Agriculture Government Departments Closing in 8 days TDR #56984939

Tender For Repair Of Godown Sheets , Repair Of Shutter, Jalidar Gate, Main Gate, Godown Floor, Platform Etc. At Swc Pihani.

Issued by Government Departments · Hardoi, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Aug 2026
8 days left
EMD
79800
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair Of Godown Sheets , Repair Of Shutter, Jalidar Gate, Main Gate, Godown Floor, Platform Etc. At Swc Pihani.

BOQ

Name of Work:- Repair of Godown Sheets , Repair of Shutter, Jalidar Gate, Main Gate, Godown Floor, Platform Etc. At SWC Pihani.
Sl. No. Item Description
1Godown Repair Work
2Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet.
3Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking.
4Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.|. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.
5Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Close fitting adjustable ridges
6Refixing of old wind tie as per direction of Engineer-In-Charge.
7Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m²
8Extra for scaffolding system , Repair work at required locations with essential safety features for the workmen etc.,complete as per directions and approval of Engineer-In-Charge.
9Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
10Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in superstructure above plint level in all shapes and sizes in: Cement mortar 1:4 (cement : 4 coarse sand) (Repairing of Brick Work Without Scaffolding)
11Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
12Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
13Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
14Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
15Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
16Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
1752 40 mm thick with 20 mm nominal size stone aggregate mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
18Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar
19Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
20Repair of rolling shutter i/e washing of Shutter by kerosin oil, oiling greasing and tightning of spring, T&P etc Complete & as per direction of Engineer-in-Charge.
21S/F Rolling shutters kunda patti, nails & as per direction of Engineer-in-Charge
22Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard gates and similar works bar, ladder, railings, brackets,
23Repair of main gate with welding and other work
24Refixing of old jalidar gate.
2512 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
26Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56984939
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 22-08-2026
Authority
Authority Name Uttar Pradesh State Warehousing Corporation Limited
Work Description Tender for Repair Of Godown Sheets , Repair Of Shutter, Jalidar Gate, Main Gate, Godown Floor, Platform Etc. At Swc Pihani.
Basic Detail
Tender No 20260830134
Bidding Type Tender
Location
City Hardoi
State Uttar Pradesh
Key Dates
Publish Date 12 Aug 2026
Submission Date 22 Aug 2026
Open Date 22 Aug 2026
Finance
Tender Value Ref. Documents
Tender Fee 1180
EMD 79800
Exemption Not Available
Document List
BOQ_2211086.xls
c3cbae1a-83c7-4f19-9f97-69344a906f8b.html
MTF.pdf
Tendernotice_1 (36).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 22, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Aug 22, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2211086.xls

html

c3cbae1a-83c7-4f19-9f97-69344a906f8b.html

pdf

MTF.pdf

pdf

Tendernotice_1 (36).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders