Tender For Construction Of Chamber For Borewell Providing Laying And Fitting Of 80Mm Gi Pipe Fabrication Of Ladder And Installation Of Submersible Pump At Industrial Estate Phyang Under Sdp
Tender Value
16.60 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
3 days left
EMD
33200
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Chamber For Borewell Providing Laying And Fitting Of 80Mm Gi Pipe Fabrication Of Ladder And Installation Of Submersible Pump At Industrial Estate Phyang Under Sdp
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) includinggetting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, asdirected by Engineer-in-charge. All kinds of soil |
| 2 | Ordinary Rock |
| 3 | Dry stone pitcing (any thickness )including cost of stone |
| 4 | Providing and laying in position plan cement concrete of specified grade including curing but excluding the cost of centering and shuttering - All work up to plinth level with ratio ( :1:4:8 )stone aggregate 20 mm nominal size including cost of bond brick in 1:6 |
| 5 | Providing and laying in position cement concrete,specified grade excluding the cost of centering, shuttering.All work up to plinth level :1:1.5:3 ) stone aggregate 20 mm nominal size |
| 6 | Random Rubble masonary with nallah stone in foundation and plinth ,including cost of bond stone in 1:6 |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying primer coat of approved steel primer using structural steel etc.as required in grating ,frames guard bar, ladders ,railing ,bracket ,gates &similar works.for 01 no. chamber |
| 8 | Centering and shuttering including strutting, propping etc. and removal of formwork for :Foundation . |
| 9 | 12 mm thick cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4(1cement :4 fine sand )including cost and carriage of all material from source to site of work |
| 10 | Providing ,installation and successful commining of suitable submersible pump set make of cropton graves head capacity 105mtr Q=300LPM.WITH ELECTRICAL PANEL 415V.50CYCLE for three phase and safety cable wire 100mtr including all necessary fittings items including heigh quility metal box for control panel as per the direction of site engineer incharge incharge including carriage complete .50mm dia GI column pipe of 3mtr length with flange ended |
| 11 | Earth work in excavation by mechanical means trenches in foundation drain pipes cable etc. (not exceeding 1.5 m in width) and for shafts ,wells, cesspits and the like not exceeding 10sqm on plan ,depth up to 1.5mtr including disposal of the earth up to mtr from cutting edge disposed earth to be leveled and neatly dressed All kind of soil |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 13 | Earth work in excavation by manual means in trenches for foundation drain pipe cable etc. (not exceeding 1.5 m in width ) and for shafts ,wells, cesspits and the like not exceeding 10sqm on plan ,depth up to 1.5mtr including disposal of the earth up to mtr from cutting edge disposed earth to be leveled and neatly dressed All kind of soil |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 15 | Providing laying and fitting of 80mm dia G.I pipe conforming to 4984:2016 with latest amendments and conveyinging to work site including loading and unloading at both destination lowering into the trenches ,laying true to line and jointing of pipes by welding as per standard procedure and guideline ,including encasing the pipe around to adepth not less than 15cms with softs earth or selected earth available from the excavation site ,complete giving hydraulic test as per relvant ISI WITH all leads and lifts including testing commissioning flange fittings.The devition /bend is to be fabricated form available G.I pipe 80mm dia .the job shall be inclusive of all costs and carriage complete job as dircted by engineer incharge (contractor will make own arrangement for procuring water for testing )including transportation charge from division store to site work . |
| 16 | Providing and fixing gate valve of approved quality 80mm dia |
| 17 | Supply an installation of NRVof 80mm |
| 18 | Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying primer coat of approved steel primer using structural steel etc.as required in grating ,frames guard bar, ladders ,railing ,bracket ,gates Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender