Tender For Fabrication, Supply And Installation Of Bar Screen In The Incoming Chamber At Mansarover Park Sps.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Aug 2026
4 days left
EMD
49800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication, Supply And Installation Of Bar Screen In The Incoming Chamber At Mansarover Park Sps.
BOQ
| Sl. No. | Item Description |
| 1 | Plugging of total sewage water entering into the channel by closing the incoming and outgoing gate also complete isolation of water entering in area necessary items such as gunny bags etc. of each bar screen during operation one by one. |
| 2 | Dewatering of channel one by one for creating proper working space by using of pump set with complete arrangement as per site requirement. |
| 3 | Dismantling of Complete bar screen from the existing channel after blocking the incoming flow of the sewer with Sluice gates and gunny bags and diverting the flow of sewage by installing sewage submersible pumps of suitable capacity for keeping the chamber dry for repairing work. Taking out the complete Screen with boom Crane from the channel including chipping of RCC channel structure with hammer drill and chisel. |
| 4 | Making a temporary working platform by approximately 25 Ft long bamboos and manila rope etc. inside the approx. 30 ft. deep channel at different height location in the individual pit/channel. |
| 5 | Providing of safety items as per site requirement |
| 6 | Dismantling MS structure and civil structure as per site requirement. |
| 7 | Supply installation testing and commissioning of E.O.T. Crane hoist of 3-ton capacity, ±415v AC electric motor, flanged modulate TEFC type, SS rope of 10 mm thick or as per manufacturer standard as per site requirement. Make - Globe/reve/indef/DJB Approved Make |
| 8 | Supply of Size nut bolts as per site requirement. |
| 9 | Supply of Fasteners as per site requirement. |
| 10 | Fabrication and fixing of MS 'C' channel guider in vertical Position of 40-45 feet Long/as per site requirement of size 100mm x 50mm on both side walls in the sewage channel for up and down of bar screen. Welding of MS plate of size 200x200x10mm with 'C' channel duly drilled 4 no. holes of 16mm at every corner of plate and fixing with fasteners of 16 mm inside the wall of channel. |
| 11 | Making of RCC civil foundation2 Nos. each with grouting of MS. Stud for fixing of vertical I- section beam also includes the cost of civil material with labour charges. |
| 12 | Supply & fixing I section of size 200mm x 100mm up to suitable height approx. 15 feet for the support of bar screen and fixing the I section beam on foundation and tightening all nut bolts as per site requirement and providing fixing I section beam in horizontal position to hang 3-ton capacity EOT crane. |
| 13 | Providing and fixing stainless steel (Grade 304) L shape Bar screen of size approx. 3M(L) x 2m(W) x .5m at bottom to make L shape made by S.S. 304 angle 100X50X6mm for frame and flat 50X8 mm inner portion welded one by one on 40mm gap in each flat, making the clamping system at upper side of screen for fixing the hook of EOT crane by heavy duty SS material, SS plate, SS pin shaft with nut etc. as per job requirement including welding, grinding, buffing and making and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing with necessary arrangement as per site requirement |
| 14 | Providing and fixing of MS sheet at top level of water flow so that the water could not pass by upper of bar screen. The size of sheet will be approx. 8m x 2m x 5mm and side supported along with ss jaali connect with top level MS sheet of suitable size of 5 mm thickness duly welded with supporting angle of size 65x65x6 fabricated and making proper strengthening for bearable of water flow pressure as per site requirement. |
| 15 | Providing & fixing of distribution standing floor mounted with steel frame 3mm galvanized sheet steel CRCA panel base frame 3mm MS channel 400mm height painted in black, cable entry bottom only, canopy on top with minimum 10 deg. C slope extended 50 mm out side panel front and rear door type central opening double leaf with insulating rubber grip handle ,1 no. incomer 100 Amp. TPN MCCB and outgoing feeder 4 x 32 Amp. TPN with over voltage protection relay Ammeter / Voltmeter of suitable size, indicating LED, supply & laying 4 x 6 sq. mm aluminium armoured cable 30 meter each, their connection at both ends and with LT panel along accessories like thimble, PVC tape tools and tackles etc. |
| 16 | Painting and primer charges of newly making complete system by one coat of primer & minimum two coat of enamel paint of required shade & colour. |
| 17 | Testing & commissioning of complete system includes the transport charges of tools & tackles to & fro Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender