Tender For Provn Of Parking Shed For Mt Veh Of 39 Inf Dou At Alhilal Mil Stn.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Sep 2026
9 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Parking Shed For Mt Veh Of 39 Inf Dou At Alhilal Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (Unreinforced) in ground floor and pavings n.exc 15cm thick ness (below or above ground level) and disposal of debries outside the premises.completes all as specified and directed. |
| 2 | Excavating in trenches, n.exc 1.5 m wide and exc 1.5 m in depth, for foundation, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 3 | All as per Item no. 2 above but for each additional 1.5m or part thereof in depth beyond the first 1.5 mtr and n.exc 3.0mtr and getting out in any type of soil complete all as specified and directed. |
| 4 | M&L for Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), as in foundation, filling and mass concrete complete all as specified and directed. |
| 5 | M & L for Formwork to sides of rough finished flat surfaces sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or batter complete all as specified and directed. |
| 6 | M & L for Formwork to sides of rough finished surfaces square/rectangular surfaces of concrete pillars, posts, struts, piers, columns and stanchions completes all as specified and directed. |
| 7 | M & L for Formwork to sides of rough finished flat surfaces sides of concrete sides and soffits of or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc.completes all as specified and directed. |
| 8 | M & L for TMT bar 10 mm and over cut to length, bend to shape required including cranking, bending spirally for hoopings for cols. hooking ends and binding with ad including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 9 | M & L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 10 | M&L for Brickwork with sub class 'B' (old) size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 completes all as specified and directed. |
| 11 | M & L for Rendering 10 mm thick CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed |
| 12 | M & L for Rendering 15 mm thick in two coats in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directedNote :- Water proofing liquid compound shall be measured and paid separately |
| 13 | Material & labour for Rendering 5 mm thick CM 1:3 on concrete surfaces of beam/column finished even & smooth without using extra cement complete all as specified and directed. |
| 14 | Material & labour for Rendering 5 mm thick CM 1:3 on soffit of concrete surfaces finished even & smooth without using extra cement complete all as specified and directed |
| 15 | Supply only liquid water proofing liquid all as specified and directed. |
| 16 | M & L for Preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed. |
| 17 | Material & Labour for preparation of newly pastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm, complete all as specified and directed. |
| 18 | M & L for Peparation of newly plastered surfaces of soffits of concrete surfaces and applying two coats of white wash ,complete all as specified and directed. |
| 19 | M&L for RCC ( design mix ) type M-25 (20 mm graded agg) as in Foundations, including rafts, footings, foundation beams, plinth beams, complete all as specified and directed. |
| 20 | M&L for RCC ( design mix ) type M-25 (20 mm graded agg) as in roof beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and directed. |
| 21 | M & L for RCC (design mix ) type M-25 (20 mm graded agg) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 22 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws completes all as specified and directed. |
| 23 | M&L for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws completes all as specified and directed. |
| 24 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410 -W (Grade E- 250) complete all as specified and directed |
| 25 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed |
| 26 | S&F for Mild steel rag or lewis bolts, Diameter of neck 20mm, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewiseged length of bolt exc 15cm and n.exc 30cm long complete all as specified and directed. |
| 27 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer completes all as specified and directed. |
| 28 | M&L for hard core of broken stone or boulders of guage n.exc, 63mm, deposited, spread and levelled in layers n.exc, 15 cm thick, watered and rammed to a ture surface completes all as specified and directed. |
| 29 | M&L for 75mm thick Plain Cement concrete (1:3:6) type C2 using 40mm graded aggregate as in sub base below floors complete all as specified and directed. |
| 30 | M&L for 75mm thick PCC (1:1:5:3) type A1 using 20mm graded stone aggregate as in floor finished even and smooth without using extra cement casted in panels complete all as specified and directed |
| 31 | M & L for providing 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement casted in panels completes all as specified and directed. |
| 32 | Writing letters or figures (Block, Roman, Italic or Indian) n.exc. 30 cm high on walls completes all as specified and directed, incl obliterating old writing of any description with paint to match existing work. |
| 33 | M & L for Plain cement concrete, 1:2:4: type B-1 (using 20 mm graded crushed stone aggregates) as in surface channels or drains etc., complete all as specified and directed |
| 34 | M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped end etc.completes all as specified and directed. |
| 35 | Providing PCC 1:2:4 Type B-1 using 20mm crushed stone aggregate in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneellers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 36 | Returning filling in with approved excavated earth, incl spreading leveling, watering and well ramming in layers n.exc 25 cm thick with soft loose soil complete all as specified and directed. |
| 37 | Removing excavated material/soil to a distance exe 250m and not exc 500m and depositing where directed.completes all as specified and directed. Please Enable Macros to View BoQ information |
| 38 | Removing excavated material/soil to a distance exe 250m and not exc 500m and depositing where directed.completes all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender