Tender For Rdddc2627105566 - Development Of Nayabat At Noorpora Block:Dadasara Scheme: Pri Year: 2026-27
Tender Value
4.69 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
22 days left
EMD
9394
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rdddc2627105566 - Development Of Nayabat At Noorpora Block:Dadasara Scheme: Pri Year: 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | 12mm Cement plaster of mix:13.1.1 1 : 4 ( 1 cement : 4 fine sand) |
| 2 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. imported kail wood 30 mm thick incl cost of primerand painting two or more coats incld the cost of panneling and glazing all complete |
| 3 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS 14616 and as per TADS 15:2001( Part B) using galvanized wire gauze with average width of aperture 1.4mm in both direction with wire of dia 0.63mm as per IS: 1568 for doors, windows and clerestory windows, including ISI marked MS pressed butt hinges bright finished of required size with necessary screws, as per direction of engineer in charge imported kail wood 30 mm thick incl cost of primerand painting two or more coats incld the cost of panneling and glazing all complete |
| 4 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. |
| 5 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 6 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm |
| 8 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.13.88.2 2 mm thick |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 10 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 11 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete imported K.D wood |
| 12 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.6 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 13 | P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 100 mm Handles |
| 14 | P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 150 mm Handles |
| 15 | 150mm T Bolts |
| 16 | P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 100mm T Bolts |
| 17 | P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- Hooks |
| 18 | P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- Door Stopper |
| 19 | P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- L Drop 200 |
| 20 | P/Fixing of 3 layerPP-R(Polypropelene Random Copolymer) pipes concealed fitting all complete (PN-16 Pipe,25mm) |
| 21 | P/Fixing of 3 layerPP-R(Polypropelene Random Copolymer) pipes concealed fitting all complete (PN-16 Pipe,32mm) |
| 22 | Providing and fixing PVC pipes 100mm Type B incl door tees,flow trap ,couplers,bends etc. |
| 23 | Providing and fixing PVC pipes 75mm Type B incl door tees,flow trap ,couplers,bends etc. |
| 24 | Providing and fixing Polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license(1000 litre) |
| 25 | Construction of brick masonary manholes for under ground ci inspection chamber and bend with 75 class designation brick in cement mortar 1:4 with PVC connection RCC top slab(1:2:4) and brick cement concrete/ mud cement concrete (1:4:8) incl. plastering with cement sand mix (1:3) with floating coat of neat and complete job. |
| 26 | Providing and fixing white vitreous Indian type water closet with PRS trap , 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures,complete including cutting and making good the walls and floors wherever requied:(580x440mm) |
| 27 | Providing and fixing white vitreous china pedestal type wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China wash basin size630x450 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers(Jaguar) and waste pipe. |
| 28 | Providing and fixing Short nose brass bib cock of approved quality with 15 mm nominal bore:CERA/JAGUAR |
| 29 | Provision for elbows,tees,unions,sockets,blades,spun yarn etc nipples all sizes,gratings,waste pipes,hooks etc |
| 30 | Providing and fixing c.p brass angle valve of approved quality :jaguar. |
| 31 | Providing and fixing brass stop cock of approved quality. 15 mm nominal bore |
| 32 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated rod with L.P/ H.P.H.D plastic balls.20mm nominal bore, 120mm long, weighing not less than 198gms. |
| 33 | P/F of PVC connections |
| 34 | P/F of water heater(Geyser) of standard make and manufacture 50 Litre capacity |
| 35 | Carriage of Materials by Mt Sand & stone agg. For 07 km |
| 36 | Add for sign board & other unforseen items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender