Tender For Laying Of 0.06 Km Lt Line On 8 Mtr Long Plain Cement Concrete Poles Using 400 Mm Sq Xlpe Single Core Cable Erection Of Ct/ Pt Unit For 400 Kva Substation And Construction Of Concrete Mesh Fencing Of 250 Kva And 400 Kva Existing Substation
Tender Overview
Project Description
Tender for Laying Of 0.06 Km Lt Line On 8 Mtr Long Plain Cement Concrete Poles Using 400 Mm Sq Xlpe Single Core Cable Erection Of Ct/ Pt Unit For 400 Kva Substation And Construction Of Concrete Mesh Fencing Of 250 Kva And 400 Kva Existing Substation In The Premises Of Govt. Degree College Paloura Bhalwal Under Dc Work Scheme Code Hedss2526100048
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer Electric Division-III , JPDCL Jammu Name of Work : Laying of 0.06 km LT line on 8 mtr long PCC poles using 400 mm sq XLPE single core cable Erection of CT/ PT Unit for 400 KVA substation AND Construction of concrete Mesh fencing of 250 KVA and 400 KVA existing Substation in the premises of Govt. Degree College Paloura Bhalwal Under DC Work scheme code HEDSS2526100048 Contract No: e-NIT No. 36A of 2026-27 dt. 12.08.2026. Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # |
| 2 | Item Description |
| 3 | Laying of 0.06 km LT line on 8 mtr long PCC poles using 400 mm sq XLPE single core cable for GDC Paloura , Bhalwal (Scheme Code HEDSS2526100048) ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job) |
| 4 | 8 Mtr. Long Pole(PCC WL-200Kg , ST-410 SP15) |
| 5 | 400 mm² XLPE Single core |
| 6 | Suspension/Tension Clamp with eye hook |
| 7 | Straigh Through Cable Jointing Kit |
| 8 | Galvanized Nuts and Bolts. |
| 9 | Danger Plates |
| 10 | Anti-Climbing Device with Clamps |
| 11 | Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip. |
| 12 | Stone Pad (300 mm x 300 mm x 75 mm) |
| 13 | Insulating Piercing Connetors |
| 14 | PG Clamps |
| 15 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 16 | Erection of CT/ PT Unit for 400 KVA sub station (Supplying, Installation, Testing & commissioning comp Job) |
| 17 | 11kV Pilfer resistant metering cubicle for 3phase 4 wire metering system made of MS Sheet steel thickness not less than 2mm duly power coat painted suitable for indoor as well as outdoor as per the site requirement. The cubicle shall be painted through 7- tank process. The External dimensions should be adequate. Panel having two compartments upper Meter compartment and lower CT/PT compartment. Provided with synthetic or semi synthetic gasket firmly glued to the surface, Dust, weather and Vermin proof and shall comply degree of protection IP 65 both the chambers having one sided hinged door arrangements. The metering panel shall be provided with two No MS channels of size 100 x 50 mm on the front and rear sides duly welded and 4 No of lifting hooks. It should be possible to take meter reading manually, through CMRI and computer without opening the LV chamber door. |
| 18 | Single Phase, Single core, single ratio, Epoxy resin Cast Current Transformers suitable for 11kV, copper wound primary type with rated burden 5VA and accuracy class 0.5 or better and conforming to IS2705 (part-I & II) amended upto date. ISF shall be upto 5 The CT ratio shall be as under: 25/5 for 400kVA DT |
| 19 | 11kV/ 110 V, Three phase epoxy resin cast PT with rated burden 15VA per phase andaccuracy class 0.5 or better and conforming to IS:3156 (part-I&II) amended upto date with proper colour coded identification. PTs shall be of uniform insulating and withstand separate source 23kV pf for one minute. |
| 20 | Bus Bar details:CTs bus bar:- 40x6 mm copper strip or adequate sizePTs bus bar: Copper wire 8 SWG or 30x0.6mm copper flat strip to connect PT terminal or adequate sizeduly insulated by the monoplast tape |
| 21 | PVC Copper wire flexible multi-strand of required size for secondary connections for CTwiring the minimum wire size shall be 4 mm2 (RYB) and for PT wiring minimum wire size shall be 2.5 mm2 (RYB). |
| 22 | Copper Lugs preferably ring type duly crimped for termination of wires and tapes |
| 23 | Grounding bus of minimum 40mm copper, 25cm long fixed to the unit in HV chamber.The CTs, PT meter and 11kV Cable sheath shall be grounded to the bus throughgrounding wire (green) of min size 10mm2 |
| 24 | 3Ph3 Wire HT CT/PT operated Fully static Smart Tri-Vector Energy meters DLMSCompliant Category 'C' with RS232 port for modem compatibility. 11kV/110V, Ph-Ph (3P,3W) meters for measurement of different electrical parameters including Active Energy (kWh/ MWh), Reactive Energy (kVArh/MVArh), Apparent Energy (kVAh/ MVAh) etc. (make L&T, Secure, ABB) |
| 25 | Independent flexible PVC pipes for CT wiring and PT wiring of appropriate size from HTcompartment to meter compartment |
| 26 | Pedestal made out of MS Channel of size 75 x 40 mm or angle iron of size 65 x 65 x 5mm, duly painted as per site requirement for mounting of metering panel including concrete foundation wherever required including cost of nuts and bolts |
| 27 | 3 Core 11 kV Aluminium cable XLPE armoured 35 mm2 including cost of clamp for its fixing where ever required. |
| 28 | Cable termination kits suitable for 3 x 35 mm2 XLPE Cable (indoor/outdoor) |
| 29 | Earthing 40 mm GI Pipe or 20 mm GI rod, 2.5 mtr for metering unit. Earthing ofmetering cubicle through two No 25 x 5 mm flat iron. |
| 30 | Construction of concret Mesh fencing of 250 KVA and 400 KVA existing Sub station in the permises of Govt Degree College , paloura Bhalwal |
| 31 | Providing and laying of CC foundations in ratio of 1:2:4 incluidng cost of curing, centering and shuttering for 40cu feet for fixing of Mesh fencing around the sub station and providing and fixing of mesh of size 6feetx12feetx8feet. Total in Figures 0.0 0.0 Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 No Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information Compatibility Report for BOQe-NIT68.xls Run on 05-03-2024 17:31 If the workbook is saved in an earlier file format or opened in an earlier version of Microsoft Excel, the listed features will not be available. Significant loss of functionality # of occurrences Version Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear truncated. 3.0 Excel 97-2003 Some cells in this workbook contain data validation rules, which refer to values on other worksheets. These rules won't be saved. 4.0 Excel 97-2003 Minor loss of fidelity Some cells or styles in this workbook contain formatting that is not supported by the selected file format. These formats will be converted to the closest format available. 4.0 Excel 97-2003 |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender