Tender For Miscellaneous Civil Maintenance And Repair Works Of Bsnl Buildings & Staff Quarters At Kota City Area. (For The Period Of 06 Months).
Tender Value
2.85 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
2 days left
EMD
5703
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Miscellaneous Civil Maintenance And Repair Works Of Bsnl Buildings & Staff Quarters At Kota City Area. (For The Period Of 06 Months).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 2 | 100X58X1.90 mm |
| 3 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 4 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 5 | 30 mm thick plain PVC door shutters |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 7 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead all complete as per directions of EIC. |
| 9 | With cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 10 | Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty: |
| 11 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 12 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 13 | Orissa pattern W.C Pan of size 580x440 mm |
| 14 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 15 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 16 | W.C. pan with ISI marked white solid plastic seat and lid |
| 17 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 18 | Bars upto 12 mm diameter |
| 19 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 20 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. |
| 21 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 22 | 25 mm average thickness in 2 layers. |
| 23 | Providing and replacement of unservicable floor trap for making leakproof including cutting and making good floors/walls etc. by replacing PVC/ china vitreous trap with cement mortar 1:3 with neat cement after taking out grating from floor including demolishing of C.C. work and stacking of useful materials near the site and disposal of unserviceable materials to municipal dumps. |
| 24 | Providing Sewerman as and when required for attending complaints of drainage and sewerage works such as removal of choking of sewerline,gully traps and manholes of the quarters / buildings i/c cost of bamboo, phawra etc. (inclusive of cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid.) |
| 25 | Providing Plumber as and when required for attending complaints of plumbing, sanitary installations, water supply fittings and related works complete excluding the cost of material except washers,nails,clamps,screws, M- seal, taplon tap , drill machine , bit etc. as per direction of Engineer-in-Charge. The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of 'supply of material' of the agreement. |
| 26 | Providing carpenter as and when required for attending all complaints of carpentry works such as repair of doors , windows , cupboard shutters as per requriment on need basis for all jobs in one working day i/c cost of screws ,nails, fevicol clamps etc. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid under sub head 'supply of material' of the agreement except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid. |
| 27 | Providing Beldar/helper as and when required for attending maintenance job for carpentry,plumbing job and for other miscellaneous works such as cleaning the colonies compound, roof etc. including the cost of ledder, tagari, phawra etc.for all jobs in one working day. |
| 28 | P/ F red sand stone manhole cover/OH tank slab of approx. size 0.60 x0.90 m and 30 to 45 mm thick i/c cost of cutting in size, transportation and wastage etc. |
| 29 | Repalcing existing damaged wire gauge in doors & windows shutter by Providing and fixing fly proof galvanized SS 304 wire gauge using wire gauge with average width of aperture 16x18mm with wire of dia 0.22 mm of approved quality with nails, & second class teak wooden beading wherever required etc. all complete as per the direction of the Engineer-in-charge.( The clear inside area of panel shall be measured for payment. The rate includes of all above operations nothing extra shall be paid. ) |
| 30 | Sliding door bolts bright finished or / Black enamelled including necessary screws & nuts and bolts: |
| 31 | 250 x 16 mm |
| 32 | Tower bolts (barrel type) including necessary screws |
| 33 | 150 x 10 mm |
| 34 | M.S handle for doors, windows etc. including bolts, nuts, screws and washers. |
| 35 | 125 mm. |
| 36 | Hydraulic door closer sleek type M.S. body with necessaryaccessories and screws complete |
| 37 | Aluminium hanging floor door stopper with twin rubber & stopper including necessary screws. |
| 38 | Supply of G.I. UNIONS. |
| 39 | 15 mm nominal bore. |
| 40 | 20 mm nominal bore. |
| 41 | 25 mm nominal bore. |
| 42 | 32 mm nominal bore. |
| 43 | 50 mm nominal bore. |
| 44 | Supply of Flat back wash basin (Vitreous China) |
| 45 | 550 x 400 mm. |
| 46 | Supply of P.V.C. waste pipe for sink and wash basin. |
| 47 | 32 mm dia length not less than 700 mm. |
| 48 | Supply of FLUSHING CISTERN |
| 49 | PVC 10 litres capacity (low level) (white ) (with fittings, accessories and flush pipe of required size ) of Hindware , Cera or equivalent. |
| 50 | Supply of Unplasticised PVC connection pipe with brass union. |
| 51 | 30 to 45 Cm. long, 15 mm bore. |
| 52 | Supply of C.P.brass pillar tap 15mm dia. |
| 53 | Supply of Polyethylene water storage tank with cover and suitable locking arrangement. |
| 54 | Supply of Brass Bib cock. |
| 55 | 15 mm dia. |
| 56 | Supply of Brass stop cock. |
| 57 | 15 mm dia |
| 58 | Supply of PTMT Bib Cock /Stop Cock 15mm |
| 59 | Supply of PTMT Pillar Cock 15 mm |
| 60 | Supply of PTMT Ball Cock 15mm |
| 61 | Supply of PTMT Shower 15mm |
| 62 | Supply of STAINLESS STEEL /PTMT GRATING . |
| 63 | 125 mm dia. Gratting with or without waste hole , including fixing in cement |
| 64 | Supply of PTMT waste coupling 32 mm |
| 65 | Supplying White plastic seat (solid) with lid C.P. brass hinges and rubber buffers for E/WC. |
| 66 | Supplying of C.I. or M.S. Bracket / fastener for wash basin and sinks |
| 67 | PVC coupler/socket for PVC drainage pipes 75 mm |
| 68 | PVC coupler/socket for PVC drainage pipes 110 mm |
| 69 | PVC single equal Tee (without door) 75x75x75 mm |
| 70 | PVC single equal Tee (without door) 110x110x110 mm |
| 71 | PVC bend 87.5° 75 mm bend |
| 72 | PVC bend 87.5° 110 mm bend |
| 73 | PVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe |
| 74 | 75 mm dia |
| 75 | PVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe |
| 76 | size 110 mm dia |
| 77 | G.I. ELBOWS./Equal/ Reducers. |
| 78 | 15 mm dia. |
| 79 | 20mm dia |
| 80 | 25 mm dia. |
| 81 | G.I.NIPPLES UP TO 230MM |
| 82 | 15 mm dia. |
| 83 | 20mm dia |
| 84 | 25 mm dia. |
| 85 | G.I. PLUGS. |
| 86 | 15 mm dia. |
| 87 | 20 mm dia. |
| 88 | 25mm dia |
| 89 | G.I. TEES (EQUAL/Reducing). |
| 90 | 15 mm dia. |
| 91 | 20 mm dia. |
| 92 | 25mm dia |
| 93 | G.I. PIPE SOCKETS EQUAL/UNEQUAL( Higher dia to be measured) |
| 94 | 15 mm dia. |
| 95 | 20 mm dia. |
| 96 | 25mm dia |
| 97 | C. P brass spreader for urinals |
| 98 | Brass full way valve with handle (Italian type handle valves of approved make) |
| 99 | 15 mm dia. |
| 100 | 20 mm dia. |
| 101 | 25 mm dia. |
| 102 | 40 mm dia. |
| 103 | 50 mm dia. |
| 104 | Supplying unplasticised Rigid uPVC pipes (schedule 40) of approved brand & manufacture. |
| 105 | 20 mm diameter |
| 106 | 25mm diameter |
| 107 | Supply of Upvc fittings 20 mm |
| 108 | Elbow 90 Degree |
| 109 | Coupler/Socket |
| 110 | Female Adapter (PVC Thread) |
| 111 | Male Adapter (PVC Thread) |
| 112 | Female Adapter (Brass Thread) |
| 113 | Male Adapter (Brass Thread) |
| 114 | uPVC Tee (Brass Thread) |
| 115 | Supply of Upvc fittings 25 mm |
| 116 | Elbow 90 Degree |
| 117 | Coupler/Socket |
| 118 | Female Adapter (PVC Thread) |
| 119 | Male Adapter (PVC Thread) |
| 120 | Female Adapter (Brass Thread) |
| 121 | Male Adapter (Brass Thread) |
| 122 | uPVC Tee (Brass Thread) |
| 123 | Unplasticised PVC connection pipe with brass union. |
| 124 | 45 to 60 cm long for hot water & other appliances. |
| 125 | Supply of PVC over head tanks cover of standard dia and approved manufacture and as per requirment of specification etc. |
| 126 | Brass Spindle for Pillar Taps/bib cock/stop cock-15 mm nominal bore. |
| 127 | C. P brass long body bib cock of approved quality. |
| 128 | Towel rails CP pipe 600x20mm with brackets. |
| 129 | Supplying of GI/PTMT tank nipples of required dia 15 to 25mm for connecting the PVC tank as per requirements and approved quality. |
| 130 | Supplying of P.V.C. syphon set of approved make for maintenance of existing PVC 10litre flushing cisterns. |
| 131 | Supplying of 15mm dia CP brass hand operated shower with CP coil pipe for EWC of approved brand. |
| 132 | Supply of Kota stone Sink of 20mm thick kota stone approximate 600x450mm i/c bracket and 32 mm Cp brass waste |
| 133 | Supplying of 600x450 mm edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 134 | Supply of water tanker for cleaning and washing of manholes and sewerlines as per directions of EIC. |
| 135 | Credit of CP brass items |
| 136 | Credit of CI/GI/MS items |
| 137 | Credit of PVC/UPVC/CPVC items |
| 138 | Credit of Aluminium items |
| 139 | Credit of SCI items |
| 140 | Credit of Hydraulic door closer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender