Tender For E8 Tender Id-2026_Mes_Name Of Work: Addition / Alteration To Kitchen Cupboards/Wardrobes At Ora And To Bldg No P-160/7 (Battery Charging Room) At Mt Pool At Ina Ezhimala
Tender Value
47.58 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
16 days left
EMD
95200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E8 Tender Id-2026_Mes_Name Of Work: Addition / Alteration To Kitchen Cupboards/Wardrobes At Ora And To Bldg No P-160/7 (Battery Charging Room) At Mt Pool At Ina Ezhimala
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling boarding of kitchen cabinet/wardrobe , any description, fixed in any position with Screws incl fillets and all fittings,all as specified and as directed. |
| 2 | Dismantling stone slabs/ tiles of any description and thickness and making good the disturbed portion in CM 1:4 all as specified and as directed. |
| 3 | Demolition of PCC solid block masonry or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, all as specified and as directed. |
| 4 | Demolision of cement concrete manually/ by mechanical means including disposal of material within 50 metres lead all as specified and as directed. |
| 5 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.all as specified and as directed. |
| 6 | Material & labour for precast cement concrete Type B1(1:2:4) using 20mm graded aggregates solid building blocks set in CM 1:6 or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls all as specified and as directed. |
| 7 | Rendering 10mm thick on fair faces of brick work or concrete surfaces using Cement mortar (1:6 )to be finished even and smooth without using extra cement,all as specified and as directed. |
| 8 | Material & labour applying two coats of acrylic interior emulsion oil bound distember over a coat of primer and 3 mm thick wall care putty over newly plastered surface including preperation,all as specified and as directed. |
| 9 | Material & labour applying one coat of acrylic interior emulsion oil bound distember over old treated surface including preperation all as specified and as directed. |
| 10 | Material & labour 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick backing coat in CM 1:4,all as specified and as directed. |
| 11 | Rounding to edges of stone slabs to one edge, such as in kitchen platform, steps and other similar situations,all as specified and as directed. |
| 12 | Supply & fix 17-18 mm thick extruded polymer profile foam board made of ‘U’ Pvc polyester resin of any colour and pattern and having density of 0.70 g/cc used as in kitchen cabinets/ wardrobes/ Shutters/drawers etc fixed with drywall screws in required size and shape including finishing the edges/exposed surfaces with PVC/sunmica lipping complete all as specified and as directed .Note : Necessary fittings will be measured and paid separately under relevant items |
| 13 | Supply & fix 18-19 mm thick BWP grade Marine plywood (710 grade) having specific gravity more that 0.8, screw holding capacity more than 130 Kg and water absorption less than 5%. with two tier preservative treatment (Glue line protection and finished panels treated with ACC (Acid Copper chrome compound) as in kitchen cupboards / wardrobes / shutters etc complete all as specified and as directed .Note : Necessary fittings will be measured and paid separately under relevant items |
| 14 | Material & labour for 0.7-1.00mm mm thick glossy finish Acrylic laminate of surface finish, colour and pattern as approved, fixed etc with approved adhesive for fixing plywood / polymer profile foam board (Multiwood) as per manufacturer's instructions complete all as specified and as directed. |
| 15 | Supply & fix stainless steel telescopic Channel Drawers Slides of required length suitable for wardrobe/kitchen cabinet all as specifed and as directed. |
| 16 | Supply & fix stainless steel soft closing hydraullic hinges suitable for wardrobe/kitchen cabinet for shutter complete as specified and as directed |
| 17 | Supply & fix locks suitable for cupboard/ wardrobe all as specified and as directed. |
| 18 | Supply & fix stainless steel cupboard cloth hanging rods 50-60 cm long including fixing with brackets and fixing in cupboards/wardrobes,all as specified and as directed. |
| 19 | Supply & fix of 125 mm stainless steel handles, cast type, polished for cupboard shutters, etc. complete all as specified and as directed. |
| 20 | Supply & fix of multi purpose stainless steel (SS 304) plate /thali drawers of size 430x505x200mm for modular kitchens complete all as specified and as directed. |
| 21 | Supply & fix of multi purpose stainless steel (SS 304) plain basket drawers of size 430x505x200mm for modular kitchens complete all as specified and as directed. |
| 22 | Supply & fix of multi purpose stainless steel (SS 304) pullout drawers of size 430x505x200mm for modular kitchens complete all as specified and as directed. |
| 23 | Supply & fix of multi purpose stainless steel (SS 304) cup and saucer drawers of size 430x505x100mm for modular kitchens complete all as specified and as directed. |
| 24 | Supply & fix of Stainless steel Cutlery basket basket drawers of size 430x505x100mm for for modular kitchens complete all as specified and as directed. |
| 25 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required all as specified and as directed. |
| 26 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mp steelgrade,5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm), all as specified and as directed. |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and as directed. |
| 28 | Steel work in built up tubular (round.) Post., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complet all as specified and as directed.. |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture on steel surfaces to give an even shade (Two or more coats) , all as specified and as directed. |
| 30 | Providing and laying in position cement concrete of 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA)upto 25% : 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%), all as specified and as directed. |
| 31 | Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed. |
| 32 | Providind and fixing 10mm thick acid and / or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, joints filled with acid and/or alkali resistant cement as per IS : 4457, in dedo on 12 mm thick mortar 1:4( acid proof cement : 4 coarse sand) complete all as specified and as directed. |
| 33 | Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. (White Agaria Marble Stone), all as specified and as directed. |
| 34 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead, all as specified and as directed. |
| 35 | Supply & fix GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 36 | Supply & fix 4mm thick E-board , multi purpose, decorative type,for ceiling purpose complete all as specified and as directed. |
| 37 | Demolision of brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead all as specified and as directed. |
| 38 | Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level (Cement mortar 1:6 (1 cement : 6 coarse sand), all as specified and as directed. |
| 39 | Material & labour, 15mm thick rendering in CM 1:6 on wall surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 40 | Material & labour Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. one coat on wall complete all as specified and as directed. |
| 41 | Material & labour Wall painting old/ new with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats as required complete all as specified and as directed. |
| 42 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface, all as specified and as directed. |
| 43 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 20%), all as specified and as directed. |
| 44 | Providing Steel reinforcement 10 MM TMT Bar for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more, all as specified and as directed. |
| 45 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) all as specified and as directed. |
| 46 | Providing chequered Electrical rubber Mat 12mm thick anti skid shock proof insulation rubber mat for flooring black size , all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender