Tender For Construction Of Ministrial Staff Quaters (4Nos)At Rccf Forest Colony, Angul During 2026-27
Tender Value
43.26 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
10 days left
EMD
43260
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ministrial Staff Quaters (4Nos)At Rccf Forest Colony, Angul During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of Foundation in hard soil, Levelling foundation trench etc complete including cost of labour, Labour cess, T&P materials etc. complete and as per the direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with excavated materials, well watered and rammed with taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 3 | Filling foundation and plinth with clean course sand, well watered and rammed with cost, conveyance, royalty and taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 4 | Cement Concrete (1:3:6 ) using 40 mm size hard black granite crusher broken metals with cost conveyance, taxes of all materials and labour etc. complete as per direction of Engineer-in-charge |
| 5 | Fly Ash Brick Masonry in C.M. (1:6) foundation and plinth using bricks of 25cm x 11cm x 8 cm size having crushing strength not less than 75kg/Cm2 with dimensional tolerance + 8% with cost conveyance ,royality, taxes of all materials etc. complete etc.complete and as per the direction of the Engineer-in-charge. |
| 6 | Fly ash Brick masonary in C.M. (1:6) in super structure using bricks of 25cm x 11cm x 8 cm size having crushing strength not less than 75kg/Cm2 with dimensional tolerance +8% with cost conveyance ,royality, taxes of all materials etc. complete. |
| 7 | Providing cement concrete of grade M-20 using 20 mm down graded size hard granite crusher broken chips and sharp sand of approved quality from approved quarry, mixing, hoisting, lowering, laying, compacting and curing for specified days with cost, carriage, royality and taxes of all materials and cost of all labour, T&P, workers welfare cess etc complete and as per direction of the Engineer-in-charge. |
| 8 | Supplying, fitting & placing uncoated HYSD bar reinforcement (inclusive of over lap & wastage) for R.C.C. work including cutting, bending, binding and tying the grills and placing in correct position including cost, conveyance, taxes of HYSD bars & binding wire of 18 to 20 gauge with cost of all labour, T&P, workers welfare cess etc complete as per approved specification and direction of the Engineer -in- Charge. |
| 9 | Rigid smooth centering & shuttering for plain C.C / R.C.C. works including removing the same after specified days of casting with cost of all labour, T&P, nail, workers welfare cess etc. complete as per approved specification and direction of the Engineer-in- Charge |
| 10 | R.C.C. Column base |
| 11 | R.C.C. Column |
| 12 | Plinth Beam |
| 13 | R.C.C. Lintel |
| 14 | Roof Beam |
| 15 | R.C.C. Roof Slab |
| 16 | R.C.C. Roof Chujja |
| 17 | RCC Stair case |
| 18 | Fly Ash Dry Brick Masonry foundation and plinth using bricks of 25cm x 11cm x 8 cm size having crushing strength not less than 75kg/Cm2 with dimensional tolerance + 8% with cost conveyance ,royality, taxes of all materials etc. complete etc.complete and as per the direction of the Engineer-in-charge. |
| 19 | 16 mm. thick Cement plaster (1:6 ) over brick work with cost conveyance, royality taxes of all materials, etc as per direction of the Engineer - in- Charge. |
| 20 | 12 mm. thick Cement plaster (1:6 ) over brick work finished smooth with cost conveyance, royality taxes of all materials, etc as per direction of the Engineer - in- Charge. |
| 21 | 12 mm thick cement plaster in Cement Mortar (1:4) with cement punning over brick work after racking the joints and cleaning the surface including watering and curing for specified days with cost, conveyance, royalty, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 22 | Supplying, fitting and fixing of Terracotta jally in the wall etc complete as per approved design and specification with cost convenance, taxes of all materials, labour T&P etc. required for the complete in all respect including workers welfafe cess as per direction of the Engineer- in- charge. |
| 23 | Supplying and fixing W.I.Clamps 25 cm to 30 cm long of 35mm x 5mm size for doors, windows, and ventilators including fixing in cement concrete ( 1:3:6) with 12mm to 20mm hard stone chips or cement mortar (1:3) including cost of all materials as per approved specification |
| 24 | 125mmx75mm size WPC wood work framed and fixed ( wrought and put up ) in choukath of doors and windows and ventilators with cost, conveyance, taxes of all materials and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 25 | Supplying, fitting, fixing up window (siding type) made up Al section 9778 as window frame section No. 4095,4096 and 9777, 3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including all fitting etc. complete. As per the direction of the Engineer in - charge. |
| 26 | Supplying ,fitting and fixing Vetrified Tiles in in flooors of size 1200mm X 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar ( 1:4 ) and filling joints with white cement of approved quality including cost of all materials, labour , T & P etc. required for the work all complete as per approved specification and direction of Engineer-in-Charge. |
| 27 | Fixing Kajaria/orient/Cera glazed tiles of special plan / printed series seramic wall tiles of premium grade having thickness 7mm to 8mm conforming to I.S 13755 of for walls on 12mm thick cement plaster (1:3 ) jointed with neat cement slurry mixed with pigment etc. complete as per approved specification and direction of Engineer-in-Charge. |
| 28 | Supplying ,fitting and fixing granite Tiles in in flooors of size 0.1sqm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar ( 1:4 ) and filling joints with white cement of approved quality including cost of all materials, labour , T & P etc. required for the work all complete as per approved specification and direction of Engineer-in-Charge. |
| 29 | Supplying ,hoisting fitting and fixing of G.I. joist & post & placing in position etc complete as per approved design and specification with cost convenance, taxes of all materials, labour T&P etc. required for the complete in all respect including workers welfafe cess as per direction of the Engineer- in- charge. |
| 30 | Roofing, fixing of TATA sheet 0.047mm in Roof drilling hole in wind ties including fixing of ridges valleys rind ties etc including cost convenance, taxes of all materials, labour T&P etc. required for the complete in all respect including workers welfare cess as per direction of the Engineer- in- charge. |
| 31 | Painting wall surface with Burger/Ashian paint Primer of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per direction of the Engineer - in- Charge. |
| 32 | Finishing wall with water proofing Burger/Ashian paint weather coat paint of approved shade on new works two coats to give an even shade excluding cost of paint and cost of all labour, T&P, workers welfare cess etc. complete as per approved specification and direction of the Engineer -in- Charge. |
| 33 | Electricals Portion |
| 34 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )) |
| 35 | Supplying and fixing of metal box of 132 mm x 100 mm x 52 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5 / 6 amps socket outlet and 5 / 6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )) including all accessories & connection etc. complete as per direction of Engineer-in-charge. |
| 36 | Supplying and fixing of metal box of 135 mm x 79 mm x 52 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin15 amps socket outlet and 15 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) including all accessories & connection etc. complete as per direction of Engineer-in-charge. |
| 37 | Recessed wiring to submain in 2 x 1.5 sq. mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /L&T /Anchor /Havels /V Guard) including all accessories & connection etc. complete as per direction of Engineer-in-charge. |
| 38 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) including all accessories & connection etc. complete as per direction of Engineer-in-charge. |
| 39 | Supply and fixing of single pole 4-way MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) 4 and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) 4 including all accessories & connection etc. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )) complete as per direction of Engineer-in-charge.(S/F of 2 nos (10 Amps) MCB for 4way BDB) |
| 40 | Supplying & fixing of superior type Batten holder Havell/Cona/Anchor Angle holder electrical accessories of approved quality ( I.S.I. marked) and make (Anchor) with all accessories & connection etc. complete as per direction of E.I.C. |
| 41 | 40mm dia GI bracket for service connection including cost of GI pipe & labour charges for making holes as per required size & making good to it complete Including cost ,transportation & taxes of all materials,T&P required for the work with all accessories & connection etc. complete as per direction of E.I.C. |
| 42 | Supplying Havells /Anchor 4mm service wire including cost ,transportation & taxes of all materials,T&P required for the work with all accessories & connection etc. complete as per direction of E.I.C. |
| 43 | Supply, Installation, Testing, and Commissioning of Pannel Board32 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting in metal box,Porceilin kitkat,MCB, Change over switch and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge. Make - SEIMENS/ HPL/ ANCHOR/ L&T/ HAVELS/Crompton |
| 44 | S/F of standard earthing confirming to IS-3043/1987 including supply & fixing of 38mm or 10mm dia heavy duty G.I. pipe 3mtr long confirming to IS-1239 part-1/1990 the pipe shall have 12mm dia perforated holes at 15cm interval c/c upto 2mt height from the bottom, upper & threaded & fitted with 38mm/40mm dia GI flange with provision of hole for making connection of earth continuity wire with excavation of Pit of size 0.75mtx0.75mtx3.0mt, masonary works,an alternate layer of 105mm charcoal,50mm salt, & S/F of C.I. hinged top cover;plastering & laying the wire as earth continuity conductor from main switch to earth electrol both end of earth wire should be provided with copper cable socket duly soldered & fixed by GI nut & bolt with all accessories & connection etc. complete as per direction of E.I.C. |
| 45 | Sanitary fittings |
| 46 | Labour for laying Ashirbad/Oriplast PVC pipes 20mm dia confirming to IS:4985 of class iv (10kg/cm) of the following nominal bore and pipe fittings including testing as per specification complete.(20 mm dia. Pipe) |
| 47 | Laying in trenches centrifugally Ashirbad/Oriplast PVC pressure pipes 110mm dia confirming to IS:4985 of class iv (10kg/cm) of the following nominal bore and pipe fittings including testing as per specification complete.(110 mm dia. Pipe) |
| 48 | Labour for laying Ashirbad/Oriplast PVC pipes 32mm dia confirming to IS:4985 of class iv (10kg/cm) of the following nominal bore and pipe fittings including testing as per specification complete.(32 mm dia. Pipe) etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 49 | Cutting holes RCC floors and roofs up to 19cm thick for passing GI/PVC pipe and fitting etc. and repairing the holes after insertion of pipe with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per specification |
| 50 | Cutting holes through existing brick work & making good after passing the pipein cement mortar(1:4) complete as per specification.(250mm thick wall) finishing complete so as to make it leak proof as per specification |
| 51 | Fixing Ashirbad/oriplast PVC floor traps of 100mm dia of outlet,of self-cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors as per specificaton etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 52 | Providing Cement Joints with sand Cast Iron spigot and socket and cement etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 53 | Supplying, fitting, fixing of CERA/HINDWARE water closet (Cumod) 21\\" size(53x43x18cm) deep with internal S.W. P trap to the floor with wooden plug & cromium plated screws including jointing the trap with soil pipe in Cement (1:1) etc Complete etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 54 | Fixing 12.5 litres capacity CERA/HINDWARE low level flushing cistern with a pair of cast iron or m.s brackets with fitting such of siphonic arrangement 15mm nominal size brass /P.V.C ball valve with polythene float chromium plated brass handle unions coup lings for connection with inlet, outlet and overflow pipe 40mm dia. porcelain enamelled flush bend 12mm dia P.V.C inlet connection pipe including cutting holes and making good the same and connecting the flush bend with elsterl and closet connecting the inlet pipe with supply main etc all complete as per specification complete. |
| 55 | Fixing CERA/HINDWARE wash basins 50\\"\\"x19\\"x7\\" with hole for pillar tapes with Padastral,cast iron or m.s. brackets painted wite including cutting holes in walls and making good the damages etc all complete as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 56 | Fixing of Brass screw down JAQUER/Plumber Health Faucet with Holder, Pipe polished bright of the following nominal size as per specification complete etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 57 | Fixing of Brass screw down JAQUER/Plumber long body bib cocks (Taps) polished bright of the following nominal size as per specification complete etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 58 | Fixing of Brass screw down JAQUER/Plumber Short body bib cocks (Taps) polished bright of the following nominal size as per specification complete etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 59 | Fixing of brass screw down JAQUER/Plumber pillar cocks of the following sizes as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 60 | Fixing of brass screw down JAQUER/Plumber concilled stop cocks of the following sizes as per specification complete etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 61 | FixingJAQUER/Plumber 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screw and washers complete as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 62 | Fixing standard size chromium plated brass towel rail JAQUER/Plumber complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws complete as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 63 | Fixing standard size glass self JAQUER/Plumber with chromium plated brass screws with guard kails fixed to wooden plugs with chromium plated brass screws complete as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 64 | Supplying, fitting, fixing of standard size Stainless steel sink of size (24\\"x18'x10\\") for Kitchen etc. Complete.as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 65 | Fixing of JAQUER/Plumber Brass, Gum metal full way valve (32mm) of the following nominal size with as per specification complete as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 66 | Fixing 12mm dia Ashirbad/Oriplast PVC inlet connection pipe & making connection with pillar cocks & supply mins for wash basin complete as per specification etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC. |
| 67 | Fixing Ashirbad/Oriplast PVC waste pipe 32mm dia for basin including confirming to IS: 1538(part-ix) of the following nominal diameter as per specification complete etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 68 | Laying in trenches double socket Ashirbad/Oriplast PVC bends confirming to IS: 1538(part-ix) of the following nominal diameter as per specification complete etc. with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC |
| 69 | Supplying, Fixing Sintex/Ashirbad 3 layer Overhead Tank 1500Lt capacity as per specification complete etc.including 5\\"Brick work in CM(1:6) around tank with cost, conveyance, taxes of all materials and cost of all labour, T&P, brushes, workers welfare cess etc. complete as per approved specification and direction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender