Tender For Provision Of Additional Power Supply For Power Laundry Building At Govt. Hospital, Sirkali In Mayiladuthurai District.
Tender Value
5.77 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
5770
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayiladuthurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Additional Power Supply For Power Laundry Building At Govt. Hospital, Sirkali In Mayiladuthurai District.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring with 2 x 1.5sq.mm PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light / fan point. (for electronic regulator) (5points per coil) |
| 2 | Supply and fixing of 4 Feet LED 20W fitting with LED 20W tube (Higher End) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube. |
| 3 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18\\") |
| 4 | Supply and fixing of 1No 6/16A two module socket, 1No 16A one module switch on suitable module surface mounting box (GI) with module cover plate (plastic) on wall with connections. (Higher End) |
| 5 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1No 32A DP MCB switch as incoming and 6Nos 6A to 32A SP MCB as outgoing on wall with earth connection only. (Higher End) |
| 6 | Supply and fixing of 200A capacity dust and proof cubical panel board of size 5 ft x 5 ft x 1 ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively and with supply and fixing of the following cubical mounting switches with centre bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in I.S specifications. (1) 200A TPN switch disconnector interior only with HRC fuses double break as incomer - 1No (2) 63A TPN switch disconnector fuse interior only with HRC fuses double break as outgoing - 4Nos (3) 32A TPN switch disconnector fuse interior only with HRC fuses double break as outgoing - 2Nos |
| 7 | Separate chamber on Top of one side should be built with (0-500V) Voltmeter, (0-250A) Ammeter with CT and selector switches with one set of LED pilot lamps set with fuse base, top with 10A HRC link for 3 phases the bus will have 4Nos of 1x1/4 bus for phase and neutral and 1No 1x1/4 earth bus all round the panel to provide double earth connection to the cubical switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 200A switches should be connected to the bus with same size of 1 x 1/4\\" fixed copper flat and 63A /32A switches should be connected to the bus by 1x1/6\\" fixed copper flat.The switch should be separated by 6mm thick hylem sheet separators and properly (double) earthed as per IE rules, CEIG specification. The panel should be powder coat painting Siemens grey complete with LED Digital Display for VAF Meter chamber. The cable size, capacity of switch and location should be marked with white paint. |
| 8 | Supply and fixing of 63A 4P MCB in sheet steel enclosure in flush with wall with earth connection. |
| 9 | Supply and run of 2 of 2.5sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5sq.mm copper wire with painting of suitable colour. |
| 10 | Supply and run of 2 of 6sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6sq.mm PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. |
| 11 | Supply and run of 4 of 10sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 10sq.mm copper wire with painting of suitable colour. |
| 12 | Supply and laying of 3½ x 150sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. |
| 13 | Supply and clamping of 3½ x 150sq.mm PVC copper LTUG armoured cable on post or on wall with MS clamps. |
| 14 | Supply and fixing of brass cable gland for 3½ x 150sq.mm PVC armoured LTUG cable with earth connection. |
| 15 | Supply and providing cable end termination of 3½ x 185sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. |
| 16 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia. not less than 40mm with copper earth plate of size125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 17 | Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. |
| 18 | Add GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender