Tender For Provn Of Security Lights Behind Bldg No T-76, T-525, T-6 & T-87 In ‘H Zone, Addn/Altn To Elect Supply Of Bldg No T-13, T-14, T-15 & T-16 Of 3 Cesr, Provn Of Elect Geyser And Wall Mounting Fan For Bldg No Opt-434, Opt-304, special repair Nc
Tender Value
26 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
18 days left
EMD
52000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Security Lights Behind Bldg No T-76, T-525, T-6 & T-87 In ‘H Zone, Addn/Altn To Elect Supply Of Bldg No T-13, T-14, T-15 & T-16 Of 3 Cesr, Provn Of Elect Geyser And Wall Mounting Fan For Bldg No Opt-434, Opt-304, special repair Nco Line, Opt-424, T-14, T-15, T-16, T-17 & T-18 & T-19 Of 165 Mh And Provn Of 02 X Air Curtain Or Cook House And Dining Hall At Bldg No P-397 At 4003 Fd Hosp
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Point wiring complete for one 3 pin socket outlet 5 Amps on the Independent board with two runs of 2.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping/conduit including provision of 2.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. |
| 2 | M&L for Switch socket combination 2 in 1, 5A, flush type complete all as specified and as directed. |
| 3 | M&L for DBOXx (With Sheet Steel Enclosure) 20 Amp MCB protected socket Complete all as specified and as directed. |
| 4 | Supply, Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology for inner tank with incoloy heating element with minimum 4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and directed. |
| 5 | M&L for sub main wiring with two runs of 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors of , 1100 volts grade, drawn through and including PVC double locked Casing & caping complete all as specified and as directed. (Note : For Geyser) |
| 6 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 4 core complete all as specified and as directed. |
| 7 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 6 sq mm, 4 core complete all as specified and as directed. |
| 8 | Supply and laying for tubes Medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 15 mm dia bore complete all as specified and as directed. |
| 9 | S&F for Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and as directed. |
| 10 | S&F for 15mm bore Bib tap fancy type chromium plated with long shank complete all as specified and as directed. |
| 11 | Supply and fixing for Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for MCB Distribution board double door type SPN 2 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. |
| 13 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with 200 Amp rated copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. |
| 14 | Supply and fixing for MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 15 | Supply and fixing for MCB SPN 6-32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 16 | Material and labour for (concelaed Type) point wiring for one 3 pin socket outlet 15 Amps on the Independent board including necessary chases cutting of wall PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by 2.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit not less than 20mm dia medium grade with all accessories and sunk modular GI box for mounting of fittings like switch, socket with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge |
| 17 | Supply, install,commissioning and testing of commercial Air curtain unit for size 4 feet prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of stainless steel sheet square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door Opening complete all as specified and as directed. |
| 18 | Supply, erection and fixing of 7 meter high Hot Dip Galvanised (HDG) Octagonal pole with top dia 70mm and bottom dia 130 mm with pole shaft thickness of 3 mm, base plate 200mmx200mm x12mm thick, hole dimentation 24X32mm, with and including single arm bracket 70mm dia of 1000mm long with 4 Nosx 20mm dia foundation bolts 600mm long, Projects Bolt length 100 mm long, EN8 grade of size M20x600mm long J type, with three phase connector block complete all as specified and as directed. |
| 19 | Supply and fixing in replacement of LED street light fitting 60 Watts, IP 66, having pressure die cast aluminium alloy housing with heat resistant with individual peanut LED lenses and Driver shall be IP-66 for water protection, including surge protection device 5 KV including fixed to bracket with clamps, nuts, bolts, washers etc complete all as per specified and as directed. |
| 20 | Supply and fixing three core FRLSH PVC insulated stranded aluminium conductor cable of size 2.5 sq mm, 1100 volts grade ISI marked complete all as specified and directed. |
| 21 | Excavation in trenches, not exceeding 1.5 m wide and n. exc 1.5 m in depth for laying of cable for soft/ loose soil and getting out all as specified. |
| 22 | Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm apart for soft/loose soil all as specified. |
| 23 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point. |
| 24 | M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed.Note: Punned thickness shall be considerd for measurment purpose |
| 25 | M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable for protection of electric cable all as specified and directed. |
| 26 | Supply, laying & testing XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 volts grade of size 120 Sqmm 3.5 core complete all as specified and as directed. |
| 27 | Supply and laying or fixing or passing through pipe, LT XLPE insulated armured heavy duty cable 1100 volt grade ISI marked with aluminium conductor multi stranded cross sectional area 16 Sqmm 4 core including taking out old LT cable of size 2 Core 10 Sqmm from its position complete all as specified and directed. |
| 28 | M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit of size not less than 20mm dia with conduit accessories complete all as specified and as directed. NOTE:- Two runs of 4 Sq mm + one run of 4 sq mm and one run of PVC conduit 20mm dia and its accessories of suitable size shall be measured as one unit length. Please Enable Macros to View BoQ information |
| 29 | M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit of size not less than 20mm dia with conduit accessories complete all as specified and as directed. NOTE:- Two runs of 4 Sq mm + one run of 4 sq mm and one run of PVC conduit 20mm dia and its accessories of suitable size shall be measured as one unit length. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender