Tender For Setting Up Of Dialysis Centres On Turnkey Basis In Himachal Pradesh

Sharing tender

Tender for Setting Up Of Dialysis Centres On Turnkey Basis In Himachal Pradesh , List Of Products , Icu Bed (Manual 4 Section With Matress) , Hemo Dialysis Machine , Ro Plant System -500Lph , Ro Plant System-250 Lph , Dialysis Reprocessor , Multi Para Monitor , Syringe Pump , Bicarb Mixer , Electronic Weighing Scale- Adult , Thermometer- Infrared Type , Glucometer , Stethoscope , Bedside Locker , Overbed Table , Iv Stand With Ss Rod And Castor Base , Laryngoscope , Ambu Bag Adult , Wheel Chair - Foldable , Crash Cart , Dressing Trolley , Drug Trolley/Medicine Cart , Scrub Station(Ss With Tap) , Infrstucture Work (Civil, Electrical, Plumbing Etc.) As Per The Scope Of Work Mentioned In Tender (Detailed Price From Sheet - Infra) B Detailed Price Of Infrstucture Works Total Amount Without Gst 0.0 Sn Description Qty Unit Rate Withou Gst Total Amount , Setting Up Of Dialysis Unit At Ch Amb, Una Dist Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.7 Cum 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 84.5 Sqm 0.0 Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineerin-Charge. 3.2 Each 0.0 Masonry Work Providing And Laying Autoclaved Aerated Concrete(Aac) Blocks Masonry 100 Mm/ 125 Mm Thick With Grade-1 Aac Blocks Of Density 551 To 650Kg/Cum Conforming To Is:2185 (Part 3) In Super Structure Above Plinth Level Up To Floor V Level In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ). The Rate Includes Providing And Placing In Position 2 Nos 6 Mm Dia M.S.Bars At Every Third Course Of Masonry Work. 4.1 Cum 0.0 Providing And Laying Autoclaved Aerated Concrete(Aac) Blocks Masonry With 150 Mm To 300 Mm Thick With Grade-1 Aac Blocks Of Density 551 To 650 Kg/Cum Conforming To Is:2185 (Part 3) In Super Structure Above Plinth Level Up To Floor V Level With Reinforced Cement Concrete Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge. (The Payment Of Reinforced Cement Concrete Band And Reinforcement Shall Be Made For Seperately). 0.6 Cum 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). 0.2 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 16.0 Kg 0.0 Formwork Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: 5.9.5 Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 3.6 Sqm 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 100.8 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 14.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 14.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 7.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 8.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 2.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 7.0 Each 0.0 Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 1.7 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 5.0 Metre 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 9.5 Sqm 0.0 Tile Work 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 52.2 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 78.8 Sqm 0.0 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 9.0 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 3.1 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 76.5 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 377.7 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 333.4 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 93.1 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 46.8 Kg 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 1.1 Sqm 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 40.8 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 5.3 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 3.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 8.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 10.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Flexible Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 1.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 9.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 3.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 65.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 85.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 9.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 13.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 13.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 8.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 70.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 35.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 35.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 13.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 3.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Anni, Kullu District Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 35.0 Sqm 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 10.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 2.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 2.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 1.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 1.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 3.6 Sqm 0.0 Tile Work Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 31.7 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 35.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 12.39 Sqm 0.0 Painting Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 175.0 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 206.7 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 20.2 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 30.6 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 33.4 Sqm 0.0 Aluminium Works 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 19.0 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 6.8 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 5.8 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 1.0 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 4.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 10.0 M 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 6.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 6.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 10.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 4.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 60.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 80.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 3.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 7.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 15.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 15.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 4.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 4.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 60.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 15.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 4.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Bagsaid, Mandi District Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 5.0 Sqm 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 10.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 5.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 5.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 4.4 Sqm 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 5.5 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 12.39 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 0.7 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 38.6 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 38.6 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 5.0 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 97.9 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 26.6 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 36.3 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 3.8 Sqm 0.0 Plumbing Works Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 10.0 M 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 4.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 2.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 3.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 1.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 20.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 30.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire 15.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 10.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 3.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 2.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 2.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 16.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 8.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 4.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 10 W Led Light Fixture (2 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 50 Lm/W, Cri 80 Etc With All Required Accessories. 1.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Bharmour, Chamba District, Hp Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 7.2 Sqm 0.0 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 1.0 Each 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.2 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 16.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 2.5 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 0.3 Cum 0.0 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 1.8 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 41.6 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 8.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 8.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 4.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 3.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 2.0 Each 0.0 Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 1.7 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 5.0 M 0.0 Tile Work Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 15.0 Sqm 0.0 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 9.4 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 2.2 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 10.0 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 12.8 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 25.3 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 107.8 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 5.4 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 66.3 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 10.0 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 8.2 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 70.9 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 27.5 Kg 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 0.4 Sqm 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 20.6 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 3.4 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 3.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 5.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Flexible Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 1.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 1.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.55 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 60.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 14.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 3.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 7.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 7.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 24.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 50.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 9.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Barsar Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 3.0 Each 0.0 Dismantling Of Flushing Cistern Of All Types (C.I. / Pvc/ Vitrous China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 3.0 Each 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 11.6 Sqm 0.0 Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.4 Cum 0.0 Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area Below 40 Square Centimetres 17.5 M 0.0 Dismantling Of Wash Basin/ Sink, Closing The Pipeline With End Cap If Necessary, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 3.0 Each 0.0 Dismantling Of Plumbing Pipe Lines Of 15Mm Dia To 110Mm Dia Pipes, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead As Per The Direction Of Engineer In-Charge. 15.0 Metre 0.0 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I/C Malba All Complete As Per Directions Of Engineer-In Charge 3.0 Each 0.0 Dismantling Of Flushing Cistern Of All Types (C.I./Pvc/Vitrious China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 3.0 Each 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.1 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 4.8 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 0.6 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 5.7 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 66.3 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 5.0 Sqm 0.0 Doors & Windows Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 4.4 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 13.5 M 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 5.4 Sqm 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 6.0 Sqm 0.0 Tile Work Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 8.1 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 2.1 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 14.9 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 5.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 45.7 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 149.0 Sqm 0.0 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 46.3 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 244.7 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 18.4 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 23.7 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 37.6 Sqm 0.0 Steel Works Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 45.8 Kg 0.0 Providing At All Heights, Levels And Locations Aluminium Profile Industrial Troughed Sheet Of Alloy 31500/31000/40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling/ Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I/C Cutting To Size And Shape Where Required As Per Specifications, Detail Drawings And Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealent Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses 0.71 Mm Thick, The Profile Detail Width 1044/920 Mm, Cover Width 1000/875 Mm. 6.7 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 9.8 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 8.5 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is:12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 1.7 Sqm 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 0.7 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 1.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 75Mm 4.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 8.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 4.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 8.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 3.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 75.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire 20.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 1.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 1.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 3 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 6 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 15.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 15.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 9.0 Each 0.0 Supplying And Fixing 3 Pin, 5 A Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connections Etc. As Required. 1.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 25.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 25.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Earthing Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 40.0 Metre 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 8.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 10 W Led Light Fixture (2 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 50 Lm/W, Cri 80 Etc With All Required Accessories. 3.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Wall Fan, White Colour, 5 Star Rated As Per Bee Complete With Blades, Casing, Wall Mounting Accessories Etc. 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Bhoranj, Hamirpur District, Hp Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Taking Out Existing cement concrete Interlocking Paverblocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc, Disposal Of Unservicecable Material To The Dumping Ground For Which Payement Shall Be Made Separately, And Stacking Of Serviceable Materials Within 50M Lead As Per Direction Of Engineer In Charge 107.9 Sqm 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.6 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 48.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 8.3 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 6.1 Cum 0.0 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 4.0 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 143.5 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 18.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 18.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 9.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 7.0 Each 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 89.1 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 35.9 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 143.5 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 332.6 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 97.1 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 36.1 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 145.1 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 47.5 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 50.7 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 7.0 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 5.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Flexible Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 1.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 7.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 7.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 9.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 60.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 110.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 6.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 12.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 3 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 6 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 15.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 15.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 10.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 10.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 80.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 25.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 25.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 11.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Wall Fan, White Colour, 5 Star Rated As Per Bee Complete With Blades, Casing, Wall Mounting Accessories Etc. 1.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 10 W Led Light Fixture (2 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 50 Lm/W, Cri 80 Etc With All Required Accessories. 1.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Chopal Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 2.0 Each 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 49.8 Sqm 0.0 Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 1.1 Cum 0.0 Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area Below 40 Square Centimetres 9.1 M 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 20.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 15.0 Sqm 0.0 Doors & Windows 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 14.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 14.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 7.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 7.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 12.5 Sqm 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 49.8 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 11.1 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 160.2 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 171.3 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 17.4 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 37.0 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 118.6 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 40.8 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 43.7 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 6.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 1.5 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 5.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 4.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 4.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 1.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 45.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 65.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 5.0 Each 0.0 Modular Type Switch/Socket 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 7.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 6.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 9.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 3.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Chowari Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 37.2 Sqm 0.0 Earth Work Excavation Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. 2.9 Cum 0.0 Plain Cement Concrete Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) 3.5 Cum 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.6 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 60.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 5.6 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 12.9 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 135.2 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 5.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 8.0 Sqm 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 4.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 4.0 Each 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 16.5 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 4.5 Sqm 0.0 Steel Works Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 156.6 Kg 0.0 Providing At All Heights, Levels And Locations Aluminium Profile Industrial Troughed Sheet Of Alloy 31500/31000/40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling/ Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I/C Cutting To Size And Shape Where Required As Per Specifications, Detail Drawings And Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealent Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses 0.71 Mm Thick, The Profile Detail Width 1044/920 Mm, Cover Width 1000/875 Mm. 38.7 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 19.7 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 149.8 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 41.4 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 19.8 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 96.7 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 25.4 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 17.6 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 4.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 75Mm 8.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 15.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 3.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 4.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 5.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 25.0 Metre 0.0 Supply/Fixing Pvc Conduit Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.(Isi Make25 Mm 10.0 Metre 0.0 Supply And Fiing Of 25 Mm Sized Medium Casing Caping White/Ivory Colour With Its All Accessories 10.0 Meter 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 4.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 3 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 6 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 4.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 4.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A Sp Switch With Indicator 1.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A 3Pin Shuttered Socket 1.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 40.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 6.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Dadasheeba, Kangra Dist Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : 15.12.1 Of Area 3 Sq. Metres And Below 1.0 Each 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 45.9 Sqm 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.1 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 8.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 0.9 Sqm 0.0 Masonry Work Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 1.2 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 37.9 Sqm 0.0 Doors & Windows Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 2.1 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 5.2 M 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 12.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 12.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 6.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 6.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 2.0 Each 0.0 Tile Work Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 17.4 Sqm 0.0 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 13.4 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 4.1 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 45.0 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 12.4 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 95.3 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 97.7 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 8.4 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 13.2 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 31.8 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 108.4 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 63.2 Kg 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 1.0 Sqm 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 39.7 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 3.0 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 3.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 5.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 10.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 10.0 M 0.0 Flexible Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 1.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 1.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 45.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 55.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 5.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 7.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 7.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 8.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 3.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Dehra, Kangra District, Hp Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.6 Cum 0.0 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 41.0 Sqm 0.0 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 1.0 Each 0.0 Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area Below 40 Square Centimetres 8.2 M 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.1 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 8.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 1.4 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 0.5 Cum 0.0 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 1.2 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 30.8 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 14.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 14.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 7.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 2.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 2.0 Each 0.0 Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 1.7 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 5.0 M 0.0 Tile Work Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joint Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade. Area Of Slab Over 0.50 Sqm 0.8 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 15.0 Sqm 0.0 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 8.7 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 2.0 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 37.8 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 33.6 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 30.8 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 107.9 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 1.2 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 90.2 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 37.8 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 15.1 Sqm 0.0 Steel Works Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 20.0 Kg 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 80.2 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 43.3 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 35.3 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 5.6 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 3.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 7.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Flexible Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 1.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 7.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 4.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 50.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 90.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire 20.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 5.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 10.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 13.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 13.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 10.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 10.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 1.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required 25A, 4P, 100Ma 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 30.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 2.0 Each 0.0 Earthing Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 70.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 40.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 40.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 9.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 10 W Led Light Fixture (2 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 50 Lm/W, Cri 80 Etc With All Required Accessories. 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Phc Dhagera,Sirmour District Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 81.4 Sqm 0.0 Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.3 Cum 0.0 Dismantling Of Wash Basin/ Sink, Closing The Pipeline With End Cap If Necessary, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 2.0 Each 0.0 Dismantling Of Plumbing Pipe Lines Of 15Mm Dia To 110Mm Dia Pipes, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead As Per The Direction Of Engineer In-Charge. 15.0 Metre 0.0 Demolishing Reinforced Cement Concrete Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. 0.2 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 50.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 15.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 4.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 4.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 2.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 2.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 2.8 Sqm 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 30.0 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 55.5 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 64.7 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 64.7 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 7.5 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 24.0 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 37.9 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 12.4 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 11.0 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 2.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc.With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 1.6 Sqm 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 1.1 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 75Mm 3.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 3.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 4.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 2.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 55.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 5.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 6.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 30.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 7.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 3.0 Each 0.0 , Setting Up Of Dialysis Unit At Chc Dhaneta, Hamirpur Civil , Plumbing Works Total Amount Without Gst 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 10.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 8.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 8.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 4.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 4.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 2.0 Sqm 0.0 Tile Work Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 23.2 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 46.1 Sqm 0.0 Painting Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 159.2 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 156.2 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 28.9 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 36.1 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 15.0 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 115.4 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 27.2 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 51.4 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 1.0 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 1.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 10.0 M 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 6.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 3.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 8.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 39.84 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 49.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Supply/Fixing Pvc Conduit Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.(Isi Make25 Mm 10.0 Metre 0.0 Supply And Fiing Of 25 Mm Sized Medium Casing Caping White/Ivory Colour With Its All Accessories 10.0 Meter 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 7.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 4.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 3 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 6 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 12.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 12.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 6.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A Sp Switch With Indicator 1.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A 3Pin Shuttered Socket 1.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 30.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 8.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Dharampur Civil , Plumbing Works Total Amount Without Gst 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.9 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 90.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 9.1 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 16.1 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 185.3 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 77.7 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:200X10 Mm 16.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 16.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 9.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 9.0 Each 0.0 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete.Fixed To Openings/ Wooden Frames With Rawl Plugs Screws Etc 34.2 Kg 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 69.2 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 18.9 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 18.5 Sqm 0.0 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 12.5 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 263.0 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 13.6 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 25.0 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 132.5 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 67.9 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 53.2 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 10.0 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 6.0 Each 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 2.4 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 75Mm 4.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 10.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 5.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 15.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 4.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 6.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 4.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 30.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 65.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire 10.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Supply/Fixing Pvc Conduit Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.(Isi Make25 Mm 10.0 Metre 0.0 Supply And Fiing Of 25 Mm Sized Medium Casing Caping White/Ivory Colour With Its All Accessories 10.0 Meter 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 6.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 3 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 6 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 9.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A Sp Switch With Indicator 1.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A 3Pin Shuttered Socket 1.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 40.0 Metre 0.0 Supply Of Lt Cables 0.0 Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying 0.0 Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 7.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Ghumarwin Bilaspur Civil , Plumbing Works Total Amount Without Gst 0.0 Description Qty Unit Dismantling & Demolition Works Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 1.0 Each 0.0 Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 1.2 Cum 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 27.2 Sqm 0.0 Earth Work Excavation Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. 2.9 Cum 0.0 Plain Cement Concrete Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) 3.5 Cum 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.6 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 60.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 5.6 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 12.9 Cum 0.0 Plastering 0.0 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 195.7 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 22.4 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 4.0 Sqm 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 2.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 2.0 Each 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 27.2 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 43.8 Sqm 0.0 Steel Works Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 156.6 Kg 0.0 Providing At All Heights, Levels And Locations Aluminium Profile Industrial Troughed Sheet Of Alloy 31500/31000/40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling/ Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I/C Cutting To Size And Shape Where Required As Per Specifications, Detail Drawings And Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealent Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses 0.71 Mm Thick, The Profile Detail Width 1044/920 Mm, Cover Width 1000/875 Mm. 38.7 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 110.0 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 237.6 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 38.7 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 19.9 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 9.6 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 33.1 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 18.2 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 6.3 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 2.0 Each 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 1.5 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 75Mm 4.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 15.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 3.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 4.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 5.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 45.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 50.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 8.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 3 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 6 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 9.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A Sp Switch With Indicator 1.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A 3Pin Shuttered Socket 1.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 5.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 25.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 25.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 6.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Indora, Kangra Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 2.0 Each 0.0 Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:4:8 Or Leaner Mix (I/C Equivalent Design Mix) 2.8 Cum 0.0 Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area Below 40 Square Centimetres 10.2 M 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 30.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 20.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 12.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 12.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 6.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 6.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 11.5 Sqm 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 27.8 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 30.3 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 94.0 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 94.0 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 27.6 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 19.6 Sqm 0.0 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) 25.8 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 74.9 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 37.7 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 31.1 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 5.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 4.8 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 3.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 3.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 4.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 60.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 10.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 3.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 7.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 4.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 4.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 8.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Jaisinghpur, Kangra Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 2.0 Sqm 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 5.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:200X10 Mm 4.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 14.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 7.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 2.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 5.1 Sqm 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 10.0 Each 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 5.0 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 5.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 60.0 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 134.9 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 97.0 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 23.8 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 7.2 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 38.5 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 188.3 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 38.9 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 72.8 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 6.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 5.4 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 6.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 6.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 7.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 60.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 75.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 7.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 11.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 7.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 24.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 50.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 12.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 3.0 Each 0.0 Supply Installation Testing and Commissioning of Wall Fan, White Colour, 5 Star Rated As Per Bee Complete With Blades, Casing, Wall Mounting Accessories Etc. 1.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Of Dialysis Unit At Ch Junga, Shimla Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.5 Cum 0.0 Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineerin-Charge. 3.6 Sqm 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 11.6 Sqm 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 10.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 20.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:200X10 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 4.0 Each 0.0 Providing And Fixing Aluminium Double U Channels Of Required Size For Sliding Doors 1.2 Sqm 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 36.4 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 27.8 Sqm 0.0 Aluminium Works Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 9.0 Sqm 0.0 Aluminium Work Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 169.8 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 32.1 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 66.4 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 5.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 4.8 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 91.6 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 82.6 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 8.2 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 18.8 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 3.6 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 3.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 15.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 50.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 75.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 4.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 5.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 6.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 10.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 3.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Kihar, Chamba District, Hp Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.1 Cum 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 4.1 Sqm 0.0 Masonry Work Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 3.9 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 83.5 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 22.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 22.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 10.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 10.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 2.0 Each 0.0 Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 1.7 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 5.0 M 0.0 Tile Work Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joint Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade. Area Of Slab Over 0.50 Sqm 1.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 143.7 Sqm 0.0 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 11.0 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 2.9 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 83.5 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 133.4 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 1.4 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 49.9 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 15.1 Sqm 0.0 Steel Works Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 20.1 Kg 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 128.4 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 66.4 Kg 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 0.4 Sqm 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 52.6 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 8.1 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 3.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 4.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Flexible Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 1.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 6.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 8.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 35.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 55.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 1.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 3.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 4.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 5.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 5.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 2.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 25.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 25.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Earthing Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 40.0 Metre 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 11.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 10 W Led Light Fixture (2 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 50 Lm/W, Cri 80 Etc With All Required Accessories. 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Kothai, Shimla Dist Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 1.3 Cum 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 1.6 Sqm 0.0 Dismantling Wooden Boardings In Lining Of Walls And Partitions, Excluding Supporting Members But Including Stacking Within 50 Metres Lead Thickness Above 10 Mm Up To 25 Mm 5.8 Sqm 0.0 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 1.0 Each 0.0 Dismantling Of Wash Basin/ Sink, Closing The Pipeline With End Cap If Necessary, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 1.0 Each 0.0 Dismantling Of Plumbing Pipe Lines Of 15Mm Dia To 110Mm Dia Pipes, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead As Per The Direction Of Engineer In-Charge. 15.0 Metre 0.0 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I/C Malba All Complete As Per Directions Of Engineer-In Charge 1.0 Each 0.0 Dismantling Of Flushing Cistern Of All Types (C.I./Pvc/Vitrious China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 1.0 Each 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 0.2 Cum 0.0 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 4.8 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 33.1 Sqm 0.0 Doors & Windows Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 1.5 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 4.9 M 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 4.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 4.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 2.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 2.3 Sqm 0.0 Tile Work Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 10.4 Sqm 0.0 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 10.3 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 1.6 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 10.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 12.39 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 12.4 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 107.7 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 108.6 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 6.6 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 13.7 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 23.9 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 94.6 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 62.5 Kg 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 5.5 Sqm 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 38.0 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 4.6 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 12.0 Each 0.0 Providing And Fixing Aluminium Double U Channels Of Required Size For Sliding Doors 1.0 M 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 2.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 5.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 10.0 M 0.0 Flexible Pipe32 Mm Dia 2.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 2.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 2.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 2.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 4.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 4.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 35.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 45.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire 15.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 10.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 3.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 5.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 5.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 5.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 24.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 8.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Nadaun Civil , Plumbing Works Total Amount Without Gst 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 10.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 5.0 Sqm 0.0 Doors & Windows Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 9.2 Sqm 0.0 Tile Work Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 65.7 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 54.2 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 54.2 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 11.0 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 63.2 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 18.6 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 22.6 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 3.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 2.4 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 4.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages 0.0 Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 4.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 2.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 5.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 45.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 50.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x4 Sq.Mm + 1X4 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 9.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 7.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 24.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 55.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 1.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 5.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Padhar, Mandi District, Hp Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 77.2 Sqm 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.5 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 40.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 6.8 Sqm 0.0 Masonry Work Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:4 (1 Cement : 6 Coarse Sand) 5.7 Cum 0.0 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 9.2 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 92.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 20.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 16.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 16.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 8.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 8.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 4.0 Each 0.0 Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 3.4 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 10.0 M 0.0 Providing And Fixing Of Glass Door Ss Patch Lock With Out Handle In Toughened Glass Door Including All Necessary Screws Etc. Complete. 1.0 Each 0.0 Providing And Fixing Steel S.S- 304 (D) Door Pull Both Side Handle Of 12 Inch, One Set (2 Handles) ( Best Make Of Approved Quality ) For Glass, Wooden Or Similar Doors Including Necessary Cutting And Making Good Etc. Complete 2.0 Set 0.0 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Action Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-Incharge (Door Handle, Lock And Stopper Etc.To Be Paid Separately). 3.2 Sqm 0.0 Tile Work Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 22.2 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 4.7 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 72.0 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 27.2 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 76.5 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 228.1 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 162.2 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 34.8 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 178.6 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 72.2 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 23.1 Sqm 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 5.0 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 6.8 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 12.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 2.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 10.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 10.0 M 0.0 Flexible Pipe32 Mm Dia 2.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 2.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 2.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 2.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 2.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 2.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 6.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 3.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 10.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 4.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 60.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 75.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 6.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 6.0 Each 0.0 Modular Type Switch/Socket 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 12.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 12.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 6.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 13.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 2.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 3.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Sujanpur Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 34.2 Sqm 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 20.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 10.0 Sqm 0.0 Doors & Windows Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 8.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 8.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 4.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 4.0 Each 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 9.0 Sqm 0.0 Tile Work Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 34.2 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 37.5 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 62.8 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 62.8 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 21.4 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 34.2 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 102.3 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 23.4 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 36.3 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 3.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 3.3 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 3.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 4.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 5.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 55.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 12.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 1.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 5.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 5.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 3.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 3.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 70.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 35.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 70.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 8.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 1.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Tauni Devi, Hamirpur Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Of Flushing Cistern Of All Types (C.I. / Pvc/ Vitrous China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 2.0 Each 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 64.4 Sqm 0.0 Dismantling Of Wash Basin/ Sink, Closing The Pipeline With End Cap If Necessary, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 2.0 Each 0.0 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I/C Malba All Complete As Per Directions Of Engineer-In Charge 2.0 Each 0.0 Dismantling Of Flushing Cistern Of All Types (C.I./Pvc/Vitrious China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 2.0 Each 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 20.0 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 5.0 Sqm 0.0 Doors & Windows Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 6.0 Sqm 0.0 Tile Work Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 10.0 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 3.6 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 60.8 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 0.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 47.7 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 80.5 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 103.3 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 35.7 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 6.0 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 121.0 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 32.8 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 49.0 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 6.0 Each 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 4.8 Sqm 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 2.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 2.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 2.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 11.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 2.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 2.0 Each 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 2.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 2.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 2.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 7.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 60.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 20.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 10.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 5.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 14.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 14.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 8.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 8.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 60.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 10.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Theog, Shimla Dist Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling And Demolishing Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.9 Cum 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 3.7 Sqm 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.1 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 5.8 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 1.0 Sqm 0.0 Masonry Work Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 0.7 Cum 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 13.6 Sqm 0.0 Doors & Windows Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 2.1 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 5.2 M 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 20.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 20.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 6.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 10.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 2.0 Each 0.0 Tile Work Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 13.4 Sqm 0.0 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 12.2 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 3.6 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 5.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 92.0 Sqm 0.0 Painting Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 7.2 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 266.9 Sqm 0.0 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 271.1 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 7.1 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 6.3 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 27.6 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 299.7 Kg 0.0 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 79.8 Kg 0.0 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 6.0 Sqm 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 102.5 Sqm 0.0 Providing And Fixing Glazing In Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber /Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): Toughened Glass Of 6 Mm Thickness. 17.3 Sqm 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 100Mm 9.0 Each 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 8.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 6.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 15.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 20.0 M 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 15.0 M 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 10.0 M 0.0 Flexible Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 31 Mm Dia Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45 Gms 1.0 Each 0.0 Roviding And Fixing Ptmt Bottle Trap For Wash Basin And Sink.Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Center Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms 1.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 6.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 10.0 Point 0.0 Wiring For Group Controlled (Looped) Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 2.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 65.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 90.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 5.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 12.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 14.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 14.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 7.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 7.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)16 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 A 1.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Supplying And Fixing Fp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Fp Isolator Complete With Connections, Testing And Commissioning Etc. As Required. 1.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 70.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 15.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 80.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 12.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 4.0 Each 0.0 , Setting Up Of Dialysis Unit At Ch Tissa, Chamba Civil , Plumbing Works Total Amount Without Gst 0.0 Dismantling & Demolition Works Dismantling Of Flushing Cistern Of All Types (C.I. / Pvc/ Vitrous China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 1.0 Each 0.0 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm 24.2 Sqm 0.0 Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 0.4 Cum 0.0 Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area Below 40 Square Centimetres 17.5 M 0.0 Dismantling Of Plumbing Pipe Lines Of 15Mm Dia To 110Mm Dia Pipes, Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead As Per The Direction Of Engineer In-Charge. 15.0 Metre 0.0 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I/C Malba All Complete As Per Directions Of Engineer-In Charge 1.0 Each 0.0 Dismantling Of Flushing Cistern Of All Types (C.I./Pvc/Vitrious China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead 1.0 Each 0.0 Reinforced Cement Concrete Work Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). 0.2 Cum 0.0 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 9.0 Kg 0.0 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 1.3 Sqm 0.0 Masonry Work Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level: Cement Mortar 1:4 (1 Cement :4 Coarse Sand) 9.2 Sqm 0.0 Plastering 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix : 1:4 (1 Cement: 4 Fine Sand) 20.1 Sqm 0.0 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) 5.0 Sqm 0.0 Doors & Windows Providing And Fixing To Existing Door Frames24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (± 0.2 Mm) Wall Thickness,Fixed To The Shutter Styles By Means Of Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge( For W.C. And Bathroom Door Shutter). 3.4 Sqm 0.0 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1 Mm), With Wall Thickness 2.0Mm (±0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1 Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 48X40 M 10.0 M 0.0 Providing And Fixing Of Vertical/Roller Blinds Width 100 Mm Regular Quantity Made From 100 % Polyster/Fibre Yarn Coated With Fade Resistant Polymer To Ensure Complete Opaquety With Zero Light Transmittance, Having Suitable Coating On Exterior, Including All Fixtures And Fittings Complete In All Respect As Per Design And Instruction Of Engineer In-Charge And As Per Site Conditions. The Colour Will Be Approved By The Competent Authority Make-Mac/Vista/Nova Or Any Equivalent Make. 1.4 Sqm 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:100X10 Mm 4.0 Each 0.0 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:150X10 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 10.0 Each 0.0 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 5.0 Each 0.0 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. 5.0 Each 0.0 Tile Work Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 6.3 Sqm 0.0 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 1.6 Sqm 0.0 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 16.7 Sqm 0.0 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 5.0 Sqm 0.0 Cleaning Wall And Floor Tiles Using Acid As Per Direction Of Engineer- In - Charge 23.0 Sqm 0.0 Painting Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 127.5 Sqm 0.0 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 20.1 Sqm 0.0 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 165.5 Sqm 0.0 Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture 10.4 Sqm 0.0 Melamine Polishing On Wood Work (One Or More Coat) 5.2 Sqm 0.0 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 11.7 Sqm 0.0 Aluminium Works Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Fixed Portion Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 66.7 Kg 0.0 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separatelypowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 26.6 Kg 0.0 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge.Pre-Laminated Particle Board With Decorative Lamination On Both Side 36.8 Sqm 0.0 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 4.0 Each 0.0 Plumbing & Sanitary Fittings Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lidproviding And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 1.0 Each 0.0 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 1.0 Each 0.0 Supplying And Fixing Cp Health Faucet Superior Quality (Jagur Or Equvalent Make) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge 1.0 Each 0.0 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10Kgf/Cm2 - External Work - Exposed On Wall 5.0 M 0.0 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 :15Mm Nominal Bore 4.0 Each 0.0 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc. Waste Fittings Complete. Semi Rigid Pipe32 Mm Dia 1.0 Each 0.0 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete:20 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690Gms. 15 Mm Nominal Bore 1.0 Each 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes 10.0 M 0.0 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Wall 32 Mm Nominal Dia Pipes 10.0 M 0.0 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Circular Type 100 Mm Nominal Dia 1.0 Each 0.0 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 5.0 M 0.0 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions:45 Cm Length15 Mm Nominal Bore 2.0 Each 0.0 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 1.0 Each 0.0 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour. 600Mm Long Towel Rail With Total Length Of 645Mm, Width 78Mm And Effective Height Of 88Mm, Weighing Not Less Than 190Gms. 1.0 Each 0.0 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour. Weighing Not Less Than 105 Gms. 1.0 Each 0.0 Signages Design, Providing And Fixing Digital Printed Vinyl Signage Boards With Transparent 3Mm Acrylic Sheet With 4 Nos. Ss Studs Of Size 16 X 10. Complete As Per The Per The Direction Of Engineer In Charge. 5.0 Each 0.0 Name Board Acp Sheet With Multiwood Lettering :Design, Supplying And Fixing Name Board As Per The Technical Specifications Given -1 Inch Gi Pipe Frame (16Guage) For Frame (Size Proportional), Primer Paint & Black Painted Pipes For Frame.,5Mm Acp Sheets (Aluminum Composite Panel) For Box Area, 18Mm Thick Multi Wood Lettering For Name Board As Approved ByBr Engineer In Charge.BrFor Measurement Purpose, Only Area Of Acp Sheet To Be Measured. 1.3 Sqm 0.0 Electrical Works Total Amount Without Gst 0.0 Point Wiring Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group B 5.0 Point 0.0 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C 6.0 Point 0.0 Wiring Through Pvc Conduit Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required.2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 40.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x2.5 Sq.Mm + 1 X2.5 Sq Mm Earth Wire 45.0 Metre 0.0 Wiring For Circuit/Submain Wiring Along With Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/Recessed Medium Class Pvc Conduit As Required2x6 Sq.Mm + 1X6 Sq.Mm Earth Wire 15.0 Metre 0.0 Modular Type Blanking Plate Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 2.0 Each 0.0 Modular Boxes And Plate Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.2 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module 2.0 Each 0.0 Supplying And Fixing Following Size/Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.6 Module 4.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant )2 Module Moulded Plastic Box On Surface 2.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 3 Module Moulded Plastic Box On Surface 3.0 Each 0.0 Supply & Fixing The Following Types/ Sizes Of Boxes Suitable For Modular Accessories In Surface/ Recess Including Making Good The Damages, Colour Washing Etc As Required (Rohs Compliant ) 6 Module Moulded Plastic Box On Surface 1.0 Each 0.0 Modular Type Switch/Socket Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 5/6 Amps Switch 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 3 Pin 5/6 annual periodical maintenance Socket Outlet 9.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 15/16 Amps Switch 6.0 Each 0.0 Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc As Required. 6Pin 15/16 Amps (Universal) Socket Outlet 6.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A Sp Switch With Indicator 1.0 Each 0.0 Supply And Fixing The Following Modular Switches & Accessories In The Existing Front Plates And Giving Necessary Connections As Required (Rohs Compliant )25A 3Pin Shuttered Socket 1.0 Each 0.0 Db And Its Accessories Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)12 Way , Double Door 2.0 Each 0.0 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral), 240 V, Residual Current Breaker With Overload (Rcbo), Having A Sensitivity Current 100 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required Up To 25A, 2P, 100Ma 2.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Triple Pole 1.0 Each 0.0 Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 20.0 Each 0.0 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 4.0 Each 0.0 Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25 Amps 415 Volts C Curve Dp Isolator Complete With Connections, Testing And Commissioning Etc. As Required.(For Ups In And Out) 2.0 Each 0.0 Earthing Providing And Fixing Earth Bus Of 50 Mm X 5 Mm Copper Strip On Surface For Connections Etc. As Required. 0.5 Metre 0.0 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring/ Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg) 40.0 Metre 0.0 Supply Of Lt Cables Supply Of The Following Size 1.1Kv Grade Xlpe Insulated Pvc Sheathed, Armoured Aluminium Conductor Power Cable Confirming To Is 7098 (Part 1) Ammended Upto Date 2X10sqmm 30.0 Meter 0.0 Cable Laying Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size On Cable Tray As Required.Upto 35 Sq. Mm (Clamped With 1Mm Thick Saddle) 30.0 Metre 0.0 Lt Cable Termination Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 2X 10Sq. Mm (28Mm) 4.0 Each 0.0 Light Fittings & Fans Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 20-24 W Led Light Fixture (4 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 100 Lm/W, Cri 80 Etc With All Required Accessories. 7.0 Each 0.0 Supply Installation Testing and Commissioning of Surface Mounted, Extruded Aluminium With Powder Coated Housing, Frosted Pmma / Pc Diffuser, 10 W Led Light Fixture (2 Feet), P.F 0.9, Thd 15%, 2.5Kv Surge Protection, Cct 6500K, Efficacy 50 Lm/W, Cri 80 Etc With All Required Accessories. 1.0 Each 0.0 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 2.0 Each 0.0 Supply Installation Testing and Commissioning of Exhaust Fan,Shutter Type White Colour, 9 Or 10-5Star Rated As Per Bee Complete With Its All Accessories Including Mounting Accessories 1.0 Each 0.0