Tender For Addition/ Alteration And Special Repairs To Kitchen Cabinet, Cupboard, Floor Of Balcony, Wc And Bathroom In F Building At Old Navy Nagar, Under Ge (Nw) Navy Nagar, Colaba, Mumbai
Tender Value
30.66 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
14 days left
EMD
61400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Special Repairs To Kitchen Cabinet, Cupboard, Floor Of Balcony, Wc And Bathroom In F Building At Old Navy Nagar, Under Ge (Nw) Navy Nagar, Colaba, Mumbai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Aug-2026 | Corrigendum | Other | 01-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Resecuring or easing and adjusting and finally refixing the shutters into the same opening after taking down wooden shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engg-In- Charge |
| 2 | Cutting and carefully removing the damaged portion of the existing wooden door frame (chowkhat) up to 300 mm height from the bottom on both sides, taking necessary precautions to retain the sound portion of the frame intact, including disposal of unserviceable material as directed; providing and fixing WPC (Wood Plastic Composite) door frame in place of the removed portion, of required size and section (45 × 85 mm) colour matching with existing frame, manufactured from virgin PVC polymer of K-value 58–60 (suspension grade) blended with calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index 12 for 100 g), fabricated with mitered joints using PVC solvent cement and mechanically fastened with full body threaded star-headed stainless steel screws, having minimum frame density of 750 kg/m³, screw withdrawal strength of 2200 N (face) and 1100 N (edge), minimum compressive strength of 58 N/mm², modulus of elasticity 900 N/mm² and conforming to Class A flame spread category, the frame being termite/borer proof, water and moisture resistant and fire retardant; fixing the frame in proper alignment, level and plumb, duly connected with the existing frame using suitable fasteners, screws and adhesives, including sealing of joints, finishing and making good the adjoining surfaces complete in all respects as per the direction of the Engineer-in-charge. |
| 3 | Cutting and carefully removing the damaged portion of the existing wooden door frame (chowkhat) up to 300 mm height from the bottom on both sides, taking necessary precautions to retain the sound portion of the frame intact, including disposal of unserviceable material as directed; providing and fixing WPC (Wood Plastic Composite) door frame in place of the removed portion, of required size and section (65 × 125 mm) colour matching with existing frame, manufactured from virgin PVC polymer of K-value 58–60 (suspension grade) blended with calcium carbonate, natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index 12 for 100 g), fabricated with mitered joints using PVC solvent cement and mechanically fastened with full body threaded star-headed stainless steel screws, having minimum frame density of 750 kg/m³, screw withdrawal strength of 2200 N (face) and 1100 N (edge), minimum compressive strength of 58 N/mm², modulus of elasticity 900 N/mm² and conforming to Class A flame spread category, the frame being termite/borer proof, water and moisture resistant and fire retardant; fixing the frame in proper alignment, level and plumb, duly connected with the existing frame using suitable fasteners, screws and adhesives, including sealing of joints, finishing and making good the adjoining surfaces complete in all respects as per the direction of the Engineer-in-charge. |
| 4 | Taking down chowkhat and frame with shutters ( without taking off shutters from the frame ) exc. 1.5 sqm and not exc. 4.0 sqm each complete all as specified and directed by Engg-In- Charge |
| 5 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engg-In- Charge. |
| 6 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engg-In- Charge. |
| 7 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorativetype flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 9 | Supply & Fixing of 18 mm thick Celuka ply of one side Prelam and other side plain density 650 Kg/Cum white colour to make kitchen cabinet and cupboard Shutter/ drawer Front shutters in double panel complete as per specifications and as directed |
| 10 | Supply & Fixing of factory made 5mm thick PVC sheet fixed with screws, solvent cement/ adhesive for backing of cup boards and bathroom/kitchen cabinets etc.complete as per specifications and as directed |
| 11 | Supply & Fixing of 18 mm thick Celuka ply of Plain colour density 650 Kg/Cum fixed with screws, solvent cement/ adhesive to make kitchen cabinet and cupboard sides top and bottom and shelves inside the cabinets complete as per specifications and as directed |
| 12 | Supply and fixing 100 mm SS butt hinges fixed with SS screws complete all as specified and directed by Engg-In- Charge. |
| 13 | S & F Continuous (piano) hinges ( width of flap with open 30 mm), mild steel, bright finish or electrogalvanised complete as per specifications and as directed |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposal of debris out side the MoD land etc complete all as specified and directed by Engg-In- Charge. |
| 15 | Material & Labour for coloured glazed ceramic tiles in vertical surface 300x450x7 to 8mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge. |
| 16 | Material & Labour for coloured joint free ceramic tiles with light shade of size 600mmx600mmx10mm thick in floors over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge. |
| 17 | Ditto all as per item No 16 above but as in skirting over & including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In- Charge. |
| 18 | M&L Non - skid coloured ceramic tiles 7 to 8 mm thick of size area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors over and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match (Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate). |
| 19 | Demoliton of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded and pointed in any mortar complete as per specifications and as directed |
| 20 | M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust complete all as specified and directed by Engr in charge |
| 21 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite. |
| 22 | Supply and fixing 125 mm size extruded aluminium alloy handles, fabricated type anodised fixed with SS screws complete all as specified and directed by Engg-In- Charge. |
| 23 | Providing and fixing bright /matt finished Stainless Steel handles 125 mm with plate size 175*32 mm of approved quality & make with necessary screws etc all complete |
| 24 | Providing and fixing magnetic catcher double strip ( horizontal type) of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 250 mm fixed with SS screws complete all as specified and directed by Engg-In- Charge |
| 26 | Supply and fixing 200 mm long aluminium anodized barrel tower bolts of extruded section fixed with SS screws complete all as specified and directed by Engg-In- Charge. |
| 27 | Supply and fixing 150 mm long aluminium anodized barrel tower bolts of extruded section fixed with SS screws complete all as specified and directed by Engg-In- Charge. |
| 28 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. |
| 29 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 30 | M&L for 75mm thk cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes all as specified. |
| 31 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground out of the MoD as per direction of Engineer-in-Charge. |
| 32 | S&F Machine Pressed precast concrete interlocking paver block of 60 mm thick M-35 Grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed. |
| 33 | M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping/kerbs including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge. |
| 35 | Material and labour for Prepararing old surfaces plastered or unplastered by Washing, rubbing down and stopping of distempered and painted surfaces of wall. Complete all as specified and directed. |
| 36 | M & L plaster for applying two coats of oil bound distemper over a coat of Priming plastered and other surfaces with alkali resistant priming paint including 2mm thick wall care putty in new plastered wall surface complete all as specified and directed. |
| 37 | Material and labour for post construction anti termite treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and as directed by Engineer-in-charge. |
| 38 | Material and labour for post construction anti termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-in-Charge. |
| 39 | Dismantling and carefully taking out existing kitchen cabinet and cupboard /wardrobe incl wall mounted and floor mounted units, shutters,shelves,drawers ,frames,runners,hinges,handles etc and without damaging adjoining walls,flooring and services incl disposal of material ,debris out of the station directed by Engr-in-charge.( Superficial area shall be measured). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender