Tender For Repair And Maintenance Of Front Side Boundary Wall Of 132/33 Kv Grid Sub Station, Noamundi.
Tender Value
27.58 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
13 days left
EMD
55200
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West Singhbhum → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Front Side Boundary Wall Of 132/33 Kv Grid Sub Station, Noamundi.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of pucca brick or lime work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable material with all leads all complete job as per direction of E/I. |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item- A) and disposal of excavated earth as obtained to a distance up to 50M Including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design building specification and direction of E/I. |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150mm. thick, well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. |
| 5 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 6 | Providing and laying in position cement concrete of M10 excluding the cost of centering and shuttering-All work upto plinth level 1:3:6 (1 cement:3 coarse sand Zone-III:6 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying reinforced cement concrete of M20 (1:1.5:3), excluding the cost of centering, shuttering, finishiong and reinforcement-All work upto plinth level. |
| 8 | Reinforced cement concrete with nominal mix of (1:1.5:3) work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement. |
| 9 | Providing designation 75 A Brick work in C.M. (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing Tor steel reinforcement of 8 mm dia. rods as per approved design and drawing with cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. TMT Fe500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd Bokaro and Vizag (RINL) |
| 12 | Providing Tor steel reinforcement of 10 mm dia. rods as per approved design and drawing with cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. TMT Fe500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd Bokaro and Vizag (RINL) |
| 13 | Providing Tor steel reinforcement of 12 mm dia. to 25 mm dia rods as per approved design and drawing with cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. TMT Fe500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd Bokaro and Vizag (RINL) |
| 14 | centering and shuttering including strutting propping etc. and removal of form for |
| 15 | Foundation, footing, bases of column etc for mass concrete |
| 16 | Lintels, Beams, plinth beams, girders, brussumers and cantilevers |
| 17 | Columns, Pillars, piers, abutments, post and struts |
| 18 | Supplying M.S angle all complete as per direction of E/I. |
| 19 | Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates,holding down bolts, anchor plates at all heights and depths, bolting, welding(machining whe rever necessary) with applying a priming coat of red lead paint all complete as per approved drawing building specification and direction of E/I. |
| 20 | Supplying and fitting and fixing M.S. Grill gate with M.S. grills fitted on M.S. Angle frame of including cost of fabrication, providing necessary locking arrangement with haskal and domny dully fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work steel work, taxes all complete as per specification and direction of E/I. (when steel is not Supplied by the department). |
| 21 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 22 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including preparing the surface after removing rust,dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 23 | Providing two coats of snowcem of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes as per building specification and direction of E/I. |
| 24 | Carriage of materials |
| 25 | Cement (3 Km) |
| 26 | Coarse sand(Surface 18 KM + 2 KM) |
| 27 | Stone chips (Surface 25 KM) |
| 28 | Bricks (Surface 13 KM +2 KM) |
| 29 | Steel (3 Km) |
| 30 | Total |
| 31 | Deduct cost of old serviceble brick obtained after dismantling |
| 32 | Total |
| 33 | GST @18% |
| 34 | Total |
| 35 | Labour Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender