Tender For Supply, Installation, Testing And Commissioning Of Ev Charging Infrastructure For Electric Vehicle Including All Accessories And Allied Works For Parking Area At Mela Ground, Kanchanjungha Stadium
Tender Value
14.27 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
16 days left
EMD
28560
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning Of Ev Charging Infrastructure For Electric Vehicle Including All Accessories And Allied Works For Parking Area At Mela Ground, Kanchanjungha Stadium
BOQ
| Sl. No. | Item Description |
| 1 | Light EV DC Charger (Mode 4) Power Level 1: Up to 7 kW, Input power supply: 1phase 230 +10% Volt/3phase 415 Volt, Frequency: 50 Hz +/-5%, output supply: 12/24 Volt DC. Operational temperature range : -25 to 55 0C (outdoor), -5 to 55 0C (Indoor), RH upto 95%, Charging Device as per IS-17017-25, EV-EVSE Communication:IS-17017-25, one Charge Point Plug/ Socket as per IS-60309 and IS-17017-2, Vehicle Inlet/ Connector As per EV manufacturer, suitable for 2 Wheelers and 4 wheelers. Indoor use: at least IP42; Outdoor use: at least IP54. Mechanical Strength :protection of the external enclosure against mechanical impact shall be IK08 according to IEC 62262.O/L,S/C protection. Insulation Resistance > 1 M Ω. Cable Length: 7.5 m. RCD having a rated residual operating current not exceeding 30 mA; Separate RCD for multiple outputs. Telecommunication port of the EV supply equipment according to IS 13252 (Part 1) : 2010. OCPP(Open charge point protocol) 1.6J upgradable to ocpp 2.0. Device Should follow 17017 series of IS codes in general and the installation of the system shall comply with relevant IS Codes. |
| 2 | Parkbay DC Charger (Mode-3) Power Level 2: Normal Power ~24KW and above, 3 phase 415VAC(-40% to +20%), Frequency:50 Hz +/-5%, output supply: DC12/24 Volt, Operational temperature range : -25 to 550C (outdoor), -5 to 55 0C (Indoor), RH upto 95%,Charging Device as per Device/protocol: IS-17017-23,EV-EVSE Communication as per IS-17017-24, ISO15118, Infrastructure Socket as per IS-17017-2-2/3,Vehicle Connector as per IS-17017-2-3 Vehicle Inlet/Connector As per EV manufacturer, suitable for 4wheelers. Indoor use: at least IP42; Outdoor use: atleast IP54. Mechanical Strength: protection of theexternal enclosure against mechanical impact shall beIK08 according to IEC 62262. O/L,S/C protection.Insulation Resistance > 1 M Ω. Cable Length: 7.5 m. RCD having a rated residual operating current not exceeding 30 mA; Separate RCD for multiple outputs. Telecommunication port of the EV supply equipment according to IS 13252 (Part 1) : 2010. OCPP (Open charge point protocol) 1.6J upgradable to ocpp 2.0. Device Should follow 17017 series of IS codes in general and the installation of the system shall comply with relevant IS Codes. |
| 3 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. : 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 4 | Supplying & Erection of mini size feeder pillar box of Size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5\\" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C |
| 5 | Supplying & fixing sheetmetal (16SWG) Iron Clad Busbar chambers on angle ironframe on wall, incl. Earthing attachment and paintingas required–(As per Drawing no. 470 of PWDSpecification Book – May 1991) : Cu 4 bars 415 V, 100/125 A |
| 6 | Supplying and fixing 415V Four Pole MCCB ofBreaking capacity 25kA/35kA with fixed thermaland fixed magnetic /adjustable thermal and fixedmagnetic setting inexisting DBs / enclosureandnecessary connection: 63 A (Make: Legrand) |
| 7 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 8 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender