. |
| 150 | Chair school with hand board |
| 151 | Table 3x2 steel with drawer/without drawer |
| 152 | Shoe Rack Steel |
| 153 | ALMIRAH STEEL LARGE (FD-67 M, 351 & 1031) |
| 154 | Leg made out of plain back iron sheet 1mm thick of suitable size and welded including applying two coats of spray paints with olive green synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 155 | MS lock Godrej / Link (Including duplicate keys of stainless steel of size 65 mm), IN REPLACEMENT, complete all as shown on drawing and specified. |
| 156 | Stainless Steel handles 150 mm long of approved quality , IN REPLACEMENT, complete all as shown on drawing and specified. |
| 157 | Locking arrangement and locking bar of 8mm dia with cover for locking system made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer , IN REPLACEMENT, complete all as shown on drawing and specified. |
| 158 | Shelf made out of MS sheet 1mm thick band of required shape & size and welding the same properly in position including applying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 159 | Door single leaf made out of MS sheet 1 mm thick of the required shape and size and applying two coats of spray paints internally and externally with synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 160 | ALMIRAH STEEL MEDIUM (FD-67 M, 243, 350 &1032) |
| 161 | Leg made out of plain back iron sheet 1 mm thick of suitable size and welded including applying two coats of spray paints with olive green synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 162 | MS lock Godrej / Link (Including duplicate keys of stainless steel of size 65 mm), IN REPLACEMENT, complete all as shown on drawing and specified. |
| 163 | Stainless Steel handles 150 mm long of approved quality , IN REPLACEMENT, complete all as shown on drawing and specified. |
| 164 | Locking arrangement and locking bar of 8mm dia with cover for locking system made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer , IN REPLACEMENT, complete all as shown on drawing and specified. |
| 165 | Shelf made out of MS sheet 1mm thick band of required shape & size and welding the same properly in position including applying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 166 | Door single leaf made out of MS sheet 1 mm thick of the required shape and size and applying two coats of spray paints internally and externally with synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 167 | CHAIR VERANDAH STEEL (FD- 19& 256) |
| 168 | Canning with plastic cane 4 mm wide 1/2 round of approved quality including painting the frame with one coat of white synthetic enamel paint before recanning including PVC shoes for the legs, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 169 | CHAIR TUBULAR STEEL WITH/WITHOUT ARM (FD-75M) |
| 170 | Seat made out of teak wood frame duly canned, Godrej patten and applying two coats of high glossy French Polish fixed with new screws, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 171 | Description all as item No.-27.01 above but Back. |
| 172 | Arm of 1st class hard wood of suitable size and applying two coats of high glossy French Police fixed with new screws, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 173 | MS cleats of size 25 mm x 50 mm x 3 mm thick, welded to frame of seat of chair duly painted with one coat of (olive green) synthetic enamel paint over a coat of red oxide primer, complete all as shown on drawing and specified. |
| 174 | TABLE (3'X2') WITH / WITHOUT DRAWER (FD-1007 & 1008) |
| 175 | Top of suitable size made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side including all around teak wood beading of 4 mm x 18 mm size fixed with fevicol and panel pins, duly given a coat of high glossy french polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 176 | Stainless Steel drawer made of 1 mm thick PBI sheet duly painted with two coats of olive green colour paint over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 177 | Brass lock, with duplicate keys, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 178 | TABLE OFFICE CLERK STEEL (FD-84 M &1004) |
| 179 | Top of suitable size made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade, one side with approved shade and balancing with lamination on other side including all around teak wood beading of 4 mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 180 | Stainless Steel drawer made out of 1 mm thick PBI sheet duly painted one coat with synthetic enemal paint over one coat primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 181 | Brass lock, with duplicate keys, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 182 | TABLE OFFICE OFFICER STEEL (FD-1003) |
| 183 | Top of suitable size made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade, one side with approved shade and balancing with lamination on other side including all around teak wood beading of 4 mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 184 | Stainless Steel drawer made out of 1 mm thick PBI sheet duly painted one coat with synthetic enemal paint over one coat primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 185 | Brass lock, with duplicate keys, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 186 | TEAPOY VERANDAH (FD-255) |
| 187 | Top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade-I, one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4 mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 188 | De-rusting and Painting with one coat of white synthetic enamel paint of old steel surface of teapoy verandah and welding loose joints, if any, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 189 | TABLE COMPUTER |
| 190 | Top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side including all around teak wood beading of 4 mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 191 | Drawer 18mm thickness pre laminated particle board, 75mm deep on telescopic channel, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 192 | 18mm thick pre laminated particle board key board tray on telescopic channel, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 193 | De-rusting and Painting with one coat of white synthetic enamel paint of old steel surface and welding loose joints, if any, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 194 | LOCKER STEEL (FD-257 & 1029) |
| 195 | Leg made out of plain black iron sheet 1 mm thick of suitable size including applying a coat of red oxide primer and one coat of synthetic enamel paint after preparation of surface, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 196 | Mild steel chromium plated hasp and staple 100mm size, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 197 | Stainless steel handles 100 mm long, ISI Marked, of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 198 | MS hinges of 75 mm long of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 199 | Door single leaf made out of MS sheet 1 mm thick to the required shape and size and applying two coats of spray paints internally and externally with synthetic enamel paint over a coat of red oxide primer, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 200 | CHAIR REVOLVING |
| 201 | Seat and Back of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 202 | Pedestal of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 203 | Handle of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 204 | Twin wheel castors fitted in pedestal accessories of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 205 | Hydraulic up and down of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 206 | Preparation of loose weld point of all type of steel furniture and weld, complete all as shown on drawing and specified. |
| 207 | Chair Computer MAP |
| 208 | Seat and Back of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 209 | Pedestal of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 210 | Handle of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 211 | Twin wheel castors fitted in pedestal accessories of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 212 | Hydraulic up and down of approved quality, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 213 | Charpoy GI Ply top- FD-220 |
| 214 | 12 mm thick commercial ISI Marked ply wood with 10 Nos of nut and bolt with washer over GI Charpoy, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 215 | Long rail of GI pipe 32 mm dia medium grade, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 216 | Converting retrieved damaged long rail into one short rails & one leg from each long rail and making thread as per drg and replacing the unserviceable short rail/leg with converted rail/leg of Charpoy GI Pipe including supply & fixing MS clamp for MNF Set and welding 3mm thick MS plain black sheet, 40mm dia round shape of suitable size to 32mm bore at the bottom of leg as specified and shown on drg. |
| 217 | Converting legs of charpoy GI pipe from retrieved damaged short rail (one from each short rail) and making thread as per drg and replacing the unserviceable legs with converted serviceable leg of Charpoy GI Pipe including supply & fixing MS clamp for MNF Set and welding 3mm thick MS plain black sheet, 40mm dia round shape of suitable size to 32mm bore at the bottom of leg complete as specified and shown on drg. |
| 218 | 32 mm dia, 3 way elbows ISI marked, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 219 | GI Check nut 32 mm dia ISI marked, fixed in position, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 220 | Stiffner made of 35x5 mm flat iron 900 mm long made to shape shall be welded in frame for fixing of plywood, IN REPLACEMENT, complete all as shown on drawing and specified. |
| 221 | SUBTOTAL |
| 222 | Note : Amount of credit for retrieved materials is mentioned in Sch of credit of tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender