Tender For Repair/ Painting/ Polishing Of Steel And Map Furniture At Kanchrapara Mil Stn Under Ge Barrackpore
Tender Value
25 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Painting/ Polishing Of Steel And Map Furniture At Kanchrapara Mil Stn Under Ge Barrackpore
BOQ
| Sl. No. | Item Description |
| 1 | RECANNING OF CHAIR VARANDAH WITH CANE PLASTIC (DRG NO.FD-19, FD-256):- |
| 2 | Removing of existing old unserviceable cane plastic from chair verandah and recanning the same with new cane plastic (white colour) 6mm width of approved quality including painting with synthetic enamel paint white all as shown on drawing. |
| 3 | REPAIR OF ALMIRAH LARGE AND MEDIUM STEEL (DRG NO.FD-67, FD-1032, FD-1033, FD-1031, FD-1034):- |
| 4 | LEGSS&F for new leg made out from MS sheet 1.6mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting by the spray gun after removing of each old worn out legs from its existing portion of Almirah large steel with shelves and Almirah medium steel with shelves and replace the same complete all as specified and directed and as shown on drawing. |
| 5 | HANDLESS&F for new handle made out from mild steel over chromium plated of size 150mm size and weight of each handle should not be less than 185gm of existing pattern after removing of old unserviceable/ broken handle from its existing position of almirah large steel with shelves and almirah medium steel with shelves and replace same complete all as specified and directed and as shown on drawing. |
| 6 | LOCKSS&F for new brass, six lever (Make : Godrej) lock with steel CP duplicate keys, weight of each lock should not be less than 260gm after removing of old unserviceable lock from its existing position of almirah large steel with shelves and almirah medium steel with shelves and replace same complete all as specified and directed and as shown on drawing. |
| 7 | SHELVES FOR ALMIRAH LARGE WITH SHALVES STEEL (Drg No. FD-67(M), FD-1031 & FD-1032).S&F for new shelf made out of MS Sheets of 1.00mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting by spray gun after removing of old worn out shelf from its existing portion of almirah large steel with shelves and replace same complete all as specified and directed and as shown on drawing. |
| 8 | REPAIR OF CHARPOY GI PIPE (DRG NO.FD-220 AND BKP/TD/168) :- |
| 9 | LEGSM&L for 32mm bore (medium grade) GI tubing leg (ISI marked) of charpoy after removing of old unserviceable leg of charpoy GI pipe from its existing position all as shown on drawing. |
| 10 | LONG RAILM&L for 32mm bore (medium grade) GI tubing of long rail (ISI marked) size of 1884 mm long of charpoy GI after removing of old unserviceable long rails of charpoy GI pipe from its existing position all as shown on drawing cut to required length of and threading at both ends all as shown on drawing. |
| 11 | SHORT RAILM&L for 32mm bore (medium grade) GI tubing of short rail (ISI marked) cut to required length of 900 mm long and threading at both ends all as shown on drawing. |
| 12 | ELBOW GIM&L for 32mm bore 3 way GI elbow weight of each GI elbow should not less than 480gms as per ISI specification all as shown on drawing. |
| 13 | PLY TOP 12MM THICKS&F for 12mm thick BWR grade, type BB, both sides commercial ply wood (7 Nos of ply) with 6mm thick well seasoned teak wood duly polished found at round the edging of the top and beading required 4mm dia 65mm long counter shank machine nut, bolt, washer on top including removing of existing top all as directed by Engineer- in -charge. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved) |
| 14 | REPAIR OF CHAIR CB STEEL WITH ARMS [DRG NO.FD-75(M)]:- |
| 15 | WOODEN FRAME SEATS&F for canned with wooden seat frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed seat frame from existing portion from chair CB steel with arm as replaced all as directed and shown on drawing. |
| 16 | WOODEN FRAME BACKS&F for canned with wooden back frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed back frame from existing portion from chair CB steel with arm as replaced all as directed and shown on drawing. |
| 17 | WOODEN ARM FOR CHAIR CB STEEL WITH ARMSS&F for new arm made out from well seasoned teak wood and apply two coats of black polish including removing broken arm from its existing portion of chair CB steels with arm all as directed and shown on drawing. |
| 18 | STIFFENER FOR CHAIR CB STEEL WITH ARMS&F for new MS flat of stiffener size 520mmx15mmx4mm by welding including two coats of synthetic (Olive Green) paint over one coat of red oxide zinc chrome primer including removing of old worm out MS cleat from its existing position from chair CB steel with arm complete all as directed and shown on drawing. |
| 19 | REPAIR OF CHAIR CB STEEL WITH OUT ARMS [DRG NO.FD-75(M)] |
| 20 | WOODEN FRAME SEATS&F for canned with wooden seat frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed seat frame from existing portion from chair CB steel without arm as replaced all as directed and shown on drawing. |
| 21 | WOODEN FRAME BACKS&F for canned with wooden back frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed back frame from existing portion from chair CB steel without arm as replaced all as directed and shown on drawing. |
| 22 | STIFFENERS&F for new MS flat of stiffener size 420mmx15mmx4mm by welding including two coats of synthetic (Olive Green) paint over one coat of red oxide zinc chrome primer including removing of old worm out MS cleat from its existing position from chair CB steel without arm complete all as directed and shown on drawing. |
| 23 | REPAIRS TO TABLE OFFICE CLERK STEEL (DRG NOFD-84, FD-381, FD-1004):- |
| 24 | LEGRemoving of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing. |
| 25 | DRAWERRemoving of old unserviceable drawer from its existing position and replace the same with new drawer made out of 20 gauge MS sheet all as shown on drawing. |
| 26 | LOCK & KEYSRemoving of old unserviceable lock of table office clerk steel and supply and fixing with new brass six lever Godrej pattern lock with steel CP duplicate keys all as shown on drawing.(Make : Godrej/Link as approved.) |
| 27 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18mm thick veneered particle board (exterior grade), grade-I quality, with commercial veneers on both sides with 1.00mm thick plastic laminated sheet (plain & wood grain)pasted over particle board with approved synthetic resin adhesive with 6mm thick well seasoned second class hard wood beading all-round the edging all as shown on drawing.(Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved) |
| 28 | REPAIRS TO TABLE OFFICE OFFICER STEEL (DRG NO.FD-84, FD-1003):- |
| 29 | LEGRemoving of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing. |
| 30 | DRAWERRemoving of old unserviceable drawer from its existing position and replace the same with new drawer made out of 20 gauge MS sheet all as shown on drawing. |
| 31 | LOCK & KEYSRemoving of old unserviceable lock of table office clerk steel and supply and fixing with new brass six lever Godrej pattern lock with steel CP duplicate keys all as shown on drawing. (Make : Godrej/Link as approved.) |
| 32 | TOPRemoving decayed top from its existing position and replace the same with new top made out from 18mmthick veneered particle board (exterior grade), Grade-I quality, with commercial veneers on both sides with 1.00mm thick plastic laminated sheet (Plain & wood grain) pasted over particle board with approved synthetic resin adhesive with 6mm thick well seasoned second class hard wood beading all-round the edging all as shown on drawing. (Make of particle board : Century Ply /Greenply/ National ply/Kit ply as approved) |
| 33 | REPAIRS TO TABLE DINING ORS STEEL (DRG NO.FD-165):- |
| 34 | LEGRemoving of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing. |
| 35 | TOPRemoving of decayed top from its existing position and replace the same with new top made out from 18mm thick veneered particle board (exterior grade), Grade-I quality, with commercial veneers on both sides with 1.00mm thick plastic laminated sheet (Plain & wood grain) pasted over particleboard with approved synthetic resin adhesive with 6mm thick well seasoned 1st class hard wood (Teak/Seasam) beading all-round the edging all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/ Kit ply as approved) |
| 36 | REPAIRS TO LOCKER STEEL (FD-1029):- |
| 37 | LEGSM&L after removing of each old worn out legs from its existing position of locker steel and replace the same by supply and fixing with new leg made out from MS sheet 1.6mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting, complete all as specified & directed and as shown on drawing. |
| 38 | HANDLES&F for 100mm long aluminium handle of existing pattern after removing of old unserviceable / broken handle from its existing position of locker steel complete all as specified and directed. |
| 39 | HASP & STAPLES&F for 75mm long hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with wood screw complete all as specified and directed. |
| 40 | REPAIRS TO CHARPOY FOLDING IP HARD TOP (DRG NO. FD/388(R)):- |
| 41 | TOPRemoving of old unserviceable top from its existing position and replace the same with new top of 9mm thick BWR phenoled commercial plywood (unpolished) cut into two pieces to facilitate folding of bed complete all as shown on drawing as directed by Engineer-in-charge.Make of plywood : Centuryply/ Greenply/ Nationply/ Kit ply as approved) |
| 42 | FLAT IRONRemoving of old unserviceable flat iron from its existing position and replace the same with new mild steel flat iron of size 220mmx60mmx32mm cut to shape and bent @150 to avoid fouling with leg complete all as directed shown drawings. |
| 43 | REPAIRS TO COMPUTER CHAIR/REVOLVING CHAIR WITH ARMS( DRG NO. TP & FD/E6/MAP/01):- |
| 44 | WHEELRemoving of old unserviceable revolving wheel from its existing position of computer chair and revolving chair and replace the same by supply and fixing with revolving wheel PVC 40mm to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 45 | HYDRAULIC SYSTEMRemoving of old unserviceable hydraulic system from its existing position of computer chair and revolving chair and replace the same by supply and fixing with new hydraulic system to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 46 | BASERemoving of old unserviceable base from its existing position of computer chair and revolving chair and replace the same by supply and fixing with new base to make completely fuctional rest all as shown on drawing or directed by Engineer-in-charge. |
| 47 | SEATRemoving of old unserviceable seat from its existing position of computer chair and revolving chair and replace the same by supply and fixing with new seat to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 48 | BACKRemoving of old unserviceable back from its existing position of computer chair and revolving chair and replace the same by supply and fixing new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 49 | ARMSRemoving of old unserviceable arms from its existing position of computer chair and revolving chair and replace the same by supply and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. |
| 50 | REPAIRS TO CHARPOY IP HARD TOP (DRG NO. FD/MAP-II/01):- |
| 51 | TOPRemoving of old unserviceable top from its existing position and replace the same with new top of 12mm thick BWR grade both sides commercial plywood (seven Nos of ply) complete all as shown on drawing as directed by Engineer-in-charge. |
| 52 | REPAIRS TO CHAIR SCHOOL WITH HAND BOARD (DRG NO.FD/E6/MAP/05):- |
| 53 | SEAT & BACKRemoving of old unserviceable seat & back from its existing position and replace the same with new seat & back made out of blow plast or equivalent approved by E-in-C’s Branch all as shown on drawing. |
| 54 | HAND BOARDRemoving of old unserviceable hand board from its existing and replace the same with new hand board made out from 18mm thick pre laminated particle board exterior grade-1 hinged at right hand side of chair arm screwed to 25mm dia MS pipe inserted in 20mm dia MS rod welded to frame . Standard PVC edging 1.6mm thick shall be provided all-round the hand board, rest all as shown in drawing. |
| 55 | BASKET(JALI)Removing of old unserviceable steel basket (Jali) from its existing position and replace the same with new basket (Jali) made of 6mm MS rod all as specified and shown on drawing. |
| 56 | REPAIRS TO CHAIR VERANDAH (DRG NO.FD/MAP-II/15):- |
| 57 | SEATRemoving of old unserviceable PVC seat from its existing position of chair verandah and replace the same by supply and fixing with new PVC seat 4mm thick and grooves 90X10mm 10 Nos on seat all as shown on drawing or directed by Engineer-in-charge.(Make:Brite/Cello/Supreme/Neelkamal/AMKO as approved) |
| 58 | BACKRemoving of old unserviceable back PVC back from its existing position of chair verandah and replace the same by supply and fixing with new PVC 4mm thick back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.(Make:Brite/Cello/Supreme/Neelkamal/AMKO as approved) |
| 59 | HARD RUBBERRemoving of each decayed hard rubber from its existing position of chair varandah and replace the same with new hard rubber all as shown on drawing and directed by Engineer-in-Charge. |
| 60 | PAINTINGS OF CHAIR VERANDAH M&L for applying spray painting two coats with synthetic enamel (white) paint over a coat of red oxide primer with spray gun after removing of existing old worn out paint by any means with proper treatment from chair verandah complete all as directed and shown on drawings. |
| 61 | RACK SHOE STEEL (DRG NO : FD/E6/MAP/02(R)):- |
| 62 | Supply & fixing for 25mm dia, 16 guage thick MS conduit pipe of required length/size to be fixed after with and including dismantling the damaged leg frame carefully without isturbing the adjoining parts of Rach shoe steel complete all as specified and as directed.(Note : Ref drawing No FD/E6/MAP/02) |
| 63 | Supply & fixing of 6 mm dia MS rod of required length/size to be fixed after with and including dismantling the damaged shelf (frame) carefully without disturbing the adjoining parts of Rach shoe steel complete all as specified and as directed.(Note : Ref drawing No FD/E6/MAP/02) |
| 64 | Supply & fixing for 3 mm dia MS rod of required length/size to be fixed after with and including dismantling the damaged shelf (mesh) carefully disturbing the adjoining parts of Rack shoe steel complete all as specified and as directed.(Note : Ref drawing No FD/E6/MAP/02) |
| 65 | Material and labour for preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and spplying putty wherever required and applying one coat of synthetic enamel paint of black shade of approved make & quality for rack shoe steel complete all as specified and as directed.(Note : Ref drawing No FD/E6/MAP/02) |
| 66 | REPAIRS OF TABLE BED SIDE (DRG NO : FD/E6/MAP/15(R)):- |
| 67 | TOPRemoving decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination. Standard PVC edging 1.6mm whick shall be provided all-around the top of table bed side all as shown on drawing. (Make of Plywood : Century ply/Green ply/National ply/ Kitply as approved) |
| 68 | BACKRemoving decayed each back of table bed side from its existing position and replace the same with new back made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade of required size all as shown on drawing.(Make of Plywood : Century ply/Green ply/National ply/ Kitply as approved) |
| 69 | DRAWERRemoving decayed drawer and replace the drawer made out from 12mm thick prelaminated particle board (exterior grade), grade-I quality, one side decorative of front, side and back, bottom shall be made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade of required size as approved by Engineer-in-Charge and rest all as shown on drawing.(Make of Plywood : Century ply/Green ply/National ply/ Kitply as approved) |
| 70 | HANDLES & F for 100mm aluminium handle of existing pattern after removing of old unserviceable / broken handle from its existing position complete all as directed and shown on drawing. |
| 71 | HARD RUBBER / PVC RINGRemoving of each decayed hard rubber / pvc ring from its existing position of Table bed side and replace the same with new hard rubber / pvc ring all as shown on drawing and directed by Engineer-in-Charge. |
| 72 | PAINTING TO FOLLOWING STEEL FURNITURE ITEMS AS DIRECTED BY ENGR IN CHARGE:-M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from following furnitures complete all as directed shown drawings. |
| 73 | PAINTING OF ALMIRAH LARGE WITH SHALVES STEEL (Drg No. FD-67(M), FD-1031 & FD-1032). |
| 74 | PAINTING OF ALMIRAH MEDIUM WITH SHALVES STEEL (Drg No. FD-67(M), FD-1031 & FD-1032). |
| 75 | PAINTING OF BOOK SHELF OPEN LARGE STEEL (DRG NO. FD-69) |
| 76 | PAINTING OF TABLE OFFICE CLERK STEEL (DRG NO FD-84) |
| 77 | PAINTING OF TABLE OFFICE OFFICER STEEL (DRG NO FD-84, FD-1003) |
| 78 | PAINTING OF CHAIR CB STEEL WITH ARMS [DRG NO.FD-75(M)] |
| 79 | PAINTING OF CHAIR CB STEEL WITH OUT ARMS [DRG NO.FD-75(M)] |
| 80 | PAINTING OF TABLE DINING ORS STEEL (DRG NO.FD-165):- |
| 81 | PAINTING OF LOCKER STEEL (FD-1029) |
| 82 | PAINTING OF CHARPOY IP HARDTOP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender