Tender For Making Of Portable View Point At Adasa Ug To Oc Mine Under Saoner Sub Area Of Nagpur Area. E-
Tender Value
8.50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
10700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Making Of Portable View Point At Adasa Ug To Oc Mine Under Saoner Sub Area Of Nagpur Area. E-
BOQ
| Sl. No. | Item Description |
| 1 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 3 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre s desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical r urved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 5 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thicknessof 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws cmplete: Ridges plain (500 - 600mm) |
| 6 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws cmplete:Gutter (600 mm over all girth) |
| 7 | Providing and fixing G.I. pipe railinghaving 1.0 M height consisting 50 x 50 x 6mm thick M.S. angles as verticals at 1.5 Mc/c and additional posts at every cornerwith 3 rows of 25 mm dia G.I. pipes ofmedium class variety as horizontal andpainting 3 coats of oil paint over 1 coat ofanticorrosive paint of approved colour andshade including cost of all labour ,transporting bends to curved shape, etc.complete |
| 8 | Providing and supplying in standard lengthsISI mark rigid unplasticised PVC pipessuitable for potable water with solvent cementjoints including cost of couplers, as per ISspecification no. 4985 / 1988 excluding GSTlevied by GOI and GOM in all respect, includingtransportation, freight charges, inspectioncharges, loading, unloading, conveyance to thedepartmental stores and stacking the same inclosed shed duly protected from sun rays andrains including cost of jointing material i.e.solvent cement, etc. complete (selffit type to bejointed with cement solvent).NOTE : 1) 10% of cost of pipes shall be consideredfor cost of PVC specials for estimatepurpose only.2) One coupler and required cement solvent shall be provided with each full length pipecost of which is included in rates below.Working Pressure 4 Kg./Sq.cm 75 mm. |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil |
| 10 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 15 | Providing and fixing of retro reflectorised informatory sign board rectangular/Squareinshapehaving area less than 0.9 One Square Meter made out of ____mm aluminum sheet bonded with white retroreflective sheeting of Class__(TypeIVHighintensitymicroprismatic grade sheeting-HIP) having pressure sensitive/heat activated adhe sivereto reflective specified background, border and back side retoreflctive symbols, letters,numerals , arro wasper IRC:67-2012 TableNo8.3, supportedwithbacksupport frame25 mmx25 mmx3m m,dulypa intedon backs idewithtw ocoatsofgre ystoveenamel paintandsupp ortedononeno. mildsteelangle ironpost75mm x75mm x6m m,3 .5mt long firmly fixed to the groud by means of properly designed foundation with M25 gradecement concrete45cmx45cmx60cm, 60cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints havingalternateblackandwhitebands of 25 cm width including G Ifixures and transportation etc.complete.The nut bolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded.ClassB (Type IVHigh intensity micro-prismatic grades heeting-HIP) sheeting shall have7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting andcut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 17 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender