Tender For Electrification Work Of Potdar Sankul At Savitribai Phule Pune University (2026-27)
Tender Value
14.86 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
15000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrification Work Of Potdar Sankul At Savitribai Phule Pune University (2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and erecting HMS PVC conduit FRLS grade 25mm dia.with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. |
| 2 | Supplying and erecting HMS PVC conduit FRLS grade 32mm dia.with PVC accessories on wall / ceiling as per specification No: WG-MA/CON. |
| 3 | Supplyingand erecting PVC trunking(PVCcasing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 4 | Supplyingand erecting PVC trunking(PVCcasing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 5 | Supplying and erecting PVC box trunking of size 50x50mm. With accessories on wall/ceiling as per specification No: WG-MA/BOX. |
| 6 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Busbars or any other places as per specification No: WG-MA/BW |
| 7 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Busbars or anyother places as per specification No: WG-MA/BW |
| 8 | Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Busbars or any other places as per specification No: WG-MA/BW |
| 9 | Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVCinsulated wire laid in providedconduit/trunk ing/insidepole/Busbars or any other places as per specification No: WG-MA/BW |
| 10 | Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/ inside pole/Busbarsor any other places as per specification No: WG-MA/BW |
| 11 | Supplying and erecting mains with 3*4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Busbarsor any other places as per specification No: WG-MA/BW |
| 12 | Supplying and erecting PVC insulated PVC round sheathed 1.5sq.mm(30no.x 0.25mmdia.)3core flexible multistranded copper Industrial cable for voltagegrade up to 1.1 kV |
| 13 | Supplying and erecting PVC insulated PVC round sheathed 2.5sq.mm(30no.x 0.25mmdia.)3core flexible multistranded copper Industrial cable for voltagegrade up to 1.1 kV |
| 14 | Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base6A. erected on filled polypropylene board or polished double wooden block/PVC junction box. |
| 15 | Supplying and erecting modular type switch 6A/10A duly erected on provided plate and box with wiring connections complete. |
| 16 | Supplying and erecting modular type switch 16/20A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 17 | Supplying and erecting modular type 3pin 6/16Amulti socket with safety shutter, duly erected on provided plate and box withwiring connectionscomplete. |
| 18 | Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connectionscomplete. |
| 19 | Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 20 | Supplying and erecting modular type (twomodule) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 21 | Supplying and erecting modular type blanking plate one module,duly erected on provided plate & box. |
| 22 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected. |
| 23 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. |
| 24 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. |
| 25 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected. |
| 26 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 8 module duly erected. |
| 27 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected. |
| 28 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 16/18 module duly erected. |
| 29 | Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 30 | Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing andrequired accessories as per specification No: WG-PW/SW |
| 31 | Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 32 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG PW/CW |
| 33 | Refilling the holes for dismantled point wiring with cement mortar & finishing. |
| 34 | Supplying and installing cat-6 cable suitable for net working as per specification no. WG-COC/NC |
| 35 | Supplying,fixing,and configuring 24 ports,POE switch in provided rack as per specification No. WG-WC/ENS |
| 36 | Supplying and fixing tool-less IO (Ethernet) lush/surface type in provided modular box as per specification no. WG-NAS/IO |
| 37 | Supplying and fixing 12U wall mount rack (Dimension-DxWxH– 500x600x635 mm) as per specification No. WG-NAS/RAK |
| 38 | Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc.complete as per specification No: WG-DM/PW |
| 39 | Dismantling the existing Telephone / LAN / WAN / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW |
| 40 | Dismantling the existing aluminium/copper mains, sub-mains wiring upto 10 sq.mm. along with accessories etc. complete as per specification No:WG-DM/PW |
| 41 | Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 yearswarranty. |
| 42 | Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95,operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs.at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. |
| 43 | Supplying and erecting integrated LED street light fitting 40 to 50W IP65 &IK08 class having single piece pressure die-cast aluminium housing, havingsystem lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W,CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V,inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 44 | Supplying and erecting integrated LED flood light fitting Max. 100W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with Ushaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 45 | Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ classG.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm diaduly welded with provided leads as per specification no. FG-BKT/BPC |
| 46 | Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles1200 mm, max. energy consumption of 28W having service ratio (CMM/W)of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speedregulator, Temperature Rise of Max. 40 deg. C, having external mounted controlPCB completely erected in position as per specification no. FG-FN/CF |
| 47 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. |
| 48 | Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. |
| 49 | Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original. |
| 50 | Dismantling of existing fluorescent fittings of any type & size |
| 51 | Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear. |
| 52 | Supplying & erecting single phase, 240V, street light control panel up to the max load of 12kW, SPN MCB 63A, powder coated CRCA 14 SWG sheet,outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, controlwiring, metering device, etc. for automatic operation & overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation |
| 53 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 54 | Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 55 | Supplying, erecting & marking FPMCB 6A to 32A, with rated short- circuit breaking capacity (Icn) 10kA in provided distribution board as per specificationno. SW-SWR/MCB |
| 56 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short- circuit breaking capacity (Icn) 10kA in provided distribution board as per specificationno. SW-SWR/MCB |
| 57 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 58 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB |
| 59 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 60 | Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixedmagnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstandcapacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 61 | Supplying and erecting terminal spreaders suitable for 4 pole, above 100 A up to 250A MCCB (set of 8) |
| 62 | Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (set of 8) |
| 63 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB. |
| 64 | Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame |
| 65 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting,bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamelpaint complete.(panel body work) |
| 66 | Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match theswitchgears or as per directions by the authority.(for panel stand work) |
| 67 | Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface ofpanel / cupboard |
| 68 | Supplying and erecting bus bar chamber triple pole with neutral with fouraluminium bars, 500V 400A having 50mm (Width) X 5 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A persq. mm. compliance to IS 5082 and enclosure fabricated with 16 SWG CRCAsheet and epoxy paint, with suitable number of ways and with SMC/DMCInsulators and accessories of suitable rating complete as per specification no. CPBB |
| 69 | Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected toCTs |
| 70 | Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. |
| 71 | Supplying & erecting LED type indicating pilot lamp with LED colours red /yellow / green, 230 / 250V on provided box / panel with necessary material,wiring & connections etc. |
| 72 | Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc |
| 73 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductorcomplete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 74 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 75 | Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories. |
| 76 | Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq.mm. |
| 77 | Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the resultsSpecification no. EA-MOBI |
| 78 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall paintedwith bituminous paint with joints required. As per specification no EA-EP. |
| 79 | Providing and back filling ground enhancing compound 25 kg bag complete. |
| 80 | Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standardlength with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete. |
| 81 | Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR |
| 82 | Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100Kilogram). |
| 83 | Providing and making second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /inplinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 84 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 85 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender