Tender For annual repair & maintenance of Various Roads Under Pwd Division South West Road-1 During 2026-27. (Sh: - Providing And Fixing Road Furniture, Retro-Reflective Signages And Other Traffic Safety Measures On Nh-8 Under Sub-Division-Ii, New De
Tender Value
2.45 Crore
Estimated cost
Bid Submission
20 Aug 2026
5 days left
EMD
4.90 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Various Roads Under Pwd Division South West Road-1 During 2026-27. (Sh: - Providing And Fixing Road Furniture, Retro-Reflective Signages And Other Traffic Safety Measures On Nh-8 Under Sub-Division-Ii, New Delhi).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 7 | Hot finished welded type tubes. |
| 8 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 9 | On steel work |
| 10 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 11 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. |
| 12 | Modified estimated cost after using correction factor on DSR 2023 on account of GST @ 0.973 on DSR items |
| 13 | Add Cost Index 4.03% on DSR Items |
| 14 | Providing and Fixing of Solar Raised Pavement markers made out of polycarbonate molded body with circular shape, solar powered, LED self-illumination in active mode, 360-degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20,000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0°C to 70°C. Typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4V in sleep/parking mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less than 10 mm × 100 mm × 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilograms. Fixing will be done by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. The solar raised pavement markers shall be tested for Compression strength of 20,000 Kg, IP 65 rating, Blinking frequency from government lab (CRRI/ARAI/CAT/CPRI) as per requirement of MoRTH and report shall be uploaded while quoting the tender. The bidder shall submit the sample of the Solar STUD complying to the item specification in schedule & Ministry/IRC conditions. Sample of Solar STUD shall be signed by the Representative of the Solar STUD OEM on the back side. |
| 15 | Providing and placing sand barrels made of durable impact-resistant material, of yellow colour with black lid, designed for easy movement and handling, capable of being arranged in different configurations to achieve required sand-filled weights of 90 kg, 180 kg, 320 kg, 640 kg and 950 kg as per standard array geometries, comprising single-piece sand containers to eliminate sand leakage (without edge seals), provided with cone inserts to facilitate easy transportation, storage and installation, complete in all respects as per manufacturer’s specifications and directions of Engineer-in-Charge. |
| 16 | Providing and fixing flexible spring posts / bollards made of virgin special flexible Polyurethane (PU) material manufactured by single moulded process, circular/cylindrical in shape, capable of restoring to original position without damage to vehicle or post after high-speed vehicular impact, fitted with PMMA reflectors of 70 mm diameter of approved colour (amber/white) riveted on both sides at the circular top, provided with highly reflective tape of minimum 15 mm width between reflector and circular top on both sides for improved night visibility, further provided with two bands of highly reflective Type-IV 5930M reflective tape of minimum 70 mm width on the post, UV-stabilised to prevent discoloration, suitable for fixing department’s logo as and when required by Engineer-in-Charge, of height about 800 mm, base diameter about 250 mm, base provided with four holes of 12 mm diameter for anchoring, weighing about 1.4 kg, fixed on road surface complete in all respects as per manufacturer’s specifications and directions of Engineer-in-Charge. |
| 17 | Providing and fixing road delineators of height 1000 mm, made of Mild Steel (MS) body with powder-coated finish for longer service life, fitted with high-performance Type XI retro-reflective sheeting conforming to IRC:79-2019 and MoRTH specifications, having superior engineered design for maximum day and night visibility, provided with grooved edges for fixing of reflective sheeting to prevent vandalism, of size approximately 100 mm × 30 mm × 1000 mm, complete with all fittings and accessories, installed at required locations complete in all respects as per manufacturer’s specifications and directions of Engineer-in-Charge. |
| 18 | Providing and fixing flexible median markers made of flexible thermoplastic body, fitted with fluorescent yellow Type XI retro-reflective sheeting conforming to IRC:79-2019 and MoRTH specifications, designed for superior flexibility and maximum visibility during day and night, provided with deep grooved edges and side sealing to prevent vandalism of reflective sheeting, having single shank arrangement for easy installation by grouting, of size and shape as specified in IRC:79-2019, complete in all respects as per manufacturer’s specifications and directions of Engineer-in-Charge |
| 19 | Providing, installing and fixing with necessary clamps etc. retro reflective Single Sided directional/ Cautionary/ Mandatory/Gantry signboards comprising of customized modular PU Epoxy coated MS tube, frame work, aluminum composite panel (ACP) , digitally printed micro prismatic retro-reflective sheet signages with QR Codes. i.The horizontal and vertical members of the MS frame module shall be made of MS tube. ii. The aluminum composite panel (ACP) shall have thickness of 4mm consisting of 3mm thick Non FR grade thermoplastic core of LDPE/HDPE sandwiched between two 0.50 Aluminum sheets. The ACP Sheet shall be coil coated with kynor 500 base PVDF on one face and another face will be mill finish for pasting retro reflective sheet. The ACP shall be routed, folded and fixed on the MS frame with VBH tape, 24mm wide and 2.3mm thick of approved brand & made provided throughout the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm center to center on both side of frame ensuring that no riveting is seen on either face of the frame. iii. On the front face of the ACP, micro prismatic retro reflective sheet conforming to Type-XI of IRC 67-2022 and ASTM:D4956- 17 with digitally printed signs on top of the base retro reflective sheeting covering the entire sign facia (end to end) shall be pressure fixed. The sign shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufacuted and supplied by the reflective sheeting manufacturer. The digital printer and digital ink shall be approved by the reflective sheeting manufacture. Digitally printed traffic colour (which ever required) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflective established for its colour and type of sheeting. iv. The rear side of the MS frame shall be covered with balancing ACP sheet of the same description as mentioned above and shall be fixed in similar manner as described above. The edges of the board shall be covered alround with 50 micron powder coated die cast extruded aluminum channel of required color and shade of size 68x12x2mm. the channel shall be fixed using two rows of double sided VHB tape of above description. The channel shall further be secured by pop riviets having SS screws of 5mm dia at junctions and corners. v. Labes/QR Code to be printed on signage at bottom right side corner (2”x2”) with details like name of manufacture, date of manufacturing, code of reflective sheeting used, warranty etc. Note: The rate shall include all materials, labour, equipments, fabrication transportation, erection, installation and incidentals all complete as per direction of Engineer-in- Charge. (All structural steel work shall be paid for separately under the relevant agreement item,including MS hollow section frame work and fixing arrangement with clamps for the sign boards ). Only front area of the board shall be measured for payment. |
| 20 | Providing, installing and fixing with necessary clamps etc. retro reflective Double Sided place identification/ Road Name signboards comprising of customized modular PU Epoxy coated MS tube, frame work, aluminum composite panel (ACP) , digitally printed micro prismatic retro reflective sheet signages with QR Codes. i.The horizontal and vertical members of the MS frame module shall be made of MS tube . ii. The aluminum composite panel (ACP) shall have thickness of 4mm consisting of 3mm thick Non FR grade thermoplastic core of LDPE/HDPE sandwiched between two 0.50 Aluminum sheets. The ACP Sheet shall be coil coated with kynor 500 base PVDF on one face and another face will be mill finish for pasting retro reflective sheet. The ACP shall be routed, folded and fixed on the MS frame with VBH tape, 24mm wide and 2.3mm thick of approved brand & made provided throughout the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm center to center on both side of frame ensuring that no riveting is seen on either face of the frame. iii. On the front face of the ACP, micro prismatic retro reflective sheet conforming to Type-XI of IRC 67-2022 and ASTM:D4956- 17 with digitally printed signs on top of the base retro reflective sheeting covering the entire sign facia (end to end) shall be pressure fixed. The sign shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufacuted and supplied by the reflective sheeting manufacturer. The digital printer and digital ink shall be approved by the reflective sheeting manufacture. Digitally printed traffic colour (which ever required) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflective established for its colour and type of sheeting. (All structural steel work shall be paid for separately under the relevant agreement item, including MS hollow section frame work and fixing arrangement with clamps for the sign boards which are included in this item).iv. The rear side of the MS frame shall be covered with balancing ACP sheet of the same description as mentioned above and shall be fixed in similar manner as described above. The edges of the board shall be covered alround with 50 micron powder coated die cast extruded aluminum channel of required color and shade of size 68x12x2mm. the channel shall be fixed using two rows of double sided VHB tape of above description. The channel shall further be secured by pop riviets having SS screws of 5mm dia at junctions and corners. v. Labes/QR Code to be printed on signage at bottom right side corner (2”x2”) with details like name of manufacture, date of manufacturing, code of reflective sheeting used, warranty etc. Note: The rate shall include all materials, labour, equipments, fabrication transportation, erection, installation and incidentals all complete as per direction of Engineer-in- Charge. (All structural steel work shall be paid for separately under the relevant agreement item,including MS hollow section frame work and fixing arrangement with clamps for the sign boards ). Only front area of the board shall be measured for payment. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender