Tender For Special Repair To Bldg No T-36 (Mt Pl) Of 85 Fd Wksp, Addn/Altn To Bldg No T-35 Bcd In ‘N Zone, Provn Of 01 X Combined Toilet Bathroom For Stn Masjid, Special Repair To Bldg No P-434 (Gd Room) Near Tcp-2 & Provn Of Tiling Work & Kote Stone
Tender Value
48 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
19 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-36 (Mt Pl) Of 85 Fd Wksp, Addn/Altn To Bldg No T-35 Bcd In ‘N Zone, Provn Of 01 X Combined Toilet Bathroom For Stn Masjid, Special Repair To Bldg No P-434 (Gd Room) Near Tcp-2 & Provn Of Tiling Work & Kote Stone At Stair Case Of Bldg No P-477 At Czw At Rms
BOQ
| Sl. No. | Item Description |
| 1 | M&L for non skid ceramic coloured tiles 8 to 9 mm thick, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floor, etc set and jointed in neat cement slurry over and including cement screed 15 mm thick in cement mortar (1:6) and pointed in white or coloured cement to match the shades of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for non skid ceramic coloured tiles 8 to 9 mm thick, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floor, etc set and jointed in neat cement slurry over and including cement screed 15 mm thick in cement mortar (1:6) and pointed in white or coloured cement to match the shades of tiles complete all as specified and as directed. |
| 3 | M & L for non skid tiles 8 to 9mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm on vertical surfaces such as skirting, dado risers to steps over and including 10 mm thick bedding layer / backing coat in cement mortar (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 4 | M & L for non skid tiles 8 to 9mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm on vertical surfaces such as skirting, dado risers to steps over and including 10 mm thick bedding layer / backing coat in cement mortar (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 5 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper including dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and as directed. |
| 6 | M&L for second class hardwood as in scantlings clean sawn timber fixed incuding dismantling of old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. |
| 7 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) complete all as specified and as directed. |
| 8 | Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed. |
| 9 | M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed. |
| 10 | S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 11 | S & F 100 size stainless steel butt hinges complete all as specified and directed |
| 12 | S&F Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long complete all as specified and as directed. |
| 13 | S&F Aluminium handle cast type anodised 150 mm long complete all as specified and as directed. |
| 14 | S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long)complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 15 | S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long)complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender