Tender For Supply Of Spare Parts Of T.Van, Cesspool Emptier, Water Tank, Hand Cart Etc. Under Rajpur Sonarpur Municipality.

Sharing tender

Tender for Supply Of Spare Parts Of T.Van, Cesspool Emptier, Water Tank, Hand Cart Etc. Under Rajpur Sonarpur Municipality. , Materials Details:- , Axle (Dia- 20Mm) , Spoke (Brand : Swastik / Anchor) , Back Stay , Bb Axle (Gk Or Equivalent , Beartng (62071 , Bearing Cover ( Heavy Duty) , Bearing Socket , Break Handi (Asoka) , Brake Shoe Clamp , Chain (Nirma Or Equivalent) , Clamp , Bib Cock {For Water Tanks) , Free {Brand : Birdi Or Equivalent) , Free Socket , Handle ( Brand : Kw Or Nellam) , Nut & Bolt , Rim For Wheel Of Garbage Trailers & Water Tanks, ( Brand : Kw Or Nellam) , Spoke Washer , Tyre & Tube Set , Tana Rod , Wooden Pedal , Van Body (Size : 48 X 33 X 18; Fabricated From 30Mm X 30Mm X Smm M.S. Angle At Bottom With Cross Member Fabricated From 25Mm X 25Mm X 5Mm M.S. Angle And 25Mm X 5Mm M.S. Flat. Four Sides Of The Frame Fabricated From 25 X25x Smm M.S. Angle & 25 X 5Mm Flat. A Sliding Type Removable Lid Fabricated From 25 X 25 X 5Mm M.S, Angle And 25 X 5Mm M.S. Flat. Floor & Side Covered With 14 & 16 Gauge Galvanized Plain Sheet And Complete With Antr Rust Paint. , Coupling For Cesspool (Male-Female Camlock Along With Tale Piece) , Pvc Suction Pipe For Cesspool (L= 20, Dia-3) , Rrm (For Wheei Of Garbage Tratlers & Water Tanks) , Hand Cart Complete Ispecification : 1 Frame: Capacity-9 Cft. L-900Mm, W- 600Mm, H-450Mm]; Fabricated From 35X35x5mm M.S. Angle Re-Inforced With 25X25x5mm M.S. Angle 25X5mm Flat. Horizontal Members Of Main Frame And Handle Of The Hand Cart Shall Be Made Of Single Angle And Continuous One. The Handle Shall Be 450 Long And Hand End Of 150Mm Length Shall Be Made 3Mm Thick M.S. Tube Which Shall Be Provided With Rubber Grip. The Body Shall Be Covered With 16 Gauge G,L. Sheet (Metal Erand: Sail/Tata/Bhusan). A Sliding Type Removable Lid For Unloading Shall Be Fabricated From 25 X Smm M.5. Flat With Cross Member Of The Same Section. 2) Wheel : 2 Nos. Wheels With A Dia Of 710Mm With 8 Nos. Oi Spoke Fabricated From 25 X 5Mm Flat. 3) Hubs: Fabricated From 100 Mm Sqare 3.25Mm Thick M.S Plate, 35Mm Od Pipe 4) Axle : Lt Shall Be Fabricated From 25.4Mm Dameter M.S. Round Bar And Complete With Painting. All Are Aec Welded. , Pole Mounted Dust Bin: Tiltable Type Pole Mounted Dust Bin Of 2 Nos Of 100 Ltrs Capacity Nilkamal Make High Density Polyethylene Uv Stabilized Vergin Grade Ida Approved, Lnjection Moulding, Cipet Compliant Dust Bin Having Bin Thickness 2.4 Mm. Lid Thickness 2.15 Mm, Minimurn Weight 4420 Grms With Hinged Attachment With Tid & Body, Absolutely Smooth And Sanitarv, Hygienic, Anti Acidic, Non-Toxic & Washable Structure Made From 40 X 40 Mm 3 Mm Thick Hollow Tube With Cross Mernber Of The Same Section 3Nod Base Plate Having 3Mm Thick Of 150Mmsquare. Thebinreinforcedwith25x 5 Mm M.5 Flat With Cross Member Of The Same Section. Top Of The Structure Should Be Provided For Advertising Arrangement. Holding Structure Should Be Made From 40 X 40 Mm 3 Mm Thick Hollow Tube With Cross Member Of The Same Section 3 Nod Base Plate Havrng 3 Mm Thick Of 150 Mm Square. The Bin Should Be Reinforced With 25 X 5 Mm M.S Flat With Cross Member Of The Same Section. T Op Of The Structure Should Be Having An Arrangement For Displaying Advertisements Please Take Note That The Authority May Ask The Selected Bidder To Undertake Cipet Test And Any Other Allied Quality Test, For Any Randomly Sele€Ted Bin/ Bins, At The Cost Of The Selected Bidder With The Certification Being Provided. Any Quaiity Failure Shall Result In Rejection Of The Supplied Hins, If Any Without The Authority Being Liable For Any Financial Losses Arising Out Of The Same Rejection Of Quality May Also 0 ,O .6Cellation Of Order Placed. An Emblem/Writing Should Be Affixed By Waterproof ;Ticker/Weather Proof Paint On The Bins And Supplier Shall Be Supplied With The Messages By The Municipality.