Tender For Thorough Repair And Renovation Works To Make Ready As Model Flat For Shiliguri Zone Named As Zone -A ( 1 No. Duplex Flat And 1 No. Single Type Unsold Residential Flats At Himalaya Kanya Housing Project Phase-Iii At Siliguri In The District
Tender Value
7.64 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
5 days left
EMD
15298
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Thorough Repair And Renovation Works To Make Ready As Model Flat For Shiliguri Zone Named As Zone -A ( 1 No. Duplex Flat And 1 No. Single Type Unsold Residential Flats At Himalaya Kanya Housing Project Phase-Iii At Siliguri In The District Of Darjeeling) For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Taking out carefully Ranigunge pattern tiles from roof stacking seviceable tiles at site and removing rubbish as directed within a lead of 75m. |
| 2 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 3 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary . (i) With 1:6 cement mortar (b) 20 mm thick plaster |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary . (A) 15 mm thick Plaster(4:1) sand cement motor.(i) INTERNALd) 3rd. Floor |
| 5 | C) 10 mm thick plaster(4:1) sand cement morterd) 3rd floor |
| 6 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 7 | Polishing only of old marble or terrazo work with oxalicacid powder using 33 gms/ sq.m. bymanual labour / machine where necessary. |
| 8 | Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado. |
| 9 | (a)Cleaning the walls and ceiling by scraping, sand papering and smoothening down the surface including putting |
| 10 | Supplying, fitting & fixing1st qualityCeramic tiles in walls and floors to match with the existing work & 4nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the jointswithwhite cement mixed with colouringoxide if required to match the colour of tiles includingrougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc.a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 11 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.Window grill only(a) 3rd Floor |
| 12 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.Window grill only(a) 4th Floor |
| 13 | (A)Supplying fittingand fixingdoor framewithM.S. angle as per drawing & direction of required section.The holes for counter sunk machine screw & nuts will be such as to fit 8 to10 mm Iron screw.The counter sunk nut to be welded.Then utsare to be welded after careful checking with screw. All welding spots should be properly filed or rounded smooth including cost of welding hinges forhingecleats , lugs forhaspbolt, socketbolt etc. and necessary M.S. clampsof 25mm x 6mm flat 225 mm long as per direction welded to the frame fittedandfixed in position excluding cost of concrete. |
| 14 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sand wich core,so as to impart monolitaheic composite structure as per approved technology ofDepartment of Science andTechnology (DST) tosafisfy IS: 4020 door testing performance criteria..(i) 66mm x 90mm |
| 15 | Supplying, fitting& fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a specials andwichcore,soastoimpartmonolitaheiccompositestructureasper approved technology ofDepartment of Science andTechnology (DST) tosatisfy IS:4020 door testing performance criteria.In ground floor |
| 16 | Item No..63 ) Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings.(a) 35 mm thick shutters (single leaf) a) Gr. floor |
| 17 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bentbar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. (Cost of concrete will be paid separately) |
| 18 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fittedand fixed with cadmium plated screws:vi) 200mm long x 10mm dia. bolt.t. |
| 19 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fittedand fixedwith cadmium plated screws:(iv) 75 x 63 x 3.2mm. |
| 20 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fittedand fixedwith cadmium plated screws:vi) 125 x 63 x 3.2mm. |
| 21 | Applying Interior grade Acrylic Primer of approved quality and plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (i)Water based interior grade Acrylic primera) One coat. a) In Ground floor |
| 22 | Rendering theSurfaceofwalls andceilingwithWhiteCement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 23 | Supplying fittingand fixing I.R.C. fabric mesh with covering battens includingcost of screws etc complete (excluding the cost of battens).In ground floor.(j) 25mm x 25mm x 2.2mm x 2.2mm. |
| 24 | Supplying 1.5 mm thick M.S. sheet fitted and fixed on one or both faces ofM.S./W.I. gate etc.with point welding at not more than 150 mm apart complete in all respect as per design including cost of all labour and materials. |
| 25 | Doors & Windows(a) Metallic magic eye of approved quality fitted and fixed complete |
| 26 | ii) Door stopper (Anodised aluminium) |
| 27 | (b)Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 28 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand pap ering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface :(iii) One coats (with any shade except white) |
| 29 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand pap ering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface (iii) One coat (with any shade except white) |
| 30 | Post-Constructional Anti-termite measures:(d)Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion byadmixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a down ward angle of about 45 degree at the junction of wood work and masonry and squirting chemical emulsion into the seholes at the rate of half litre per hole.The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be throughly sprayed with chemical emulsion. (Payment will be made on the basis of outsidemeasurements of doors and windows) |
| 31 | Supplying best Indian sheet glasspanessetinputtyandfittedandfixedwithnailsandputtycomplete. (Inall floorsforinternalwall&upto6m height for external wall)ii) 4 mm thick |
| 32 | Sanitary and PlumbingSupplying, fitting and fixing shower of approved brand and make.(ii) Chromium plated round shower with revolving joint (Equivalent toCode No. 541(N) & Model- Tropical / Sumthing Special of ESSCO orsimilar brand). |
| 33 | Supplying, fitting and fixing bib cock or stop cock.(a)ii) Chromium plated Bib Cock long body with wall flange with aerator(Equivalent to Code No. 512 & Model- Tropical / Sumthing Special of ESSCO or similar brand) |
| 34 | Supplying, fitting and fixing bib cock or stop cock.C (i) Chromium plated Bib Cock (angular shape with wall flange)(Equivalent to Code No. 5037 & Model- Florentine of Jaquar or similar brand) |
| 35 | Supplying, fitting and fixing bib cock or stop cock.(ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand) |
| 36 | Supplying, fitting and fixing bib cock or stop cock.(ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand) |
| 37 | Supplying, fitting and fixing bib cock or stop cock.((ii) Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). |
| 38 | Labour for dismantling G.I. pipe with fittings.25 mm dia |
| 39 | e) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No.5167(B) & Model - FLORENTINE of JAQUAR or similar brand). |
| 40 | a) (i) CP Pillar Cock- 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand). |
| 41 | (d) Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).). |
| 42 | f) (ii) CP 2-way bib Cock- 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). |
| 43 | Supplying, fitting and fixing C.P. Extension Pipe |
| 44 | Supplying, fitting and fixing C.P. Wall Flange |
| 45 | 1 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS- 15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixingetc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11 |
| 46 | Supplying, fittingand fixingwhitevitreous chinabest quality approved make wash basin with C.I. brackets on 75mm X 75mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15mmdia., C.P. chain with rubber plug of 30mmdia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia.,900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damagesandpainting the brackets with two coatsof approved paint.(ii) 550 mm X 400 mm size |
| 47 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long |
| 48 | Supplying,fittingandfixingapprovedbrand32mmdia.P.V.C.wastepipe, with PVC coupling at one end fitted with necessary clamps.(iv) 1050 mm long |
| 49 | Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock- 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand). |
| 50 | Supplying, fitting and fixing 10 litre P.V.C. low- down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. |
| 51 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm |
| 52 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mm |
| 53 | Supplying, fitting and fixing towel rail with two brackets(iii) 25 mm dia. and 750 mm long |
| 54 | Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent) |
| 55 | Internal Electrical WorkSupplying and fixing 32 A, 415V, TPN SFU with sheetsteel enclosure on angle iron frame on wall with nuts bolts etc incl. S&F 3 nos.DIN type HRC fuse as per rating. |
| 56 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required(a)4x 10 sq mm |
| 57 | (b)4x 6 sq mm + 2x 4 sq mm |
| 58 | ( c )2x 6 sq mm + 1x 4 sq mm |
| 59 | ( d )2x 4 sq mm + 1x 2.5 sq mm |
| 60 | ( e )2x 2.5 sq mm + 1x 1.5 sq mm |
| 61 | ( f )3x 1.5 sq mm |
| 62 | Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection |
| 63 | Supplying and fixing 415V, 32 A, FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection |
| 64 | Supplying and fixing 240V,6- 32 A, SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection |
| 65 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board |
| 66 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling |
| 67 | Supply & Fixing 240V 6A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required |
| 68 | Supply & Fixing 240V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. Connection swithPVCCu wire and earth continuity wire etc. |
| 69 | Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections as required |
| 70 | Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required |
| 71 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S & F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 72 | Supplying and fixing 2+ 12 way double-door SPN MCB Distribution Board (MakeLegrand/Havells/ABB or Similar ISI make as per direction of EIC)with IP-42/43 protection,concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment. |
| 73 | Supplying and fixing 240V,32 A SPN MCB of Breaking capacity 10kA & C characteristics ondin rail of existing DBs and necessary connection |
| 74 | Supplying and fixing MCB SS 2-way enclosure withIP-20/30 protection, powder coated provision for two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment |
| 75 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required( a )3x 6 sq mm |
| 76 | ( b )2x 6 sq mm + 1x 4 sq mm |
| 77 | ( c )2x 4 sq mm + 1x 2.5 sq mm |
| 78 | ( d )2x 2.5 sq mm + 1x 1.5 sq mm |
| 79 | ( e )3x 1.5 sq mm |
| 80 | Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection |
| 81 | Supplying and fixing 240V,6- 32 A, SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection |
| 82 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board |
| 83 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling |
| 84 | Supply & Fixing 240V 6A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required |
| 85 | Supply & Fixing 240V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. Connection swithPVCCu wire and earth continuity wire etc. |
| 86 | Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections as required |
| 87 | Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required |
| 88 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S & F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 89 | Supplying and fixing 2+ 12 way double-door SPN MCB Distribution Board (MakeLegrand/Havells/ABB or Similar ISI make as per direction of EIC)with IP-42/43 protection,concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment. |
| 90 | GST @ 18% for all items |
| 91 | CESS @ 1% for all items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender