Tender For Construction Of 05 No. Medium Deep Piezometers At Various Blocks Of Distt. Ambedkar Nagar Of Division- Ayodhya.
Tender Value
14.81 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
17 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambedkar Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 05 No. Medium Deep Piezometers At Various Blocks Of Distt. Ambedkar Nagar Of Division- Ayodhya.
BOQ
| Sl. No. | Item Description |
| 1 | ESTIMATE FOR Construction of 05 No. Medium Deep Piezometers at various Blocks of Distt.Ambedkar Nagar of Division- Ayodhya. (Depth upto 120 m) |
| 2 | Transportation of DC/DTH Rig Machine including cost of labour etc. complete. |
| 3 | Water Supply Charges for drilling work. |
| 4 | Drilling of 300 mm dia bore well by suitable method including collection of sample of different strata including cost of equipment ,T&P etc, complete required for work up to 150mt depth below ground level . |
| 5 | Supplying ,assembling, and Lowering of 150 mm dia uPVC Casing Pipe (confirming IS:12818) assembly including labour charges etc all complete. |
| 6 | Supplying ,assembling, and Lowering of 150 mm dia uPVC with Ribs (confirming IS:12818) assembly including labour charges etc all complete . |
| 7 | Providing and fixing 150 mm dia bottom plug to the bottom of pipe assembly . |
| 8 | Supply & installation of 200 mm dia casing MS pipe. |
| 9 | Providing & fixing of 200 mm MS clamp for holding of MS pipe including neccesary nut & bolt of required size. |
| 10 | Providing and fixing of MS square plate of size 200mmx200mm & thickness 6mm including 04 No. Fastener set. |
| 11 | Providing & filling of Pea Gravel of size 2 mm to 4 mm dia into bore well including cost of labour, material etc. required for proper completion of work. (gwd sor) 3.14/4 x 120 x 0.30 x 0.30 – (3.14/4 x 120 x 0.15 x 0.15) =8.48 – 2.12= 6.36 |
| 12 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. for All kinds of soil . |
| 14 | API grade Bentonite Powder (High yield, drilling mud grade for borehole stablization including cost of Labour, T&P etc.) {MT = Metric Tonne} |
| 15 | Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand (zone III) : 8 graded stone aggregate 40mm nominal size) all work up to the plinth level . |
| 16 | Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size ) etc complete. |
| 17 | Fabrication and fixing of Security System as per design including cost of material, labour etc. required for proper completion of work. |
| 18 | Fabrication & supply of angle iron sign board of frame size 1.20m x 0.90m x 1.95m with cross strip & beading of size 30mm x 4mm welded on frame of MS Angle 40x40x5mm and MS sheet of 18 gauge as per drawing & design including all labour, material and T&P etc. complete. |
| 19 | Fixing of legs of sign board on cement concrete block of size 0.30x0.30x0.60m in ratio 1:3:6 as per drawing and design including all labour and material etc. complete. |
| 20 | Painting of angle iron sign board with double coat primer and enamel paint of black colour on frame both side and sky blue on M.S. sheet both side including all labour and material etc. complete. |
| 21 | Writing on angle iron sign board both sides of given matter with Post office Red colour Fluorescent paint as per drawing and detail given including all labour, material etc. complete. |
| 22 | Loading/Unloading & transportation of material, T&P including all labour etc. complete. |
| 23 | Tentage charges. |
| 24 | Reduce Level Survey work for fixing of Latitude, Longitude including all labour, T&P etc. as required. |
| 25 | Geophysical Survey (Resistivity Survey & Borewell Logging) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender