Tender For Provision Of Periodical Services For Mixing And Casting & Curing Group Of Facilities At Acem, Nashik
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
16 days left
EMD
79400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Periodical Services For Mixing And Casting & Curing Group Of Facilities At Acem, Nashik
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Aug-2026 | CORRIGENDUM NO 1 | Other | 31-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying two or more coats of painting to old wood / steel work with synthetic enamel paint of approved shade & make including preparation of surfaces etc., at all heights. |
| 2 | Finishing walls with Acrylic smooth exterior paint of required shade on Old work (one or more coat applied @0.90 ltr/sqm) complete at all heights. |
| 3 | White washing with lime to given an even shade on Old work ( two or more coats) complete at all heights. |
| 4 | Finishing walls with water proofing cement paint of required shade on Old work (one or more coats @ 2.20 kg/0 sqm ) complete. |
| 5 | Distemper with 1 st quqlity acrylic distemper (ready mixed) having VOC (Voltage Oragnic Compound ) content less than 50 gram/ litre,of approved brand and manufacturer including applying additional coats wherever required achieve even shade and colour on Old work (One or more coats ) |
| 6 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre,of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour on Two coats complete at all heights. |
| 7 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surfaces in three coats @ 14.35 kg/10 sqm.one coat of self priming of cementatious waterproofing polymer(dilution with water in ratio of 1:1) and two coats of cementatios waterproofing polymer (dilution with water in ratio of 3:1) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaser is visible, complete in all respect as per the direction of Enginner-in-Charge. |
| 8 | Filling of joints betwwen RCC plinth beam / floor slab and will panel of external, walls, toilet / bath room / wet areas walls on all floor and parapet wall over roof slab, stair case head room at the time of erection of GFRG panels with Grout RW/equivalent sealant compound after the erection of panel before the infill of concrete in panel cavities and fine finish. This applies for all horizontal and vertical joints between GFRG wall and slab panels. |
| 9 | Water prrofing treatment of of vertical joints (of external side and internal side) between door frame, window & ventilator frames (on all four sides ) of outer wall over the Zycosil/equivalent & Zycoprime/equivalent solution already applied (before the installation of door/window/ventilator frames in position) and fine finish with Grout RW/equivalent |
| 10 | Providing and injecting approved grout in proportion recommended by the manufacture into cracks/honeycomb area of concrete /masonry by suitable gun/pump.Srirrer mixed Acrylic polymer of aproved make @ 2% of weight of cement used) modified cement slurry made with non shrink compound in concrete/RCC work |
| 11 | Providing and injecting approved grout in proportion recommended by the manufacture into cracks/honeycomb area of concrete /masonry by suitable gun/pump.Srirrer mixed SBR polymer of aproved make) modified cement slurry made with shrinkage compensating cement in concrete/RCC work. |
| 12 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S.tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup lock & lock system with M.S. tube challiens,M.S.clamp and M.S.staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing in three after.The scaffolding system shall be stiffened with bracings,runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge.The elevational area of the scaffolding shall be measured for payment purppose.Note: This item to be used for maintenance work judicially, necessary deduction for scaffolding in the exisitng item to be done. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 16 daysAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender