Tender For Improvement Works At Lighthouse Tower And Allied Structures At Alappuzha Lighthouse.
Tender Value
54.69 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
23 days left
EMD
1.09 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works At Lighthouse Tower And Allied Structures At Alappuzha Lighthouse.
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead,with cement mortar 1:4 .including supply of all materials, labours ,scaffolding tools & plantsetc. complete. |
| 2 | Repair works to cracks in plastering / masonary / R.C.C. works: Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ≥45 MPa and adhesive bond strength Class R3 ≥1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For sealing cracks and faulty construction joints, routed out/ making U-shape groove size 25x25 mm and then primed the area with integral crystalline slurry @0.05 kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50 kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05 kg/running metre per coat.including supply of all materials, labours ,scaffolding tools & plantsetc. complete. |
| 3 | Replacing broken glass panes of window shutters with new plain/pin headed glass panes of 4 mm thick after removing carefully the broken pieces, providing new teak wood beadings using nails including supply of all materials, labour, tools & plants, scaffolding etc. complete. |
| 4 | Replacing broken fittings of doors, windows with new fittings of approved quality after removing carefully the damaged ones from position, including supply of all materials, labour, tools & plants etc. complete.-Providing and fixing stainless steel butt hinges 100x60x2.5 mm with necessary stainless steel screws etc. as directed including cost of all materials, labour, tools & plants etc. complete . |
| 5 | Providing and fixing stainless steel butt hinges 75x50x2.5 mm with necessary stainless steel screws etc. as directed including cost of all materials, labour, tools & plants etc. complete . |
| 6 | Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm |
| 7 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm including cost of all materials, labour, tools & plants etc. complete . |
| 8 | Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm including cost of all materials, labour, tools & plants etc. complete . |
| 9 | Providing and fixing bright finished brass door latch with necessaryscrews etc. complete : 300x16x5 mm including cost of all materials, labour, tools & plants etc. complete . |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm.including cost of all materials, labour, tools & plants etc. complete . |
| 11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm. |
| 12 | Providing and fixing aluminium casement stays, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 13 | Rewedging and cramping of doors,windows and ventilator for easy opening and closing including plaining the side of the shutters taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames,including replacement of hinges with screws, etc. as required as per the direction of the Engineer-in-charge including cost of all materials, labour, tools & plants,scaffolding etc., complete . |
| 14 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above .including cost of all labour, tools and plants etc complete as directed. |
| 15 | Dismantling wooden boardings in lining of walls and partitions, excludingsupporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm including cost of all materials labour, tools and plants etc complete as directed. |
| 16 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres .including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 17 | Providing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).including cost of all materials labour, tools and plants etc complete as directed. |
| 18 | Providing and fixing 35 mm thick second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately).including cost of all materials labour, tools and plants etc complete as directed. |
| 19 | Providing and fixing 25 mm thick second class teak wood Panelled or panelled & glazed shutters for cup board etc. including ISI marked anodised aluminium butt hinges with necessary screws etc. including cost of all materials labour, tools and plants etc complete as directed. |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)- Second class teak wood- 30 mm thick shutters |
| 21 | Providing and fixing second class teak wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. - Float glass panes - 4 mm thick glass pane (weight not less than 10 kg/sqm). |
| 23 | Providing and fixing 20mm thick 2nd class teak wood plain lining tongued andgrooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface.including cost of all materials labour, tools and plants etc complete as directed. |
| 24 | Providing and fixing following fixtures of approved make and as directed including supply of all materials, labour, tools & plants, etc. complete.-Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. including cost of all materials, labour, tools & plants etc complete as directed . |
| 25 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour- 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. including cost of all materials, labour, tools & plants etc complete as directed. |
| 26 | Providing and fixing 100 mm C.P. brass shower rose with 15 or 20 mm inlet including cost of all materials, labour, tools & plants. |
| 27 | Providing and fixing 15mm C.P brass long body bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including cost of all materials, labour, tools & plants etc complete as directed. |
| 28 | Providing and fixing 15mm C.P brass short body bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including cost of all materials, labour, tools & plants etc complete as directed. |
| 29 | Providing and fixing 15mm health faucet chromium of approved quality including cost of all materials, labour, tools & plants etc complete as directed. |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all materials, labour, tools & plants etc complete as directed. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 50mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all materials, labour, tools & plants etc complete as directed. |
| 32 | Providing and laying 110 mm dia. PVC sanitary pipe (Hycount/Premier/Supreme) line from water closet to septic tank including necessary earth work, refilling, making leak proof connections etc., including supply of all materials, labour, tools & plants etc. complete |
| 33 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge including cost of all materials, labour, tools & plants. |
| 34 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including cost of all materials, labour, tools & plants. |
| 35 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm including cost of all materials, labour, tools & plants etc complete. |
| 36 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.including cost of all labour, tools & plants etc complete as directed. |
| 37 | Providing and laying glazed Vitrified tiles Matt/Antiskid finish of in floor in size of Tile 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.size |
| 38 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including cost of all materials, labour etc complete as directed. |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. including cost of all materials, labour, tools & plants etc complete as directed. |
| 40 | Repairs to furniture of staff quarters including replacing unserviceable members cost of all materials, labour charges and tools & plants etc. complete as directed . -Replacing damaged plywood of cots with 8 mm thick marine plywood of approved brand after cutting, removing the damaged one, cutting to size and fixing new plywood with panel pins all as directed, including supply of all materials, labour, tools & plants etc. complete. |
| 41 | Repairs to wooden table including replacing the damaged plywood top / mica and replacing damaged members with new one with superior hard wood etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete. including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 42 | Repairs to wooden chair including replacing the damaged plywood seat / PVC caining seat, and replacing damaged members with new one with superior hard wood etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete. including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 43 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm with 2nd class teak wood beading 62x19 mm ,after removing the old net including cost of all materials ,labour ,tools and plants , brass screws etc. complete as directed . |
| 44 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 45 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 46 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with Powder coated aluminium (minimum thickness of powder coating 50 micron)extruded built up standard tubular sections/ appropriate Z sections and other sections for frame of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required includingc leat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :-Powder coated aluminium (minimum thickness of powder coating 50 micron) for partition |
| 47 | Powder coated aluminium (minimumthickness of powder coating 50 micron)For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 48 | Providing and fixing 12 mm thick prelaminated decorative lamination on both side particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge including supply of all materials, labour, tools & plants etc. complete . |
| 49 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) including supply of all materials, labour, tools & plants etc. complete . |
| 50 | Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. including supply of all labours,tools&plants, scaffolding, etc. complete as directed by the engineer in charge. |
| 51 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mmnominal thickness and of approved size and as per approved pattern onsteel frame work complete (steel frame work to be paid separately), including cost of all materials labour, tools and plants, scaffolding etc complete as directed. |
| 52 | Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete(steel frame work to be paid separately), including cost of all materials labour, tools and plants, scaffolding etc complete as directed. |
| 53 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 54 | Supplying Chlorpyriphos/ Lindane emulsifiable concentrate of 20%chemical emulsion in sealed containers including delivery as specified. including cost of all materials labour, tools and plants etc complete as directed. |
| 55 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.including cost of all materials labour, tools and plants etc complete as directed. |
| 56 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
| 57 | Demolishing cement concrete manually/ by mechanical means and disposal of material within 50 metres lead including cost of all material, Tools & Plants, labours, loading & unloading and transportation etc. complete as as per direction of Engineer-in - charge. |
| 58 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and for all lift, as directed by Engineer-in-charge- All kinds of soil, including supply of all materials, labour, tools&plants etc complete |
| 59 | Providing and laying in position cement concrete of specified grade1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) .including supply of all materials, labour, tools&plants etc complete as as per direction of Engineer-in-Charge. |
| 60 | Centering and shuttering including strutting, propping etc. and removalof form for- Lintels, beams, plinth beams, girders, bressumers andcantilevers, including supply of all materials, labour, tools&plants etc complete |
| 61 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:4 (1 cement : 4 coarse sand) from ground level upto floor V level etc. including cost of all materials labour, tools and plants etc complete as directed. |
| 62 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)including cost of all materials labour, tools and plants etc complete as directed. |
| 63 | Steel reinforcement for RCC work bend tied and placed in position with tested steel reinforcement bars conforming to relavent ISI specifications inluding supply of all binding wire, cutting, bending, binding etc supply of all materials labour, tools and plants etc complete as directed -Thermo-Mechanically Treated bars of grade Fe-500D or more including cost of all labour, tools & plants etc complete as directed. |
| 64 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing- 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including cost of all materials, labour, tools & plants ,scaffolding etc complete. |
| 65 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)including cost of all materials, labours, tools & plants,scaffolding etc. complete as directed. |
| 66 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labour, tools & plants,scaffolding etc complete as directed. |
| 67 | Providing and fixing Broken glass pieces over coping of compound wall in cement mortar for security purpose including cost of all materials, labour, tools & plants etc complete as directed by Engineer -in- charge, including cost of all materials, labour, tools & plants etc complete. |
| 68 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 69 | Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand) Cement mortar 1:3 (1 cement : 3 coarse sand) including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 70 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, including supply of all labours, tools & plants, materials,scaffolding etc. complete as directed by the engineer in charge. |
| 71 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :1part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge.The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @ 0.70 kg per sqm per coat, including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 72 | Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within 50 metres lead, including cost of all materials, labour, tools & plants etc complete. |
| 73 | Structural steel work riveted, bolted or welded in built up sections with G.I tube section of 50x50x3mm, 25x25x2mm trusses and framed work, including cutting ,hoisting,fixing in position and applying a priming coat of approved steel primer and framed work with G.i base plates of 200x200x8mm& G.I nutbolts, including cutting, hoisting, fixing in position.including cost of all materials, labour, tools & plants ,scaffolding etc complete as directed. |
| 74 | Supplying and fixing 80x1.20 mm M.S. laths with 1.20 mm thick top cover rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 75 | Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. Theprofile sheets shall be fixed to truss members in slope or requiredpitch or curvature with Hex cap headed self drilling/tapping Stainlesssteel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 0.91 mm, troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm including supply of all materials, labour, tools, scaffolding etc complete as directed |
| 76 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead. including supply of all materials, labour, tools&plants etc complete as as per direction of Engineer-in-Charge. |
| 77 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc.including supply of all materials, labour, tools&plants etc complete as as per direction of Engineer-in-Charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 78 | Painting two coats with Synthetic enamel paint (Asian / Berger/or equivalent) of approved brand and manufacture of required colour to the exterior of the Lighthouse Tower to give an even shade after scrapping and cleaning the surface and applying a coat of cement primer etc as directed including cost of all materials, labour, tools & plants ,scaffolding etc complete. |
| 79 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost of all materials, labour, tools & plants ,scaffolding etc complete. |
| 80 | Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre, including cost of all materials, labour, tools & plants ,scaffolding etc complete. |
| 81 | Wall painting with acrylic emulsion paint, Interior wall of LH Tower having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including cost of all materials, labour, tools & plants , scaffolding etc complete. |
| 82 | Wall painting with acrylic emulsion paint, Interior wall of the building having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including cost of all materials, labour, tools & plants , scaffolding etc complete. |
| 83 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface including cost of all materials, labour, tools & plants , scaffolding etc complete. |
| 84 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives to the Kerb stone and paver block - (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 85 | Painting two coats of Synthetic enamel paint (Asian / Berger) of approved quality and color to the wooden doors, windows, Ventilators etc of the building after, cleaning all dirt, dust, sand papering, applying a coat of metal primer to rods wherever directed , including cost of all materials, labour, tools, scaffolding etc. complete. |
| 86 | Melamine polishing on wood work (one or more coat).including cost of all materials labour, tools and plants etc complete as directed. |
| 87 | Recovery of scrape value for old dismantled / removed fitting / items. SS / Al Butt hinges 100x60x2.5 mm |
| 88 | SS / Al Butt hinges 75x50x2.5 mm |
| 89 | 100 mm Aluminium Handle |
| 90 | 125 mm Al / Brass Handle |
| 91 | Aluminium sliding door bolts |
| 92 | 300 mm brass / aluminium hard drawn Aldrop |
| 93 | Aluminium tower bolts - 200x10 mm |
| 94 | Aluminium tower bolts - 100x10 mm |
| 95 | Aluminium casement stays, |
| 96 | Dismantling tiled roofing with battens |
| 97 | Scrap steel Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender