Tender For Addition / Alteration To Met Section, Roof Of Ante Room At Officer Mess, Provn Of Septic Tank For Ifs And View Cutter Around Living In Billet Of Agniveervayu Woomen Under Ge (Af) Srinagar.
Tender Value
23.35 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
46700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration To Met Section, Roof Of Ante Room At Officer Mess, Provn Of Septic Tank For Ifs And View Cutter Around Living In Billet Of Agniveervayu Woomen Under Ge (Af) Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R Work) |
| 2 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 3 | M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. |
| 4 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 5 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 6 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 7 | Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 1mm thick wall care putty to obtain smooth / even surface using sand paper and applying two coats of oil bound diameter over a coat of primer, complete all as specified and directed. |
| 8 | Preparation of new plastered surfaces of walls and applying two coats of anti-fungal exterior emulsion paint over a coat of cement primer including thin layer of wall care putty, complete all as specified and directed. |
| 9 | Preparation of old decorated plastered or unplastered surfaces of wall including filling of holes, cracks and undulating surface with cement wall care putty making surface even and smooth and applying two coats of distemper oil emulsion paint (OBD), complete all as specified and directed |
| 10 | Complete removal of existing treatment from brick walls or concrete plastered or unplastered surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc. including cornices, pilasters etc. and applying two coats of weather paint (Apex) over a coat of exterior primer upto 15m height, complete all as specified and directed. |
| 11 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 12 | M&L for Vitrified tiles, coloured, size 600 x 600 x 9mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed |
| 13 | M&L for Vitrified tiles, coloured, size 600 x 600 x 9mm thick as on vertical surfaces, such as skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 14 | M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 15 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 16 | S&F pressed steel frame for doors with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. |
| 17 | S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 18 | Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 19 | S&F aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply and fixing of 5mm thick plain glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. |
| 20 | S&F for powder coated aluminium grill (Thickness or powder coating not less than 50 micron) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, complete all as specified and directed. |
| 21 | &F aluminium powder coated aluminium Door / Partitions having (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/RM mounted on bearing to slide on tracks plain anodized in approved shade including supply and fixing of 5.5mm thick Plain / Frosted / glass, ACP / HPL sheet and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc., complete all as specified and directed. |
| 22 | S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed. |
| 23 | S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 24 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 25 | S&F 140mm floor door stopper of aluminium body and tongue anodised with land drawn steel spring overall length of cover plate, fixed with screws, complete all as specified and directed. |
| 26 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 27 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed. |
| 28 | S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 6mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / aluminium framework with screws, complete all as specified and directed. |
| 29 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 30 | M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. |
| 31 | Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed. |
| 32 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 33 | Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in any type of soil, complete all as specified and directed. |
| 34 | Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25cm, complete all as specified and directed. |
| 35 | Removal of excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed. |
| 36 | M&L for plain cement concrete, 1:4:8, Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 37 | M&L for chequered cement concrete tiles size 300 mm x 300 mm x 22-25mm thick with grey cement and pigment , rubber moulded with laquer polish for extra shine, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 38 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball PVC float valves, high pressure, with polythene float and flynut, complete all as specified and directed. |
| 39 | M&L for Hard core of broken stone gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed. |
| 40 | M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 41 | M&L for 50mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floor finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed. |
| 42 | M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without extra cement, complete all as specified and directed. |
| 43 | M&L for stone walling of random rubble masonry brought up to course, well bonded, bedded and solidly hearted built in CM 1:6, complete all as specified and directed. |
| 44 | M&L for plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in coping, edges of interlocking tiles /chequered tiles, roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 45 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 46 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 47 | M&L for Reinforced cement concrete, 1:1.5:3, Type A-1 (using 20 mm graded crushed stone aggregate) for columns, pillars, piers, posts and struts etc., under-reamed piles and mass concrete, complete all as specified and directed. |
| 48 | Formwork for rough finished surfaces of concrete to sides and soffits of floor beams, roof beams, beams, haunchings, girder, lintels, cantilevers, shelves including supports overhangs etc., complete all as specified and directed. |
| 49 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 50 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions Square and rectangle or polygon, complete all as specified and directed. |
| 51 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 52 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed . |
| 53 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed . |
| 54 | S&F in repairs 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed. |
| 55 | S&F 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified and as directed. |
| 56 | S&F 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified and as directed. |
| 57 | S&F vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, inluding 32mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement and 15mm dia PVC connection 450mm long, chain and plug and porcelain stopper, complete all as specified and directed. |
| 58 | S&F 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed. |
| 59 | S&F 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed. |
| 60 | S&F 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed. |
| 61 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 62 | S&F brass chromium plated tubular towel rail 20mm dia \\"D\\" type 60cm long between flanges, complete all as specified and directed. |
| 63 | S&F 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 64 | M&L for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. and rubbish not exc. 50m, complete all as specified and directed. |
| 65 | M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in CM 1:4, complete all as specified and directed. |
| 66 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in any type of soil, complete all as specified and directed. |
| 67 | M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates), benching / copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 68 | M&L for hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E -165, complete all as specified and directed. |
| 69 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 70 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe-410- W (GdeE-250) quality B (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed. |
| 71 | S&F 6mm thick MS sheets as in gates conforming to Fe 410 Gde E-250 quality- A, complete all as specified and directed. |
| 72 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 73 | M&L for septic tank for (50 users) in soft / dense soil, size 4.0m length, 1.40m breadth, 1.60m depth, single chamber with thickness of slab 100mm and RCC baffle wall of thickness 80mm complete all as per detail of reinforcement and drawing as mentioned in TD Drg No CE/AF/STD-15/2000 Sheet No. 1/2 and 2/2 dated 05 Jan 2000, with foundation in PCC 1:2:4, brickwork and plaster in CM 1:4 with using sub class 'B' old size brick, RCC slab covers including RCC Precast Manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc. including form work excavation, returning filling, removal of ecavated material and site clearance, complete all as specified and directed. |
| 74 | M&L for concrete bed to 150mm bore drain pipes including packing under, and haunchings against the sides of pipes after they are laid in cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) and tested, complete all as specified & directed. |
| 75 | S&F 150mm bore, HDPE double wall corrugated Pipe in any length with rubber ring joints, laid in trenches for sewage pipe with PCC packing under hunching and bedding, complete all as specified and directed. |
| 76 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately). |
| 77 | Supply only integral water proofing compound, complete all as specified and directed. |
| 78 | M&L for Precast reinforced cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in cover slab for soakage well / manhole and similar works supported on walls including necessary formwork and set in cement mortar 1:4, complete all as specified and directed. |
| 79 | M&L for 15mm thick rendering in CM 1:4 finished even and smooth brushing neat cement slurry with 3.0 Kg of cement per Sqm mixed with water proofing compound on existing old surface of concrete and apply a coat of bituminous primer conforming to IS-3384 @ 0.3 litre / Sqm on the prepared surface of plaster after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg / Sqm of plastered surface. Provide polymeric water proofing membrane with centre core 90 microns high molecular high density polyethylene film and minimum weight of water proofing membrane shall be 3 Kg per Sqm ISI marked laid with overlaps, bonded with hot blown bitumen. Over the polymeric water proofing membrane apply semi hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg / Sqm of roof surface and blinded with fine sand in dry condition @ 0.5 Kg / Sqm dusted over the bitumen coat and applying two coats of aluminium paints including demolition of existing treatment, complete all as specified and directed. (Note : integral water proofing compound measured seperately.) |
| 80 | M&L for applying two coats of water proofing chemical coating as per manufactures instruction. Make :- Dr Fixit (Brand- Pidifn 2k/Fastflex), complete all as specified and directed. |
| 81 | M&L for 25mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floor finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed. |
| 82 | M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 83 | Schedule 'A' Part-II (E/M Work) |
| 84 | Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing, complete all as specified and directed. |
| 85 | M&L for Point wiring for light / fan point controlled by one way switch 6 Amps 240 volts with 1.5 sqmm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed copper wire 1100 volt grade in and including concealed conduit, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 1.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) |
| 86 | All as per Ser item No 83.00 here in above but bell point controlled by one bell push switch 6 amps 240 volts |
| 87 | All as per Ser item No 83.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on independent Board. |
| 88 | All as per Ser item No 83.00 here in above but 3 pin 6 Amps switch socket outlet point on same board. |
| 89 | All as per Ser item No 83.00 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 16 Amps power point. |
| 90 | S&F Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed. |
| 91 | S&F modular Socket 6 Amp, 230 volts, 5 Pin universal, 2 Module, complete all as specified and directed. |
| 92 | S&F Modular switch 1 way, 16 Amp, 240 volts ,1 Module, complete all as specified and directed. |
| 93 | S&F Modular socket 6/16 Amp, 250 volts, 2 Module, complete all as specified and directed. |
| 94 | S&F modular bell push switch with indicator 6 Amp 240 volte, 1 Module, complete all as specified and directed. |
| 95 | S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed. |
| 96 | S&F bell electric AC,230V, single phase ,ding dong type, complete all as specified and directed |
| 97 | S&F modular step type fan regulator suitable for 120 watt 250 volts, 2 Module, complete all as specified and directed. |
| 98 | S&F decorative box type fitting with blue colour end cap for LED tube 20 watt luminaire for 230 volt AC including LED tube 20 watt, complete all as specified and directed. |
| 99 | S&F LED luminaire 600mm x 600mm, 35/36 Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexiable copper conductor cases of suitable size, complete all as specified and directed. |
| 100 | Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts in its original location and hanging connecting and testing ceiling fan for smooth functioning including replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose, and painting with one coat of synthetic enamel paint with spray painting machine & marking MES No. with black paint, complete all as specified and directed. |
| 101 | S&F epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made, (double door) 8 way single pole & neutral suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed. |
| 102 | S&F MCB of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'C' curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 103 | S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc all as specified and directed. |
| 104 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. |
| 105 | M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm gradedcrushed stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe including taking down old one, complete all as specified and directed. |
| 106 | Note: (i) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. |
| 107 | Deduction to be made from BOQ for Schedule 'A' Part-III (Credit Schedule from dismantling / taking down items) worth Rs 11,570.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender