Road Transport and Highways Boards / Undertakings / PSU Closing in 9 days TDR #56993830

Tender For Works Contract For Carrying Out Supply And Application Of Hot & Cold Insulation Works On Equipment, Vessels, Exchangers, Piping, Etc. On Sub-Contract Basis In Connection With Composite Works For Pdh Unit For Gail Usar Pdh-Pp Project At Usa

Issued by Boards / Undertakings / PSU · Raigad, Maharashtra
Tender Value
10.58 Crore
Estimated cost
Bid Submission
02 Sep 2026
9 days left
EMD
12.90 Lakhs
Bank guarantee accepted
Document Fee
16284
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Works Contract For Carrying Out Supply And Application Of Hot & Cold Insulation Works On Equipment, Vessels, Exchangers, Piping, Etc. On Sub-Contract Basis In Connection With Composite Works For Pdh Unit For Gail Usar Pdh-Pp Project At Usar, Alibag, Dist. Raigad, Maharashtra

BOQ

Name of Work:- Works Contract for Carrying out supply and application of Hot & Cold Insulation works on Equipment, Vessels, Exchangers, Piping, etc. on Sub-Contract basis in connection with Composite Works for PDH Unit for GAIL Usar PDH-PP Project at Usar, Alibag, Dist. Raigad, Maharashtra
Sl. No. Item Description
1*************************************************************** LEGENDS / NOTES FOR INSULATION WORKS ***************************************************************** Types of Insulation : IH = Insulation for Heat Conservation IT = Insulation for Steam Traced Lines IS = Insulation for Personal Safety IC = Cold Insulation for Anti-condensation IE = Insulation for Electrically Traced Lines IJ = Insulation for Jacketed Lines IK = Insulation for Dual Insulated Lines S2 = Hot Insulation for Catofin System Piping V = Accoustic Insulation for Hot Service R(V) = Accoustic Insulation for Cold Service ** Basic Line Surface Materials : CS = Carbon Steel (Including LT Carbon Steel) AS = Alloy Steel SS = Stainless Steel** Notes :1. For insulation type IT,tracer size and tracer numbers shall be as per specification.2. Insulation thickness for IC where insulation material is Poly Urethane foam (PUF) / Poly Isocyanurate (PIC) + Cellular Glass includes outer layer of 50mm of Cellular Glass and Inner layer of balance thickness of PUF/PIC3. Insulation for IE consists of inner layer of Rockwool and outer layer of PUF / PIC. The thicknesses have been specified as THK(I) and THK(O) for inner and outer layers respectively.4.Insulation for S2 consists of Hot Insulation as per the Annesxure-3(Table) and Licensor requirements - H270 for the Special Insulation requirements for the Catofin Reactor Piping systems.5.Insulation for (V) consists of Accoustic Insulation for Hot Service.6. Insulation for R(V) consists of Accoustic Insulation for Cold Service.***************************************************************
2HOT INSULATION (UNITS) ; Providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(Llyods/BV/DNV or any other Client approved party) at manufacturer's shop & sample check/inspection at site by EIL Construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. Providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of Engineer-in-charge. (Refer Legend for applicable EIL specification)
3INSULATION TYPE : IH; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO 175 (DEG C); INSULATION MATERIAL : ROCKWOOL
4PIPES
5NB 00.50 INCHES; THICKNESS 25 MM
6NB 00.50 INCHES; THICKNESS 40 MM
7NB 00.75 INCHES; THICKNESS 25 MM
8NB 00.75 INCHES; THICKNESS 40 MM
9NB 01.00 INCHES; THICKNESS 25 MM
10NB 01.50 INCHES; THICKNESS 25 MM
11NB 01.50 INCHES; THICKNESS 40 MM
12NB 02.00 INCHES; THICKNESS 25 MM
13NB 02.00 INCHES; THICKNESS 40 MM
14NB 03.00 INCHES; THICKNESS 25 MM
15NB 03.00 INCHES; THICKNESS 40 MM
16NB 04.00 INCHES; THICKNESS 25 MM
17NB 04.00 INCHES; THICKNESS 40 MM
18NB 06.00 INCHES; THICKNESS 25 MM
19NB 06.00 INCHES; THICKNESS 40 MM
20NB 08.00 INCHES; THICKNESS 25 MM
21NB 08.00 INCHES; THICKNESS 40 MM
22NB 10.00 INCHES; THICKNESS 25 MM
23NB 10.00 INCHES; THICKNESS 50 MM
24NB 12.00 INCHES; THICKNESS 25 MM
25NB 12.00 INCHES; THICKNESS 50 MM
26NB 14.00 INCHES; THICKNESS 25 MM
27NB 16.00 INCHES; THICKNESS 25 MM
28NB 20.00 INCHES; THICKNESS 25 MM
29NB 24.00 INCHES; THICKNESS 25 MM
30NB 30.00 INCHES; THICKNESS 25 MM
31NB 36.00 INCHES; THICKNESS 25 MM
32NB 48.00 INCHES; THICKNESS 25 MM
33FLANGE ASSEMBLIES
34NB 01.00 INCHES; THICKNESS 25 MM
35NB 01.50 INCHES; THICKNESS 40 MM
36NB 03.00 INCHES; THICKNESS 40 MM
37NB 04.00 INCHES; THICKNESS 25 MM
38NB 04.00 INCHES; THICKNESS 40 MM
39NB 06.00 INCHES; THICKNESS 40 MM
40NB 10.00 INCHES; THICKNESS 50 MM
41NB 12.00 INCHES; THICKNESS 50 MM
42BLIND FLANGE ASSEMBLIES
43NB 00.75 INCHES; THICKNESS 25 MM
44NB 00.75 INCHES; THICKNESS 40 MM
45NB 01.00 INCHES; THICKNESS 25 MM
46NB 02.00 INCHES; THICKNESS 25 MM
47NB 02.00 INCHES; THICKNESS 40 MM
48NB 03.00 INCHES; THICKNESS 25 MM
49NB 08.00 INCHES; THICKNESS 25 MM
50NB 14.00 INCHES; THICKNESS 25 MM
51VALVE ASSEMBLIES
52NB 00.50 INCHES; THICKNESS 25 MM
53NB 00.50 INCHES; THICKNESS 40 MM
54NB 00.75 INCHES; THICKNESS 25 MM
55NB 00.75 INCHES; THICKNESS 40 MM
56NB 01.00 INCHES; THICKNESS 25 MM
57NB 01.50 INCHES; THICKNESS 25 MM
58NB 02.00 INCHES; THICKNESS 25 MM
59NB 02.00 INCHES; THICKNESS 40 MM
60NB 03.00 INCHES; THICKNESS 25 MM
61NB 03.00 INCHES; THICKNESS 40 MM
62NB 04.00 INCHES; THICKNESS 25 MM
63NB 04.00 INCHES; THICKNESS 40 MM
64NB 06.00 INCHES; THICKNESS 25 MM
65NB 06.00 INCHES; THICKNESS 40 MM
66NB 08.00 INCHES; THICKNESS 40 MM
67NB 10.00 INCHES; THICKNESS 50 MM
68NB 12.00 INCHES; THICKNESS 50 MM
69NB 14.00 INCHES; THICKNESS 25 MM
70INSULATION TYPE : IH; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : 176 (DEG C) TO 350 (DEG C); INSULATION MATERIAL : ROCKWOOL
71PIPES
72NB 00.50 INCHES; THICKNESS 40 MM
73NB 00.50 INCHES; THICKNESS 50 MM
74NB 00.75 INCHES; THICKNESS 40 MM
75NB 00.75 INCHES; THICKNESS 50 MM
76NB 01.00 INCHES; THICKNESS 40 MM
77NB 01.00 INCHES; THICKNESS 50 MM
78NB 01.50 INCHES; THICKNESS 40 MM
79NB 01.50 INCHES; THICKNESS 50 MM
80NB 02.00 INCHES; THICKNESS 40 MM
81NB 02.00 INCHES; THICKNESS 50 MM
82NB 02.00 INCHES; THICKNESS 65 MM
83NB 03.00 INCHES; THICKNESS 40 MM
84NB 03.00 INCHES; THICKNESS 50 MM
85NB 03.00 INCHES; THICKNESS 65 MM
86NB 04.00 INCHES; THICKNESS 40 MM
87NB 04.00 INCHES; THICKNESS 65 MM
88NB 06.00 INCHES; THICKNESS 40 MM
89NB 06.00 INCHES; THICKNESS 65 MM
90NB 08.00 INCHES; THICKNESS 50 MM
91NB 08.00 INCHES; THICKNESS 75 MM
92NB 10.00 INCHES; THICKNESS 50 MM
93NB 10.00 INCHES; THICKNESS 75 MM
94NB 12.00 INCHES; THICKNESS 50 MM
95NB 12.00 INCHES; THICKNESS 65 MM
96NB 12.00 INCHES; THICKNESS 75 MM
97NB 16.00 INCHES; THICKNESS 50 MM
98NB 16.00 INCHES; THICKNESS 75 MM
99NB 20.00 INCHES; THICKNESS 50 MM
100NB 24.00 INCHES; THICKNESS 65 MM
101NB 24.00 INCHES; THICKNESS 75 MM
102NB 60.00 INCHES; THICKNESS 75 MM
103FLANGE ASSEMBLIES
104NB 01.50 INCHES; THICKNESS 40 MM
105NB 02.00 INCHES; THICKNESS 40 MM
106NB 02.00 INCHES; THICKNESS 50 MM
107NB 02.00 INCHES; THICKNESS 65 MM
108NB 03.00 INCHES; THICKNESS 40 MM
109NB 03.00 INCHES; THICKNESS 65 MM
110NB 04.00 INCHES; THICKNESS 40 MM
111NB 06.00 INCHES; THICKNESS 40 MM
112NB 06.00 INCHES; THICKNESS 65 MM
113NB 10.00 INCHES; THICKNESS 50 MM
114NB 10.00 INCHES; THICKNESS 75 MM
115NB 16.00 INCHES; THICKNESS 50 MM
116NB 16.00 INCHES; THICKNESS 75 MM
117NB 20.00 INCHES; THICKNESS 50 MM
118BLIND FLANGE ASSEMBLIES
119NB 00.75 INCHES; THICKNESS 40 MM
120NB 00.75 INCHES; THICKNESS 50 MM
121NB 01.00 INCHES; THICKNESS 40 MM
122NB 01.00 INCHES; THICKNESS 50 MM
123NB 01.50 INCHES; THICKNESS 40 MM
124NB 02.00 INCHES; THICKNESS 40 MM
125NB 04.00 INCHES; THICKNESS 40 MM
126NB 04.00 INCHES; THICKNESS 65 MM
127NB 06.00 INCHES; THICKNESS 65 MM
128NB 08.00 INCHES; THICKNESS 50 MM
129VALVE ASSEMBLIES
130NB 00.50 INCHES; THICKNESS 40 MM
131NB 00.50 INCHES; THICKNESS 50 MM
132NB 00.75 INCHES; THICKNESS 40 MM
133NB 00.75 INCHES; THICKNESS 50 MM
134NB 01.00 INCHES; THICKNESS 40 MM
135NB 01.00 INCHES; THICKNESS 50 MM
136NB 01.50 INCHES; THICKNESS 40 MM
137NB 01.50 INCHES; THICKNESS 50 MM
138NB 02.00 INCHES; THICKNESS 40 MM
139NB 02.00 INCHES; THICKNESS 65 MM
140NB 03.00 INCHES; THICKNESS 40 MM
141NB 03.00 INCHES; THICKNESS 65 MM
142NB 04.00 INCHES; THICKNESS 40 MM
143NB 04.00 INCHES; THICKNESS 65 MM
144NB 06.00 INCHES; THICKNESS 40 MM
145NB 06.00 INCHES; THICKNESS 65 MM
146NB 10.00 INCHES; THICKNESS 75 MM
147NB 12.00 INCHES; THICKNESS 50 MM
148NB 12.00 INCHES; THICKNESS 75 MM
149NB 16.00 INCHES; THICKNESS 50 MM
150NB 20.00 INCHES; THICKNESS 50 MM
151INSULATION TYPE : IH; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : 351 (DEG C) TO 500 (DEG C); INSULATION MATERIAL : ROCKWOOL
152PIPES
153NB 00.50 INCHES; THICKNESS 75 MM
154NB 00.75 INCHES; THICKNESS 65 MM
155NB 00.75 INCHES; THICKNESS 75 MM
156NB 01.00 INCHES; THICKNESS 75 MM
157NB 01.50 INCHES; THICKNESS 75 MM
158NB 01.50 INCHES; THICKNESS 90 MM
159NB 02.00 INCHES; THICKNESS 90 MM
160NB 03.00 INCHES; THICKNESS 90 MM
161NB 04.00 INCHES; THICKNESS 115 MM
162NB 06.00 INCHES; THICKNESS 100 MM
163NB 06.00 INCHES; THICKNESS 115 MM
164NB 08.00 INCHES; THICKNESS 100 MM
165NB 08.00 INCHES; THICKNESS 125 MM
166NB 10.00 INCHES; THICKNESS 115 MM
167NB 10.00 INCHES; THICKNESS 125 MM
168NB 12.00 INCHES; THICKNESS 115 MM
169NB 16.00 INCHES; THICKNESS 115 MM
170NB 18.00 INCHES; THICKNESS 140 MM
171NB 30.00 INCHES; THICKNESS 140 MM
172NB 78.00 INCHES; THICKNESS 140 MM
173FLANGE ASSEMBLIES
174NB 01.00 INCHES; THICKNESS 75 MM
175NB 02.00 INCHES; THICKNESS 90 MM
176NB 03.00 INCHES; THICKNESS 90 MM
177NB 06.00 INCHES; THICKNESS 100 MM
178NB 08.00 INCHES; THICKNESS 100 MM
179NB 10.00 INCHES; THICKNESS 115 MM
180NB 16.00 INCHES; THICKNESS 115 MM
181BLIND FLANGE ASSEMBLIES
182NB 00.75 INCHES; THICKNESS 65 MM
183VALVE ASSEMBLIES
184NB 00.75 INCHES; THICKNESS 65 MM
185NB 01.00 INCHES; THICKNESS 75 MM
186NB 01.50 INCHES; THICKNESS 75 MM
187NB 02.00 INCHES; THICKNESS 90 MM
188NB 03.00 INCHES; THICKNESS 90 MM
189NB 06.00 INCHES; THICKNESS 100 MM
190NB 08.00 INCHES; THICKNESS 100 MM
191NB 10.00 INCHES; THICKNESS 115 MM
192NB 16.00 INCHES; THICKNESS 115 MM
193INSULATION TYPE : IT; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO 175 (DEG C); INSULATION MATERIAL : ROCKWOOL
194PIPES
195NB 00.50 INCHES; THICKNESS 25 MM
196NB 00.75 INCHES; THICKNESS 25 MM
197NB 01.00 INCHES; THICKNESS 25 MM
198NB 01.50 INCHES; THICKNESS 25 MM
199NB 02.00 INCHES; THICKNESS 25 MM
200NB 03.00 INCHES; THICKNESS 25 MM
201NB 04.00 INCHES; THICKNESS 25 MM
202NB 06.00 INCHES; THICKNESS 25 MM
203NB 08.00 INCHES; THICKNESS 25 MM
204NB 08.00 INCHES; THICKNESS 40 MM
205NB 10.00 INCHES; THICKNESS 25 MM
206NB 12.00 INCHES; THICKNESS 25 MM
207FLANGE ASSEMBLIES
208NB 01.00 INCHES; THICKNESS 25 MM
209NB 01.50 INCHES; THICKNESS 25 MM
210NB 02.00 INCHES; THICKNESS 25 MM
211NB 03.00 INCHES; THICKNESS 25 MM
212NB 04.00 INCHES; THICKNESS 25 MM
213NB 06.00 INCHES; THICKNESS 25 MM
214NB 08.00 INCHES; THICKNESS 40 MM
215NB 10.00 INCHES; THICKNESS 25 MM
216NB 12.00 INCHES; THICKNESS 25 MM
217BLIND FLANGE ASSEMBLIES
218NB 00.75 INCHES; THICKNESS 25 MM
219VALVE ASSEMBLIES
220NB 00.50 INCHES; THICKNESS 25 MM
221NB 00.75 INCHES; THICKNESS 25 MM
222NB 01.00 INCHES; THICKNESS 25 MM
223NB 01.50 INCHES; THICKNESS 25 MM
224NB 02.00 INCHES; THICKNESS 25 MM
225NB 03.00 INCHES; THICKNESS 25 MM
226NB 04.00 INCHES; THICKNESS 25 MM
227NB 06.00 INCHES; THICKNESS 25 MM
228NB 08.00 INCHES; THICKNESS 25 MM
229NB 08.00 INCHES; THICKNESS 40 MM
230NB 10.00 INCHES; THICKNESS 25 MM
231NB 12.00 INCHES; THICKNESS 25 MM
232INSULATION TYPE : IT; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : 176 (DEG C) TO 350 (DEG C); INSULATION MATERIAL : ROCKWOOL
233PIPES
234NB 06.00 INCHES; THICKNESS 40 MM
235FLANGE ASSEMBLIES
236NB 06.00 INCHES; THICKNESS 40 MM
237INSULATION TYPE : IS; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO 175 (DEG C); INSULATION MATERIAL : ROCKWOOL
238PIPES
239NB 00.50 INCHES; THICKNESS 25 MM
240NB 00.75 INCHES; THICKNESS 25 MM
241NB 01.00 INCHES; THICKNESS 25 MM
242NB 01.50 INCHES; THICKNESS 25 MM
243NB 02.00 INCHES; THICKNESS 25 MM
244NB 03.00 INCHES; THICKNESS 25 MM
245NB 04.00 INCHES; THICKNESS 25 MM
246NB 06.00 INCHES; THICKNESS 25 MM
247NB 08.00 INCHES; THICKNESS 25 MM
248NB 10.00 INCHES; THICKNESS 25 MM
249NB 12.00 INCHES; THICKNESS 25 MM
250NB 16.00 INCHES; THICKNESS 25 MM
251NB 24.00 INCHES; THICKNESS 25 MM
252NB 30.00 INCHES; THICKNESS 25 MM
253NB 36.00 INCHES; THICKNESS 25 MM
254NB 48.00 INCHES; THICKNESS 25 MM
255NB 54.00 INCHES; THICKNESS 25 MM
256NB 84.00 INCHES; THICKNESS 25 MM
257FLANGE ASSEMBLIES
258NB 01.50 INCHES; THICKNESS 25 MM
259NB 02.00 INCHES; THICKNESS 25 MM
260NB 03.00 INCHES; THICKNESS 25 MM
261NB 04.00 INCHES; THICKNESS 25 MM
262NB 06.00 INCHES; THICKNESS 25 MM
263NB 08.00 INCHES; THICKNESS 25 MM
264NB 10.00 INCHES; THICKNESS 25 MM
265NB 12.00 INCHES; THICKNESS 25 MM
266BLIND FLANGE ASSEMBLIES
267NB 00.75 INCHES; THICKNESS 25 MM
268NB 08.00 INCHES; THICKNESS 25 MM
269VALVE ASSEMBLIES
270NB 00.50 INCHES; THICKNESS 25 MM
271NB 00.75 INCHES; THICKNESS 25 MM
272NB 01.00 INCHES; THICKNESS 25 MM
273NB 01.50 INCHES; THICKNESS 25 MM
274NB 02.00 INCHES; THICKNESS 25 MM
275NB 03.00 INCHES; THICKNESS 25 MM
276NB 04.00 INCHES; THICKNESS 25 MM
277NB 06.00 INCHES; THICKNESS 25 MM
278NB 08.00 INCHES; THICKNESS 25 MM
279NB 10.00 INCHES; THICKNESS 25 MM
280INSULATION TYPE : IS; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : 176 (DEG C) TO 350 (DEG C); INSULATION MATERIAL : ROCKWOOL
281PIPES
282NB 00.50 INCHES; THICKNESS 25 MM
283NB 00.75 INCHES; THICKNESS 25 MM
284NB 01.50 INCHES; THICKNESS 25 MM
285NB 02.00 INCHES; THICKNESS 25 MM
286NB 16.00 INCHES; THICKNESS 40 MM
287FLANGE ASSEMBLIES
288NB 01.50 INCHES; THICKNESS 25 MM
289NB 02.00 INCHES; THICKNESS 25 MM
290NB 16.00 INCHES; THICKNESS 40 MM
291BLIND FLANGE ASSEMBLIES
292NB 00.75 INCHES; THICKNESS 25 MM
293VALVE ASSEMBLIES
294NB 00.50 INCHES; THICKNESS 25 MM
295NB 00.75 INCHES; THICKNESS 25 MM
296NB 02.00 INCHES; THICKNESS 25 MM
297NB 16.00 INCHES; THICKNESS 40 MM
298INSULATION TYPE : IH; SURFACE MATERIAL : SS; OPERATING TEMP. RANGE : UPTO 175 (DEG C); INSULATION MATERIAL : INHIBITED ROCKWOOL
299PIPES
300NB 00.75 INCHES; THICKNESS 25 MM
301NB 01.50 INCHES; THICKNESS 25 MM
302NB 02.00 INCHES; THICKNESS 25 MM
303NB 20.00 INCHES; THICKNESS 25 MM
304INSULATION TYPE : IH; SURFACE MATERIAL : SS; OPERATING TEMP. RANGE : 351 (DEG C) TO 500 (DEG C); INSULATION MATERIAL : INHIBITED ROCKWOOL
305PIPES
306NB 01.50 INCHES; THICKNESS 90 MM
307NB 01.50 INCHES; THICKNESS 100 MM
308NB 02.00 INCHES; THICKNESS 115 MM
309NB 04.00 INCHES; THICKNESS 115 MM
310NB 24.00 INCHES; THICKNESS 165 MM
311NB 36.00 INCHES; THICKNESS 140 MM
312NB 54.00 INCHES; THICKNESS 165 MM
313NB 84.00 INCHES; THICKNESS 165 MM
314FLANGE ASSEMBLIES
315NB 00.75 INCHES; THICKNESS 90 MM
316NB 01.50 INCHES; THICKNESS 100 MM
317NB 04.00 INCHES; THICKNESS 115 MM
318NB 24.00 INCHES; THICKNESS 165 MM
319NB 36.00 INCHES; THICKNESS 140 MM
320VALVE ASSEMBLIES
321NB 04.00 INCHES; THICKNESS 115 MM
322INSULATION TYPE : IS; SURFACE MATERIAL : SS; OPERATING TEMP. RANGE : 351 (DEG C) TO 500 (DEG C); INSULATION MATERIAL : INHIBITED ROCKWOOL
323PIPES
324NB 00.75 INCHES; THICKNESS 50 MM
325NB 36.00 INCHES; THICKNESS 115 MM
326INSULATION TYPE : S2 (HOT INSULATION); SURFACE MATERIAL : SS321H; OPERATING TEMP. RANGE : 551 (DEGC) TO 650 (DEG C); INSULATION MATERIAL : CERAMIC FIBRE, (EIL spec 6-79-0005) & LICENSOR SPECIFCATION H-270 TO BE REFERRED.
327PIPES
328NB 00.75 INCHES; THICKNESS 200 MM
329NB 01.00 INCHES; THICKNESS 200 MM
330NB 01.50 INCHES; THICKNESS 200 MM
331NB 02.00 INCHES; THICKNESS 200 MM
332NB 06.00 INCHES; THICKNESS 200 MM
333NB 08.00 INCHES; THICKNESS 200 MM
334NB 10.00 INCHES; THICKNESS 200 MM
335NB 12.00 INCHES; THICKNESS 200 MM
336NB 16.00 INCHES; THICKNESS 200 MM
337NB24.00 INCHES; THICKNESS 200 MM
338NB30.00 INCHES; THICKNESS 200 MM
339NB36.00 INCHES; THICKNESS 200 MM
340NB 42.00 INCHES; THICKNESS 200 MM
341NB 48.00 INCHES; THICKNESS 200 MM
342NB 60.00 INCHES; THICKNESS 200 MM
343NB 72.00 INCHES; THICKNESS 200 MM
344NB 78.00 INCHES; THICKNESS 200 MM
345NB 84.00 INCHES; THICKNESS 200 MM
346NB 90.00 INCHES; THICKNESS 200 MM
347Valve Assemblies
348NB 01.00 INCHES; THICKNESS 200 MM
349NB 02.00 INCHES; THICKNESS 200 MM
350NB 06.00 INCHES; THICKNESS 200 MM
351NB 10.00 INCHES; THICKNESS 200 MM
352NB 12.00 INCHES; THICKNESS 200 MM
353NB 16.00 INCHES; THICKNESS 200 MM
354FLANGE ASSEMBLIES
355NB 00.75 INCHES; THICKNESS 200 MM
356NB 01.00 INCHES; THICKNESS 200 MM
357NB 01.50 INCHES; THICKNESS 200 MM
358NB 02.00 INCHES; THICKNESS 200 MM
359NB 06.00 INCHES; THICKNESS 200 MM
360NB 08.00 INCHES; THICKNESS 200 MM
361NB 10.00 INCHES; THICKNESS 200 MM
362NB 12.00 INCHES; THICKNESS 200 MM
363NB 16.00 INCHES; THICKNESS 200 MM
364NB 24.00 INCHES; THICKNESS 200 MM
365NB 36.00 INCHES; THICKNESS 200 MM
366NB 60.00 INCHES; THICKNESS 200 MM
367NB 90.00 INCHES; THICKNESS 200 MM
368INSULATION TYPE : S2 (HOT INSULATION); SURFACE MATERIAL : SS321H; OPERATING TEMP. RANGE : 651 (DEGC) TO 760 (DEG C); INSULATION MATERIAL : CERAMIC FIBRE, (EIL spec 6-79-0005) & LICENSOR SPECIFCATION H-270 TO BE REFERRED.
369PIPES
370NB 01.00 INCHES; THICKNESS 200 MM
371NB 02.00 INCHES; THICKNESS 200 MM
372NB 10.00 INCHES; THICKNESS 200 MM
373NB 24.00 INCHES; THICKNESS 215 MM
374NB30.00 INCHES; THICKNESS 215 MM
375NB36.00 INCHES; THICKNESS 215 MM
376NB48.00 INCHES; THICKNESS 215 MM
377NB 72.00 INCHES; THICKNESS 215 MM
378NB 84.00 INCHES; THICKNESS 215 MM
379FLANGE ASSEMBLIES
380NB 01.00 INCHES; THICKNESS 200 MM
381NB 01.50 INCHES; THICKNESS 200 MM
382NB 02.00 INCHES; THICKNESS 200 MM
383NB 10.00 INCHES; THICKNESS 200 MM
384NB 24.00 INCHES; THICKNESS 215 MM
385NB 30.00 INCHES; THICKNESS 215 MM
386NB 36.00 INCHES; THICKNESS 215 MM
387NB 48.00 INCHES; THICKNESS 215 MM
388VALVE ASSEMBLIES
389NB01.00 INCHES; THICKNESS 200 MM
390NB02.00 INCHES; THICKNESS 200 MM
391NB10.00 INCHES; THICKNESS 200 MM
392NB24.00 INCHES; THICKNESS 215 MM
393NB30.00 INCHES; THICKNESS 215 MM
394NB36.00 INCHES; THICKNESS 215 MM
395NB48.00 INCHES; THICKNESS 215 MM
396INSULATION TYPE : V (ACCOUSTIC INSULATION FOR HOT SERVICE ); SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO 175 (DEG C); INSULATION MATERIAL : ROCKWOOL, ALSO REFER ACCOUSTIC INSULATION SPEC. 6-79-0022.(Wherever hot insulation + acoustic is required, higher of the two thicknesses shall apply and cladding for acoustic (which is heavier than normal hot insulation) shall apply. This will serve both hot and acoustic service)
397PIPES
398NB 00.75 INCHES; THICKNESS 100 MM
399NB 01.00 INCHES; THICKNESS 100 MM
400NB 01.50 INCHES; THICKNESS 100 MM
401NB 02.00 INCHES; THICKNESS 100 MM
402NB 03.00 INCHES; THICKNESS 100 MM
403NB 04.00 INCHES; THICKNESS 100 MM
404NB 06.00 INCHES; THICKNESS 100 MM
405NB 008.00 INCHES; THICKNESS 100 MM
406NB 10.00 INCHES; THICKNESS 100 MM
407NB 12.00 INCHES; THICKNESS 100 MM
408NB 14.00 INCHES; THICKNESS 100 MM
409NB 16.00 INCHES; THICKNESS 100 MM
410NB 18.00 INCHES; THICKNESS 100 MM
411NB 20.00 INCHES; THICKNESS 100 MM
412NB 24.00 INCHES; THICKNESS 100 MM
413NB30.00 INCHES; THICKNESS 100 MM
414NB36.00 INCHES; THICKNESS 100 MM
415NB42.00 INCHES; THICKNESS 100 MM
416NB48.00 INCHES; THICKNESS 100 MM
417NB 54.00 INCHES; THICKNESS 100 MM
418NB60.00 INCHES; THICKNESS 100 MM
419NB66.00 INCHES; THICKNESS 100 MM
420NB 72.00 INCHES; THICKNESS 100 MM
421NB 78.00 INCHES; THICKNESS 100 MM
422FLANGE ASSEMBLIES
423NB 00.75 INCHES; THICKNESS 100 MM
424NB 01.00 INCHES; THICKNESS 100 MM
425NB 01.50 INCHES; THICKNESS 100 MM
426NB 02.00 INCHES; THICKNESS 100 MM
427NB 03.00 INCHES; THICKNESS 100 MM
428NB 04.00 INCHES; THICKNESS 100 MM
429NB 06.00 INCHES; THICKNESS 100 MM
430NB 08.00 INCHES; THICKNESS 100 MM
431NB 10.00 INCHES; THICKNESS 100 MM
432NB 12.00 INCHES; THICKNESS 100 MM
433NB 14.00 INCHES; THICKNESS 100 MM
434NB 16.00 INCHES; THICKNESS 100 MM
435NB 18.00 INCHES; THICKNESS 100 MM
436NB 20.00 INCHES; THICKNESS 100 MM
437NB 24.00 INCHES; THICKNESS 100 MM
438NB 30.00 INCHES; THICKNESS 100 MM
439NB 36.00 INCHES; THICKNESS 100 MM
440NB 40.00 INCHES; THICKNESS 100 MM
441NB 42.00 INCHES; THICKNESS 100 MM
442NB 48.00 INCHES; THICKNESS 100 MM
443NB 54.00 INCHES; THICKNESS 100 MM
444NB 60.00 INCHES; THICKNESS 100 MM
445NB 66.00 INCHES; THICKNESS 100 MM
446NB 72.00 INCHES; THICKNESS 100 MM
447NB 78.00 INCHES; THICKNESS 100 MM
448NB 00.500 INCHES; THICKNESS 100 MM
449VALVE ASSEMBLIES
450NB00.75 INCHES; THICKNESS 100 MM
451NB01.00 INCHES; THICKNESS 100 MM
452NB01.50 INCHES; THICKNESS 100 MM
453NB02.00 INCHES; THICKNESS 100 MM
454NB03.00 INCHES; THICKNESS 100 MM
455NB04.00 INCHES; THICKNESS 100 MM
456NB06.00 INCHES; THICKNESS 100 MM
457NB08.00 INCHES; THICKNESS 100 MM
458NB10.00 INCHES; THICKNESS 100 MM
459NB12.00 INCHES; THICKNESS 100 MM
460NB14.00 INCHES; THICKNESS 100 MM
461NB16.00 INCHES; THICKNESS 100 MM
462NB20.00 INCHES; THICKNESS 100 MM
463NB24.00 INCHES; THICKNESS 100 MM
464NB30.00 INCHES; THICKNESS 100 MM
465NB36.00 INCHES; THICKNESS 100 MM
466NB 00.500 INCHES; THICKNESS 100 MM
467COLD INSULATION (UNITS): Providing thermal insulation including supply of all insulating and ancillary materials, Aluminium foil for SS surfaces, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required , including transportation of materials to work site, duly inspected by 3rd party inspector(Llyods/BV/DNV or any other Client approved party) at manufacturer's shop & sample check/inspection at site by EIL Construction inspector, applying insulation on surfaces as specified including all preparatory works there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with cladding as per spec., providing bolts, rivets, and self tapping screws wherever specified ,providing inspection windows, end seals for flanges etc., colour coding and identification. Providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of Engineer-in-charge. (Refer Legend for applicable EIL specification)
468INSULATION TYPE : IC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : POLY ISOCYANURATE(PIC)
469PIPES
470NB 00.50 INCHES; THICKNESS 25 MM
471NB 00.50 INCHES; THICKNESS 40 MM
472NB 00.50 INCHES; THICKNESS 50 MM
473NB 00.75 INCHES; THICKNESS 25 MM
474NB 00.75 INCHES; THICKNESS 40 MM
475NB 00.75 INCHES; THICKNESS 50 MM
476NB 00.75 INCHES; THICKNESS 65 MM
477NB 01.00 INCHES; THICKNESS 25 MM
478NB 01.50 INCHES; THICKNESS 25 MM
479NB 01.50 INCHES; THICKNESS 40 MM
480NB 01.50 INCHES; THICKNESS 50 MM
481NB 01.50 INCHES; THICKNESS 65 MM
482NB 02.00 INCHES; THICKNESS 40 MM
483NB 02.00 INCHES; THICKNESS 50 MM
484NB 02.00 INCHES; THICKNESS 65 MM
485NB 02.00 INCHES; THICKNESS 75 MM
486NB 03.00 INCHES; THICKNESS 40 MM
487NB 03.00 INCHES; THICKNESS 50 MM
488NB 03.00 INCHES; THICKNESS 65 MM
489NB 03.00 INCHES; THICKNESS 90 MM
490NB 04.00 INCHES; THICKNESS 40 MM
491NB 04.00 INCHES; THICKNESS 50 MM
492NB 04.00 INCHES; THICKNESS 90 MM
493NB 06.00 INCHES; THICKNESS 40 MM
494NB 06.00 INCHES; THICKNESS 50 MM
495NB 06.00 INCHES; THICKNESS 65 MM
496NB 06.00 INCHES; THICKNESS 75 MM
497NB 06.00 INCHES; THICKNESS 90 MM
498NB 08.00 INCHES; THICKNESS 40 MM
499NB 08.00 INCHES; THICKNESS 75 MM
500NB 10.00 INCHES; THICKNESS 40 MM
501NB 10.00 INCHES; THICKNESS 65 MM
502NB 10.00 INCHES; THICKNESS 90 MM
503NB 10.00 INCHES; THICKNESS 100 MM
504NB 12.00 INCHES; THICKNESS 40 MM
505NB 12.00 INCHES; THICKNESS 115 MM
506NB 14.00 INCHES; THICKNESS 40 MM
507NB 14.00 INCHES; THICKNESS 65 MM
508NB 14.00 INCHES; THICKNESS 75 MM
509NB 16.00 INCHES; THICKNESS 40 MM
510NB 16.00 INCHES; THICKNESS 65 MM
511NB 16.00 INCHES; THICKNESS 90 MM
512NB 18.00 INCHES; THICKNESS 40 MM
513NB 18.00 INCHES; THICKNESS 65 MM
514NB 18.00 INCHES; THICKNESS 90 MM
515NB 20.00 INCHES; THICKNESS 40 MM
516NB 20.00 INCHES; THICKNESS 65 MM
517NB 20.00 INCHES; THICKNESS 90 MM
518NB 24.00 INCHES; THICKNESS 40 MM
519NB 24.00 INCHES; THICKNESS 65 MM
520NB 24.00 INCHES; THICKNESS 90 MM
521NB 24.00 INCHES; THICKNESS 115 MM
522NB 26.00 INCHES; THICKNESS 40 MM
523NB 30.00 INCHES; THICKNESS 40 MM
524NB 48.00 INCHES; THICKNESS 40 MM
525FLANGE ASSEMBLIES
526NB 01.50 INCHES; THICKNESS 25 MM
527NB 01.50 INCHES; THICKNESS 40 MM
528NB 01.50 INCHES; THICKNESS 50 MM
529NB 01.50 INCHES; THICKNESS 65 MM
530NB 03.00 INCHES; THICKNESS 50 MM
531NB 04.00 INCHES; THICKNESS 40 MM
532NB 04.00 INCHES; THICKNESS 50 MM
533NB 04.00 INCHES; THICKNESS 90 MM
534NB 06.00 INCHES; THICKNESS 40 MM
535NB 06.00 INCHES; THICKNESS 50 MM
536NB 06.00 INCHES; THICKNESS 65 MM
537NB 06.00 INCHES; THICKNESS 75 MM
538NB 06.00 INCHES; THICKNESS 90 MM
539NB 08.00 INCHES; THICKNESS 40 MM
540NB 08.00 INCHES; THICKNESS 50 MM
541NB 08.00 INCHES; THICKNESS 75 MM
542NB 10.00 INCHES; THICKNESS 40 MM
543NB 10.00 INCHES; THICKNESS 90 MM
544NB 10.00 INCHES; THICKNESS 100 MM
545NB 12.00 INCHES; THICKNESS 40 MM
546NB 12.00 INCHES; THICKNESS 65 MM
547NB 12.00 INCHES; THICKNESS 90 MM
548NB 12.00 INCHES; THICKNESS 115 MM
549NB 14.00 INCHES; THICKNESS 40 MM
550NB 14.00 INCHES; THICKNESS 65 MM
551NB 14.00 INCHES; THICKNESS 75 MM
552NB 16.00 INCHES; THICKNESS 40 MM
553NB 16.00 INCHES; THICKNESS 65 MM
554NB 16.00 INCHES; THICKNESS 90 MM
555NB 18.00 INCHES; THICKNESS 40 MM
556NB 18.00 INCHES; THICKNESS 65 MM
557NB 18.00 INCHES; THICKNESS 90 MM
558NB 20.00 INCHES; THICKNESS 40 MM
559NB 20.00 INCHES; THICKNESS 65 MM
560NB 20.00 INCHES; THICKNESS 90 MM
561NB 24.00 INCHES; THICKNESS 40 MM
562NB 24.00 INCHES; THICKNESS 65 MM
563NB 24.00 INCHES; THICKNESS 90 MM
564NB 24.00 INCHES; THICKNESS 115 MM
565NB 26.00 INCHES; THICKNESS 40 MM
566NB 30.00 INCHES; THICKNESS 40 MM
567NB 48.00 INCHES; THICKNESS 40 MM
568BLIND FLANGE ASSEMBLIES
569NB 00.75 INCHES; THICKNESS 25 MM
570NB 00.75 INCHES; THICKNESS 40 MM
571NB 00.75 INCHES; THICKNESS 50 MM
572NB 00.75 INCHES; THICKNESS 65 MM
573NB 01.00 INCHES; THICKNESS 25 MM
574NB 02.00 INCHES; THICKNESS 40 MM
575NB 02.00 INCHES; THICKNESS 65 MM
576NB 02.00 INCHES; THICKNESS 75 MM
577NB 10.00 INCHES; THICKNESS 90 MM
578NB 12.00 INCHES; THICKNESS 40 MM
579VALVE ASSEMBLIES
580NB 00.50 INCHES; THICKNESS 25 MM
581NB 00.50 INCHES; THICKNESS 40 MM
582NB 00.50 INCHES; THICKNESS 50 MM
583NB 00.75 INCHES; THICKNESS 25 MM
584NB 00.75 INCHES; THICKNESS 40 MM
585NB 00.75 INCHES; THICKNESS 50 MM
586NB 00.75 INCHES; THICKNESS 65 MM
587NB 01.00 INCHES; THICKNESS 25 MM
588NB 01.50 INCHES; THICKNESS 25 MM
589NB 02.00 INCHES; THICKNESS 40 MM
590NB 02.00 INCHES; THICKNESS 50 MM
591NB 02.00 INCHES; THICKNESS 65 MM
592NB 02.00 INCHES; THICKNESS 75 MM
593NB 03.00 INCHES; THICKNESS 40 MM
594NB 03.00 INCHES; THICKNESS 65 MM
595NB 03.00 INCHES; THICKNESS 90 MM
596NB 04.00 INCHES; THICKNESS 40 MM
597NB 04.00 INCHES; THICKNESS 50 MM
598NB 04.00 INCHES; THICKNESS 90 MM
599NB 06.00 INCHES; THICKNESS 40 MM
600NB 06.00 INCHES; THICKNESS 50 MM
601NB 06.00 INCHES; THICKNESS 75 MM
602NB 06.00 INCHES; THICKNESS 90 MM
603NB 08.00 INCHES; THICKNESS 40 MM
604NB 08.00 INCHES; THICKNESS 75 MM
605NB 10.00 INCHES; THICKNESS 40 MM
606NB 10.00 INCHES; THICKNESS 65 MM
607NB 10.00 INCHES; THICKNESS 90 MM
608NB 10.00 INCHES; THICKNESS 100 MM
609NB 12.00 INCHES; THICKNESS 40 MM
610NB 12.00 INCHES; THICKNESS 115 MM
611NB 14.00 INCHES; THICKNESS 40 MM
612NB 14.00 INCHES; THICKNESS 65 MM
613NB 16.00 INCHES; THICKNESS 40 MM
614NB 16.00 INCHES; THICKNESS 65 MM
615NB 16.00 INCHES; THICKNESS 90 MM
616NB 18.00 INCHES; THICKNESS 40 MM
617NB 18.00 INCHES; THICKNESS 90 MM
618NB 20.00 INCHES; THICKNESS 40 MM
619NB 24.00 INCHES; THICKNESS 40 MM
620NB 24.00 INCHES; THICKNESS 65 MM
621NB 30.00 INCHES; THICKNESS 40 MM
622INSULATION TYPE : IC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : BELOW -45 (DEG C); INSULATION MATERIAL : POLY ISOCYANURATE(PIC)
623PIPES
624NB 00.75 INCHES; THICKNESS 100 MM
625NB 02.00 INCHES; THICKNESS 90 MM
626NB 16.00 INCHES; THICKNESS 140 MM
627BLIND FLANGE ASSEMBLIES
628NB 00.75 INCHES; THICKNESS 100 MM
629NB 02.00 INCHES; THICKNESS 90 MM
630VALVE ASSEMBLIES
631NB 00.75 INCHES; THICKNESS 100 MM
632NB 02.00 INCHES; THICKNESS 90 MM
633NB 03.00 INCHES; THICKNESS 100 MM
634INSULATION TYPE : IC; SURFACE MATERIAL : SS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : POLY ISOCYANURATE(PIC)
635PIPES
636NB 00.50 INCHES; THICKNESS 50 MM
637NB 00.75 INCHES; THICKNESS 25 MM
638NB 00.75 INCHES; THICKNESS 40 MM
639NB 00.75 INCHES; THICKNESS 50 MM
640NB 00.75 INCHES; THICKNESS 65 MM
641NB 01.00 INCHES; THICKNESS 25 MM
642NB 01.00 INCHES; THICKNESS 50 MM
643NB 01.50 INCHES; THICKNESS 65 MM
644NB 02.00 INCHES; THICKNESS 40 MM
645NB 02.00 INCHES; THICKNESS 65 MM
646NB 02.00 INCHES; THICKNESS 75 MM
647NB 03.00 INCHES; THICKNESS 65 MM
648NB 03.00 INCHES; THICKNESS 90 MM
649NB 04.00 INCHES; THICKNESS 40 MM
650NB 04.00 INCHES; THICKNESS 65 MM
651NB 06.00 INCHES; THICKNESS 75 MM
652NB 06.00 INCHES; THICKNESS 90 MM
653NB 08.00 INCHES; THICKNESS 65 MM
654NB 08.00 INCHES; THICKNESS 75 MM
655NB 10.00 INCHES; THICKNESS 90 MM
656NB 12.00 INCHES; THICKNESS 115 MM
657NB 14.00 INCHES; THICKNESS 65 MM
658NB 16.00 INCHES; THICKNESS 65 MM
659NB 16.00 INCHES; THICKNESS 90 MM
660NB 18.00 INCHES; THICKNESS 40 MM
661NB 18.00 INCHES; THICKNESS 90 MM
662NB 20.00 INCHES; THICKNESS 40 MM
663NB 24.00 INCHES; THICKNESS 40 MM
664NB 24.00 INCHES; THICKNESS 65 MM
665FLANGE ASSEMBLIES
666NB 01.00 INCHES; THICKNESS 25 MM
667NB 01.50 INCHES; THICKNESS 65 MM
668NB 03.00 INCHES; THICKNESS 90 MM
669NB 04.00 INCHES; THICKNESS 40 MM
670NB 04.00 INCHES; THICKNESS 65 MM
671NB 06.00 INCHES; THICKNESS 65 MM
672NB 06.00 INCHES; THICKNESS 75 MM
673NB 06.00 INCHES; THICKNESS 90 MM
674NB 08.00 INCHES; THICKNESS 65 MM
675NB 08.00 INCHES; THICKNESS 75 MM
676NB 10.00 INCHES; THICKNESS 90 MM
677NB 12.00 INCHES; THICKNESS 115 MM
678NB 14.00 INCHES; THICKNESS 65 MM
679NB 16.00 INCHES; THICKNESS 65 MM
680NB 16.00 INCHES; THICKNESS 90 MM
681NB 18.00 INCHES; THICKNESS 40 MM
682NB 18.00 INCHES; THICKNESS 90 MM
683NB 20.00 INCHES; THICKNESS 40 MM
684NB 24.00 INCHES; THICKNESS 40 MM
685NB 24.00 INCHES; THICKNESS 65 MM
686BLIND FLANGE ASSEMBLIES
687NB 00.75 INCHES; THICKNESS 25 MM
688NB 00.75 INCHES; THICKNESS 40 MM
689NB 00.75 INCHES; THICKNESS 50 MM
690NB 00.75 INCHES; THICKNESS 65 MM
691NB 02.00 INCHES; THICKNESS 65 MM
692VALVE ASSEMBLIES
693NB 00.50 INCHES; THICKNESS 50 MM
694NB 00.75 INCHES; THICKNESS 25 MM
695NB 00.75 INCHES; THICKNESS 40 MM
696NB 00.75 INCHES; THICKNESS 50 MM
697NB 00.75 INCHES; THICKNESS 65 MM
698NB 01.00 INCHES; THICKNESS 50 MM
699NB 01.50 INCHES; THICKNESS 65 MM
700NB 02.00 INCHES; THICKNESS 40 MM
701NB 02.00 INCHES; THICKNESS 65 MM
702NB 02.00 INCHES; THICKNESS 75 MM
703NB 03.00 INCHES; THICKNESS 65 MM
704NB 03.00 INCHES; THICKNESS 90 MM
705NB 04.00 INCHES; THICKNESS 40 MM
706NB 04.00 INCHES; THICKNESS 65 MM
707NB 06.00 INCHES; THICKNESS 75 MM
708NB 08.00 INCHES; THICKNESS 65 MM
709NB 08.00 INCHES; THICKNESS 75 MM
710NB 12.00 INCHES; THICKNESS 115 MM
711NB 14.00 INCHES; THICKNESS 65 MM
712NB 16.00 INCHES; THICKNESS 65 MM
713NB 16.00 INCHES; THICKNESS 90 MM
714NB 18.00 INCHES; THICKNESS 40 MM
715NB 18.00 INCHES; THICKNESS 90 MM
716NB 20.00 INCHES; THICKNESS 40 MM
717NB 24.00 INCHES; THICKNESS 40 MM
718NB 24.00 INCHES; THICKNESS 65 MM
719INSULATION TYPE : IC; SURFACE MATERIAL : SS; OPERATING TEMP. RANGE : BELOW -45 (DEG C); INSULATION MATERIAL : POLY ISOCYANURATE(PIC)
720PIPES
721NB 00.50 INCHES; THICKNESS 65 MM
722NB 00.50 INCHES; THICKNESS 75 MM
723NB 00.50 INCHES; THICKNESS 90 MM
724NB 00.75 INCHES; THICKNESS 65 MM
725NB 00.75 INCHES; THICKNESS 75 MM
726NB 00.75 INCHES; THICKNESS 90 MM
727NB 00.75 INCHES; THICKNESS 100 MM
728NB 01.00 INCHES; THICKNESS 90 MM
729NB 01.00 INCHES; THICKNESS 115 MM
730NB 01.50 INCHES; THICKNESS 75 MM
731NB 01.50 INCHES; THICKNESS 90 MM
732NB 01.50 INCHES; THICKNESS 115 MM
733NB 02.00 INCHES; THICKNESS 90 MM
734NB 02.00 INCHES; THICKNESS 115 MM
735NB 02.00 INCHES; THICKNESS 125 MM
736NB 03.00 INCHES; THICKNESS 90 MM
737NB 03.00 INCHES; THICKNESS 100 MM
738NB 03.00 INCHES; THICKNESS 115 MM
739NB 03.00 INCHES; THICKNESS 125 MM
740NB 03.00 INCHES; THICKNESS 140 MM
741NB 04.00 INCHES; THICKNESS 100 MM
742NB 04.00 INCHES; THICKNESS 115 MM
743NB 06.00 INCHES; THICKNESS 115 MM
744NB 06.00 INCHES; THICKNESS 125 MM
745NB 06.00 INCHES; THICKNESS 165 MM
746NB 08.00 INCHES; THICKNESS 115 MM
747NB 08.00 INCHES; THICKNESS 125 MM
748NB 08.00 INCHES; THICKNESS 140 MM
749NB 08.00 INCHES; THICKNESS 175 MM
750NB 10.00 INCHES; THICKNESS 140 MM
751NB 12.00 INCHES; THICKNESS 125 MM
752NB 12.00 INCHES; THICKNESS 165 MM
753NB 12.00 INCHES; THICKNESS 190 MM
754FLANGE ASSEMBLIES
755NB 01.00 INCHES; THICKNESS 115 MM
756NB 01.50 INCHES; THICKNESS 75 MM
757NB 01.50 INCHES; THICKNESS 115 MM
758NB 02.00 INCHES; THICKNESS 115 MM
759NB 03.00 INCHES; THICKNESS 115 MM
760NB 03.00 INCHES; THICKNESS 125 MM
761NB 04.00 INCHES; THICKNESS 100 MM
762NB 04.00 INCHES; THICKNESS 115 MM
763NB 04.00 INCHES; THICKNESS 150 MM
764NB 06.00 INCHES; THICKNESS 115 MM
765NB 06.00 INCHES; THICKNESS 125 MM
766NB 06.00 INCHES; THICKNESS 165 MM
767NB 08.00 INCHES; THICKNESS 115 MM
768NB 08.00 INCHES; THICKNESS 125 MM
769NB 08.00 INCHES; THICKNESS 140 MM
770NB 08.00 INCHES; THICKNESS 175 MM
771NB 10.00 INCHES; THICKNESS 140 MM
772NB 12.00 INCHES; THICKNESS 125 MM
773NB 12.00 INCHES; THICKNESS 165 MM
774NB 12.00 INCHES; THICKNESS 190 MM
775NB 16.00 INCHES; THICKNESS 140 MM
776BLIND FLANGE ASSEMBLIES
777NB 00.75 INCHES; THICKNESS 65 MM
778NB 00.75 INCHES; THICKNESS 75 MM
779NB 00.75 INCHES; THICKNESS 90 MM
780NB 00.75 INCHES; THICKNESS 100 MM
781NB 01.00 INCHES; THICKNESS 90 MM
782NB 02.00 INCHES; THICKNESS 90 MM
783NB 02.00 INCHES; THICKNESS 125 MM
784VALVE ASSEMBLIES
785NB 00.50 INCHES; THICKNESS 65 MM
786NB 00.50 INCHES; THICKNESS 75 MM
787NB 00.50 INCHES; THICKNESS 90 MM
788NB 00.75 INCHES; THICKNESS 65 MM
789NB 00.75 INCHES; THICKNESS 75 MM
790NB 00.75 INCHES; THICKNESS 90 MM
791NB 00.75 INCHES; THICKNESS 100 MM
792NB 01.00 INCHES; THICKNESS 90 MM
793NB 01.50 INCHES; THICKNESS 90 MM
794NB 01.50 INCHES; THICKNESS 115 MM
795NB 02.00 INCHES; THICKNESS 90 MM
796NB 02.00 INCHES; THICKNESS 115 MM
797NB 02.00 INCHES; THICKNESS 125 MM
798NB 03.00 INCHES; THICKNESS 90 MM
799NB 03.00 INCHES; THICKNESS 100 MM
800NB 03.00 INCHES; THICKNESS 125 MM
801NB 03.00 INCHES; THICKNESS 140 MM
802NB 04.00 INCHES; THICKNESS 100 MM
803NB 04.00 INCHES; THICKNESS 115 MM
804NB 06.00 INCHES; THICKNESS 115 MM
805NB 06.00 INCHES; THICKNESS 125 MM
806NB 06.00 INCHES; THICKNESS 165 MM
807NB 08.00 INCHES; THICKNESS 125 MM
808NB 10.00 INCHES; THICKNESS 140 MM
809NB 12.00 INCHES; THICKNESS 125 MM
810NB 12.00 INCHES; THICKNESS 190 MM
811INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO 45 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
812PIPES
813NB 01.00 INCHES; THICKNESS 125 MM(COLD INS THK. 25 MM + ACCOUSTIC INS. THK. 100 MM)
814NB 01.500 INCHES; THICKNESS 125 MM(COLD INS THK. 25 MM + ACCOUSTIC INS. THK. 100 MM)
815NB 02.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
816NB 03.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
817NB 04.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
818NB 06.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
819NB 10.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
820NB 14.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
821NB20.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
822FLANGE ASSEMBLIES
823NB04.000 INCHES; THICKNESS 140 MM(COLD INS THK.40 MM + ACCOUSTIC INS. THK. 100 MM)
824NB20.000 INCHES; THICKNESS 140 MM(COLD INS THK.40 MM + ACCOUSTIC INS. THK. 100 MM)
825VALVES
826NB01.000 INCHES; THICKNESS 125 MM(COLD INS THK. 25 MM + ACCOUSTIC INS. THK. 100 MM)
827NB02.000 INCHES; THICKNESS 125 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
828NB06.000 INCHES; THICKNESS 125 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
829NB08.000 INCHES; THICKNESS 125 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
830NB14.000 INCHES; THICKNESS 125 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
831INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -26 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
832PIPES
833NB02.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
834NB08.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
835NB10.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
836FLANGE ASSEMBLIES
837NB02.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
838NB06.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
839NB10.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
840VALVE ASSEMBLIES
841NB02.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
842NB08.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
843NB10.000 INCHES; THICKNESS 130 MM(COLD INS THK. 30 MM + ACCOUSTIC INS. THK. 100 MM)
844INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -63 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
845PIPES
846NB01.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
847NB02.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
848NB04.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
849NB06.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
850NB08.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
851NB10.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
852NB12.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
853FLANGE ASSEMBLIES
854NB01.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
855NB02.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
856NB06.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
857NB08.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
858NB10.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
859VALVE ASSEMBLIES
860NB02.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
861NB04.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
862NB08.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
863NB12.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
864INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -75 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
865PIPES
866NB07.500 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
867NB02.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
868NB04.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
869NB06.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
870FLANGE ASSEMBLIES
871NB07.500 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
872NB02.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
873NB03.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
874VALVE ASSEMBLIES
875NB02.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
876NB04.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
877NB06.000 INCHES; THICKNESS 140 MM(COLD INS THK. 40 MM + ACCOUSTIC INS. THK. 100 MM)
878INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -75 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
879PIPES
880NB08.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
881NB10.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
882FLANGE ASSEMBLIES
883NB10.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
884VALVE ASSEMBLIES
885NB10.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
886INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -101 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
887PIPES
888NB07.500 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
889NB01.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
890NB01.500 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
891NB02.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
892NB03.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
893NB04.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
894FLANGE ASSEMBLIES
895NB07.500 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
896NB01.500 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
897NB03.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
898VALVE ASSEMBLIES
899NB02.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
900NB03.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
901NB04.000 INCHES; THICKNESS 150 MM(COLD INS THK. 50 MM + ACCOUSTIC INS. THK. 100 MM)
902INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -101 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
903PIPES
904NB12.000 INCHES; THICKNESS 175 MM(COLD INS THK. 75 MM + ACCOUSTIC INS. THK. 100 MM)
905FLANGE ASSEMBLIES
906NB12.000 INCHES; THICKNESS 175 MM(COLD INS THK. 75 MM + ACCOUSTIC INS. THK. 100 MM)
907VALVE ASSEMBLIES
908NB12.000 INCHES; THICKNESS 175 MM(COLD INS THK. 75 MM + ACCOUSTIC INS. THK. 100 MM)
909INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -23 (DEG C); INSULATION MATERIAL :COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
910PIPES
911NB36.000 INCHES; COLD INSULATION & ACCOUSTIC INSULATION THICKNESS & MATERIAL :COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY. THICKNESS OF COLD AND ACCOUSTIC INSULATION SHALL BE AS PER AMMENDMENT . IN CASE OF DESCREPANCY AMMENDMENT REQUIREMENT SHALL BE FINAL.
912FLANGE ASSEMBLIES
913NB36.000 INCHES; COLD INSULATION & ACCOUSTIC INSULATION THICKNESS & MATERIAL:COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY. THICKNESS OF COLD AND ACCOUSTIC INSULATION SHALL BE AS PER AMMENDMENT . IN CASE OF DESCREPANCY AMMENDMENT REQUIREMENT SHALL BE FINAL.
914INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -35.4 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY.
915PIPES
916NB42.000 INCHES; COLD INSULATION & ACCOUSTIC INSULATION THICKNESS & MATERIAL :COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY. THICKNESS OF COLD AND ACCOUSTIC INSULATION SHALL BE AS PER AMMENDMENT . IN CASE OF DESCREPANCY AMMENDMENT REQUIREMENT SHALL BE FINAL.
917FLANGE ASSEMBLIES
918NB42.000 INCHES; COLD INSULATION & ACCOUSTIC INSULATION THICKNESS & MATERIAL:COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY. THICKNESS OF COLD AND ACCOUSTIC INSULATION SHALL BE AS PER AMMENDMENT . IN CASE OF DESCREPANCY AMMENDMENT REQUIREMENT SHALL BE FINAL.
919INSULATION TYPE : R(V); ACCOUSTIC INSULATION FOR COLD SERVICE : SURFACE MATERIAL : CS & SS; OPERATING TEMP. RANGE : UPTO -1.0 (DEG C); INSULATION MATERIAL : COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY. THICKNESS OF COLD AND ACCOUSTIC INSULATION SHALL BE AS PER AMMENDMENT . IN CASE OF DESCREPANCY AMMENDMENT REQUIREMENT SHALL BE FINAL.
920NB30.000 INCHES; COLD INSULATION & ACCOUSTIC INSULATION THICKNESS & MATERIAL:COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY. THICKNESS OF COLD AND ACCOUSTIC INSULATION SHALL BE AS PER AMMENDMENT . IN CASE OF DESCREPANCY AMMENDMENT REQUIREMENT SHALL BE FINAL.
921FLANGE ASSEMBLIES
922NB30.000 INCHES; COLD INSULATION & ACCOUSTIC INSULATION THICKNESS AND MATERIAL: COLD INSULATION MATERIAL SHALL BE POLY ISOCYANURATE (PIC) AS PER 6-79-0027 & ACCOUSTIC INSULATION MATERIAL SHALL BE AS PER 6-79-0022 & ADDENDUM / AMMENDMENT ,IF ANY. THICKNESS OF COLD AND ACCOUSTIC INSULATION SHALL BE AS PER AMMENDMENT . IN CASE OF DESCREPANCY AMMENDMENT REQUIREMENT SHALL BE FINAL.
923EQUIPMENT INSULATION
924COLD INSULATION:Providing cold insulation including supply of all insulating and anciliary material, protective covering, consumables and other necessary materials, testing of the material as required including transportation of the materials to work sites, applying insulation on surfaces as specified, including all preparatory works thereon, all binding, tying, lacing, stitching and/or otherwise securing, providing vapour barrier, finishing with plain/corrugated sheet cladding or as specified, providing bolts, rivets, self tapping screws wherever specified, providing inspection windows etc. arranging necessary scaffolding, all tools and tackles, equipment, apparatus etc. labour and supervision and completing the work in all respect at all heights as per drawings, specifications and instructions of Engineer-in-Charge.
925Shells & heads of vertical vessels, columns, exchangers, reactors, silencers etc. Surface material: CS/AS. Insulation type: Ic (Polyurethane Polyisocyanurate).
926Insulation Thickness: 165mm
927Insulation Thickness: 40mm
928Insulation Thickness: 65mm
929Insulation Thickness: 100mm
930Insulation Thickness: 125mm
931Shells & heads of vertical vessels, columns, exchangers, reactors, silencers etc. Surface material: SS. Insulation type: Ic (Polyurethane Polyisocyanurate).
932Insulation Thickness: 140mm
933Insulation Thickness: 165mm
934Insulation Thickness: 215mm
935Shells & heads of horizontal vessels, columns, reactors, exchangers, silencers etc. and heads of above mentioned vertical equipments. Surface material: CS/AS. Insulation type: Ic (Polyurethane Polyisocyanurate).
936Insulation Thickness: 40mm
937Insulation Thickness: 125mm
938Shells & heads of horizontal vessels, columns, reactors, exchangers, silencers etc and heads of above mentioned vertical equipments. Surface material: SS. Insulation type: Ic (Polyurethane Polyisocyanurate).
939Insulation Thickness: 100mm
940Insulation Thickness: 125mm
941Insulation Thickness: 215mm
942EQUIPMENT INSULATION
943HOT INSULATION:Providing thermal insulation including supply of all insulating and ancillary material, weather protective covering, consumables and other necessary materials, testing of the material as required including transportation of the materials to work sites, applying insulation on surfaces as specified, including all preparatory works thereon, all binding, tying, lacing, stitching and/or otherwise securing, providing vapour barrier, finishing with plain/corrugated sheet cladding or as specified, providing bolts, rivets, self tapping screws wherever specified, providing inspection windows etc., arranging necessary scaffolding, all tools and tackles, equipment, apparatus etc., labour and supervision and completing the work in all respect at all heights as per drawings, specifications and instructions of Engineer-in-Charge.
944Shells of vertical vessels, columns, exchangers, reactors, silencers etc. Surface material: CS/AS. Insulation type : IH &IT (Rockwool).
945Insulation Thickness: 25 mm
946Insulation Thickness: 40 mm
947Insulation Thickness: 50mm
948Insulation Thickness: 75mm
949Insulation Thickness: 165mm
950Shells and heads of horizontal vessels, columns, reactors, exchangers, silencers etc and heads of above mentioned vertical equipments. Surface material CS/AS. Insulation type: IH &IT (Rockwool).
951Insulation Thickness: 25 mm
952Insulation Thickness: 40mm
953Insulation Thickness: 50mm
954Insulation Thickness: 65mm
955Insulation Thickness: 75mm
956Insulation Thickness: 115mm
957Shells and heads of horizontal vessels, columns, reactors, exchangers, silencers etc and heads of above mentioned vertical equipments. Surface material SS. Insulation type: IH &IT (Rockwool).
958Insulation Thickness: 40mm
959Shells and heads of horizontal vessels, columns, reactors, exchangers, silencers etc and heads of above mentioned vertical equipments. Surface material: CS/AS. Insulation type: IS(Material Rockwool)
960Insulation Thickness: 25mm
961Insulation Thickness: 40mm
962Insulation Thickness: 50mm
963NOTE:-
964The Schedule of Quantities & Rates shall be read with other all sections of this Bidding Documents.
965The Contractor is deemed to have studied the drawings, specifications and details of works to be done within the Time Schedule and should have acquainted himself of the conditions prevailing at site.
966No claim shall be entertained during currency of this Contract towards any items due to above including where the Contractor has quoted low/high rates.
967Owner reserves the right to interpolate or extrapolate the rates for any new items of work not covered in Schedule of Quantities & Rates from the similar item already available in schedule of quantities and rates. All the works shall be measured upon completion and paid for at the rate quoted and accepted in the “Schedule of Quantities & Rates”. In case any activity through specifically not covered in schedule of quantities & rates descriptions but the same is covered s under scope of work / scope of supply/specification/drawings etc. No extra claim on this account shall be entertained, since Schedule of quantities & Rates is to be read in conjunction with all other documents forming part of the Contract.
968All items of work mentioned in SOQR shall be carried out as per the specifications, drawings and instructions of Owner and the rates are deemed to be inclusive of labour, supervision, tools & tackles, equipment’s & machineries wherever required as called for in the detail specification and conditions of the Contract.
969Owner / Consultant reserves the right to cancel / delete / curtain any item or group of work if necessary. Such a step shall not be construed as reason for changing the rates.
970The SOQR rates are deemed to be inclusive of all taxes & duties except GST (GST should be mentioned sperately)
971Bidder shall indicate the ONE SINGLE PERCENTAGE on total intended value/Price in the “Summary of Prices” sheet. Bidder shall not change rate/amount indicated in “Schedule of Quantities & Rates”
972Bidder shall furnish the details as requested below along with this preamble to Schedule of Quantities & Rates, to be submitted along with their price offer Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56993830
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 10.58 Crore
LAST DATE 02-09-2026
Authority
Authority Name Bridge And Roof Company India Limited
Work Description Tender for Works Contract For Carrying Out Supply And Application Of Hot & Cold Insulation Works On Equipment, Vessels, Exchangers, Piping, Etc. On Sub-Contract Basis In Connection With Composite Works For Pdh Unit For Gail Usar Pdh-Pp Project At Usar, Alibag, Dist. Raigad, Maharashtra
Basic Detail
Tender No BANDR/HO/71147/INSULATION WORK/NIT/SC/01
Bidding Type Tender
Location
City Raigad
State Maharashtra
Key Dates
Publish Date 13 Aug 2026
Submission Date 02 Sep 2026
Open Date 03 Sep 2026
Finance
Tender Value 10.58 Crore
Tender Fee 16284
EMD 12.90 Lakhs
Exemption Not Available
Document List
38803101-8cac-4860-a6bf-2d72ac45eaac.html
BOQ_968896.xls
eNIT_INSULATION_WORK_7114_1.pdf
Tech_Specs_01.rar
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Sep 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

38803101-8cac-4860-a6bf-2d72ac45eaac.html

xls

BOQ_968896.xls

pdf

eNIT_INSULATION_WORK_7114_1.pdf

rar

Tech_Specs_01.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders