Tender For Holistic Development Of Drain No. 7 Waterbody (Spring Tank) In Ward No. 52
Tender Value
65.82 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
6 days left
EMD
65900
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Holistic Development Of Drain No. 7 Waterbody (Spring Tank) In Ward No. 52
BOQ
| Sl. No. | Item Description |
| 1 | 3/4 Mtr Decorative Pole |
| 2 | 1 Mtr Decorative Single Arm |
| 3 | 45 Watt Decorative LED Post top light |
| 4 | Making of foundation of size 2.5'x'x1' below the ground No 21 level and Ix1'x1' above the ground level with (1:4:8) black hard granaite CB chip of size 12mm including fixing of seramic wall tiles in the foundation above the ground level with wateing, curing complete with transportation, T&P, labour charges as per direction of engineer-in-charge. |
| 5 | Supply and fixing of following Almunium Service wire including G.1. Stay 5 wire ISI marked. (Make- Polycab/v-Guard/Mahavir/ Or equivalent)2.5 sq.mm |
| 6 | Supply of following PVC Aluminium armoured XLPE cables insulated IS marked. (Make- Havells/Polycab/KEI N-Guard/Gloster/ Or equivalent)(a) 4cx16sqmm |
| 7 | Supply & laying of 40 mm HDPE pipe for insert of cable laying. |
| 8 | Laying of one number of PVC insulated and PVC sheathed /XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 9 | Supply & installation of electronic Timer ON/OFF switch for automatic street light control with box (40/70 Amp contactor L&T make). |
| 10 | Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia 10 ISI marked including accessories and providing masonary with charcoal and salt as required |
| 11 | Supply and fixing 8 watt LED Lawn cone type light fitting (Make havells/phillips/cropmtion) |
| 12 | Design, Supply, Installation, Testing and Commissioning (DSITC) of 10 KLD Decentralized Faecal Sludge Wastewater Treatment System (R3H2O-fully automatic) including tanks, treatment units, filtration/polishing system, pumps, blowers, automation control panel, pipelines, electrical fittings and all allied civil, mechanical and electrical components complete. The system shall treat and recycle blackwater from public toilets with treated effluent quality COD ≤ 30 mg/L and low turbidity, enabling reuse/ZLD as applicable. The scope includes transportation, erection, trial run, commissioning and comprehensive warranty for satisfactory functioning of the entire system for 2 years. |
| 13 | Earth work excavation in all kinds of soil for foundation within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bed as per the specification approved by the department and direction of Engineer-in-charge |
| 14 | Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engineer in charge. |
| 15 | Cement Concrete (1:3:6) with 4cm size Hard Granite Crusher Broken metal including all cost, conveyance, royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engineer-in-charge. |
| 16 | R.C.C M-25 with 20mm size Crusher broken chips including all cost,conveyance, royalty & taxes etc.compete of all materials to work site as perspecification approved by the department & direction of Engineer in charge |
| 17 | Supplying fitting & placing uncoated HYSD reinforcement including cutting,bendind binding & placing the steel rods as per drawing & technical specification approved by the department with cost of binding wire 18 to 20 gauge. |
| 18 | Rigid Smooth centerinmg and Shuttering including false work and removing the same after casting etc.complete. |
| 19 | Design, Supply, Installation, Testing and Commissioning of Floating Sprinkler Acration System (Fountain Type) for pund scration and improvement of water quality, including floating platform, pump set, fountain jet/sprinkler arrangement for spraying water through jets, electrical control panct, mooring arrangements, power cables, pipelines and all allied mechanical and electrical components complete. The system shall enhance dissolved oxygen and control eutrophication with an effective coverage up to I acre per unit. The scope includes transportation, erection, trial run, commissioning and comprehensive operation and maintenance of thecomplete system for 2 years |
| 20 | Earth work excavation in hard soil with initial lead of 0.50 m and initial lift 20 of 1.5m and laying in layers not exceeding to 0.30 m and breaking clods and as per direction of E-I-C |
| 21 | Re-filling of excavated earth in foundation etc comp. |
| 22 | Conveyance of excavated earth by mechanical means within 5 km lead etc. complete |
| 23 | Providing & laying P.CC. (148) using 4 cm. size ILG. (CB) metal including the cost of 23 all materials, labour carriage, royalty T& P and all Taxes các complete as per direction of EIC |
| 24 | Fly ash brick masonry in CM. (1:4) in Superstructure using 25cm x 12cm x 8cm 24 brick having crushing strength not less than 75 Kg/cm2 (Sub-Structure foundation and plinth) |
| 25 | Fly ash brick masonry in C.M. (1:6) in Superstructure using 25cm x 12cm x 8cm 25 brick having crushing strength not less than 75 Kg/cm2 (Super structure) |
| 26 | Providing 12 mm thick CP(1:4) to out side smooth surface etc, complete |
| 27 | 16mm thick CP. in CM (1.6) over Brick surface including close deep cheaping & slurry treatment including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of EIC |
| 28 | Providing 6 mm thick CPY14) over RCC surface etc. complete |
| 29 | supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) 29 (1 cement. 4 Course sand) and filling joints with white cement of approved quality including cast, conveyance, taxes, cost of all labour ete. complote. (Data for 10 sqm) |
| 30 | Fixing Ceramic wall tiles in dados, skirting and risers of steps on 12mm CP (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles |
| 31 | 2.50 cm thick grading concrete using CC (122) on roof slab with 6mm sizes down graded H.G. chips on new work (For 1 Sqmt) |
| 32 | Lintel |
| 33 | Supplying, fitting of openable UPVC doors with door frame of approved make with 33 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 34 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 34 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm 0.90mti. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows |
| 35 | Fixing Granite tiles(0 10sqm to 0.40sqm) in floors, treads or steps and landing over 25mm bed of CM (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding the cost of pre-cast tiles |
| 36 | Painting two coats with weather seal coat over a coat of water bound wall primer |
| 37 | supplying and filling good quality earth |
| 38 | Trees |
| 39 | Internal (PH)Providing and fixing of UPVC pipes (grade similar to ASTM standard) on the surface with proper clamping system, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes 39 jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 25mm dia |
| 40 | 32mm dia |
| 41 | Supplying all materials, labour, T&P & fitting and foung of following different water supply fittings with all necessary jointing materials etc all complete as per direction of Engineer-in-charge 25mm dia Brass valve |
| 42 | Supplying all labour. T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & 12 fitting in grooves, testing the pipe line against the leakage & filling the grooves with CM (1.4) to bring the surface to the original level including the cost of the machine, conveyance etc all complete as per the direction of Engineer-in-charge |
| 43 | Supplying all materials labour, T&P and cutting holes through existing Nos brickwork including supply of all materials & making good the damages for 43 taking UPVC pipes and fittings etc all complete as per PH specification and direction of the EICFor 15mm to 50mm UPVC pipe to pass in 110mm to 230mm thick wall |
| 44 | Providing and fixing of White Vitreous china under counter Wash basin with Nos over flow without tap plat form over all size 560x430x195mm including the cost and fitting charge etc. all completo as per PHE specification and the direction of Engineer-in-charge. |
| 45 | Providing & Fixing Wash Down Water Closet (AIWC pan) with integral 'P' trap inclusive of ciestren,scat cover all complete set conforming to IS 2556: 45 Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) ete all complete as per specification. |
| 46 | Supplying all materials, labour, taxes, T & P and fitting & fixing of different water supply CP on Brass or GM concealed fitting and fixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required 46 and directed including testing and rectification of defects after testing, including all cost of labour, materials, conveyance, loading, unloading, T&P etc. all complete as per direction of Engineer-in-charge. 15mm dia c. p. swan neck Pillar cock with spout |
| 47 | 2 way bib cock |
| 48 | Angular stop cock |
| 49 | C.P Extension piece 15mm |
| 50 | Providing & fixing of 5mm thick mirrior of super quality Bath Room Mirror 600 x 600 mm |
| 51 | 32mm x 800mm long pve corrugated waste pipe Please Enable Macros to View BoQ information |
| 52 | 32mm x 800mm long pve corrugated waste pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender