Tender For Repair / Replacement Of Joinery, Wall Panelling, Collapsible Gate, Aluminum Partition, Window, Door, False Ceiling And Other Misc Connected Works At Techical Area Under Ge (Af) Srinagar.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Joinery, Wall Panelling, Collapsible Gate, Aluminum Partition, Window, Door, False Ceiling And Other Misc Connected Works At Techical Area Under Ge (Af) Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | S&F powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 6 mm ACP sheet of white/coloured /5.50 mm thick plain /tinted / heat reflecting glass pan as directed by Engr-in-Charge including aluminium beading for fixing board including dismantalling of existing aluminium partition (Payment for glass and ACP sheet will be paid under respective item), complete all as specified and directed. |
| 2 | S&F aluminium powder coated glazed shutter (for doors) with frame of section size 101.60 x 44.45mm 16 gauge and style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 16 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring /100 MM SS Door hinge 3x nos, both side opeining without sash bars but including 6mm ACP sheet of white / coloured /5mm thick plain / tinted / heat reflecting glass pan as required at site with and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortice lock) and aluminuium anodised tower bolt 200 mm long and hydraulic floor door spring, complete all as specified and directed. |
| 3 | S&F 5.50 mm thick plain /tinted / heat reflecting glass pan, ordinary quality in squares exc 0.5 sqm each pane, complete all as specified and directed. |
| 4 | S & F for 6 mm ACP sheet of white/coloured for aluminium partition / doors, complete all as specified and directed. |
| 5 | S&F in repairs 12mm thick wooden wall panelling of second class softwood with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coats of French polishing on all the exposed surfaces wooden panelling including taking down existing electrical fittings and re-fixing the same, complete all as specified and directed. |
| 6 | S&F in repairs solid PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specifications,complete all as specified and directed. |
| 7 | S&F UPVC double shutters windows / ventilators, side hung, with glass 5mm clear toughened+12mm A.G.+ 5mm clear toughened, stainless steel wiremesh, Profile-Mozart Premium, colour white, drainage-Face, reinforcement-standard, T-joints-mechanical / V-welded, bead-default, mesh-Pull down, handle type-cocksper handle, complete all as specified and as directed. |
| 8 | M&L for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking down old, complete all as specified and directed. |
| 9 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 10 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 11 | Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site, complete all as specified and directed. |
| 12 | S&F in repairs mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel / wooden shutter of door & windows, complete all as specified and directed. |
| 13 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty, wooden beads and aluminium beading in square or rectangular in section n exc 0.5 Sqm in each pane including hacking old broken glass, complete all as specified and directed. |
| 14 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 15 | S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 12mm thick perforated particle board for insulation and accoustics purposes , 60 cmx 60 cm size as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes including dismantling of existing ceiling, complete all as specified and directed. |
| 16 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. |
| 17 | S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 18 | S&F aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply and fixing of 5mm thick plain glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. |
| 19 | S&F in repairs 100mm long floor door stopper of aluminium alloy body and tongue with rubber cover ends, complete all as specified and directed. |
| 20 | S&F in repairs aluminium (die cast body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg, complete all as specified and directed. |
| 21 | S&F 30mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. |
| 22 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 23 | S&F 30mm thick 2nd class softwood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers, complete all as specified and directed. |
| 24 | Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 25 | Preparation of old painted wood surfaces and wood based materials of any description over 10cm width or girth and applying one coat synthetic enamel paint, complete all as specified and directed. |
| 26 | S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. |
| 27 | S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 28 | S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed. |
| 29 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 30 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 31 | M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. |
| 32 | M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 33 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 34 | M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed. |
| 35 | M&L for 15mm thick rendering on fair faces on brick or concrete surfaces in CM 1:4, fair finished the surfaces even and smooth without using extra cement including scaffolding upto 12m height, complete all as specified and directed. |
| 36 | M&L 10mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 37 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 38 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting, on plastered surface preparatory to distempering , complete all as specified and directed. |
| 39 | Preparation of new surface of wall and applying two coats of cement based paint over one coat of primer including scaffolding up to 15m height, complete all as specified and directed. |
| 40 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 41 | M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but n exc 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 42 | M&L for 25mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 43 | M&L for 10 to 12 mm thick vitrified parking tiles in approved shade from meteor series, area of each tile exceeding 0.08 Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in matching coloured polymer cement based grout to match over and including 15 mm thick Screed bed or bedding layer in CM 1:6, complete all as specified and directed. |
| 44 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 45 | M&L for Glazed ceramic tile 450x 300 x 06-7mm thick (coloured) on vertical surfaces such as wall, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 46 | M&L for 10 to 12 mm thick 3D exterior wall tiles in stone /bulging/ approved shade from meteor series/ matt finish as approved, area of each tile exceeding 0.08 Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in matching coloured polymer cement based grout to match over and including 10 mm thick Screed bed or bedding layer in CM 1:6, complete all as specified and directed. |
| 47 | S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed. |
| 48 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. |
| 49 | S&F in repairs vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flangedend bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed. |
| 50 | S&F in repairs 1.5mm thick Polycarbonate sheet fixed with self tapping stainless steel screw and washer upto 20m height, complete all as specified and directed. |
| 51 | S&F in repairs 12mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 52 | M&L for etching on toughened glass designed and pattern as approved, complete all as specified and directed. |
| 53 | S&F in repairs stainless steel handle 450mm size & 25mm dia suitable for toughened glass door, complete all as specified and directed. |
| 54 | S&F in repairs 2 levers stainless steel floor lock suitable for toughened glass door, complete all as specified and directed |
| 55 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel over, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 56 | S&F in repairs 300mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames, complete all as specified and directed. |
| 57 | S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, complete all as specified and directed. |
| 58 | S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed. |
| 59 | S&F in repairs 6mm thick glass corner shelves, fancy type, 225x225mm size, complete all as specified and directed. |
| 60 | S&F in repairs brass chromium plated tubular towel rail 20mm dia \\"D\\" type 60cm long between flanges, complete all as specified and directed. |
| 61 | S&F in repairs mirror cabinet selected quality of size 450mm x 600mm, box type, with PVC frame, complete all as specified and directed. |
| 62 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed. |
| 63 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and direction. |
| 64 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 65 | S&F in repairs 20mm dia stainless steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed. |
| 66 | Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 84,290.00 during AOC.(Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender