Health and Family Welfare Boards / Undertakings / PSU Closing in 9 days TDR #56979674

Bids Are invited for Hybridization Chamber For Fish Test (Hybrite) - Temperature Range: 30°C -99°C. , Lowest Programmable Temperature 30°C Or Ambient Temperature +5°C (Whichever Is Higher). , Processing Time: 00:00 - 99:59 Hr : Min. , Number Of Progr

Issued by Boards / Undertakings / PSU · Muzaffarpur, Bihar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Sep 2026
9 days left
EMD
47200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Muzaffarpur → Bihar
EMD Exemption
Available
Quantity
1

Project Description

Bids Are invited for Hybridization Chamber For Fish Test (Hybrite) - Temperature Range: 30°C -99°C. , Lowest Programmable Temperature 30°C Or Ambient Temperature +5°C (Whichever Is Higher). , Processing Time: 00:00 - 99:59 Hr : Min. , Number Of Programs: 40 Approximately , Three Operating Modes (Fixed Temperature, Hybridization Only Or Denaturation And Hybridization). , Slide Separator & Cover Gasket (Qty - 1 Each). , Humidity Cards (Qty - 5 Pairs). , Numeric Keypad For Easy Programming. , Ambient Operating Humidity :20-80% Relative. , Ambient Operating Temperature: 5-40°C (41-104°F) , R Time: 37-95°C In Less Than 3 Minutes , Cooling Time: 95-45°C In Less Than 6 Minutes , Environmental: Temperature 15° C To 40° C. , Ivd Certification Necessary For Use In Vitro Diagnostic Use In Denaturation / Hybridization Of Slide-Based Fish Procedures , System Should Be Verified During Installation By A Calibrated Temperature Verification , Local Service Support: Should Have Local Office And Service Support/Service Engineer For Attending The Breakdown Calls. Details To Be Submitted. , Response Time: Should Not Be More Than 06 Hrs From Lodging A Breakdown Complaint On Toll Free Or By Email. , Warranty- 2 Years , Amc/Cmc- Cost Per Annum Will Be Considered For All Bidders For 8 Years After Warranty

BOQ

Sl. No. Item TitleItem Description
1Temperature Range: 30°C -99°C.Temperature Range: 30°C -99°C.
2Lowest programmable temperature 30°C or ambient temperature +5°C (whichever is higher).Lowest programmable temperature 30°C or ambient temperature +5°C (whichever is higher).
3Processing Time: 00:00 - 99:59 hr : min.Processing Time: 00:00 - 99:59 hr : min.
4Number of Programs: 40 approximatelyNumber of Programs: 40 approximately
5Three operating modes (Fixed Temperature, Hybridization Only or Denaturation and Hybridization).Three operating modes (Fixed Temperature, Hybridization Only or Denaturation and Hybridization).
6Slide separator & Cover gasket (Qty - 1 each).Slide separator & Cover gasket (Qty - 1 each).
7Humidity cards (Qty - 5 Pairs).Humidity cards (Qty - 5 Pairs).
8Numeric keypad for easy programming.Numeric keypad for easy programming.
9Ambient operating Humidity :20-80% relative.Ambient operating Humidity :20-80% relative.
10Ambient operating Temperature: 5-40°C (41-104°F)Ambient operating Temperature: 5-40°C (41-104°F)
11Ramp Time: 37-95°C in less than 3 minutesRamp Time: 37-95°C in less than 3 minutes
12Cooling Time: 95-45°C in less than 6 minutesCooling Time: 95-45°C in less than 6 minutes
13Environmental: Temperature 15° C to 40° C.Environmental: Temperature 15° C to 40° C.
14IVD Certification Necessary for use in vitro diagnostic use in denaturation / hybridization of slide-based FISH proceduresIVD Certification Necessary for use in vitro diagnostic use in denaturation / hybridization of slide-based FISH procedures
15System should be verified during installation by a calibrated Temperature VerificationSystem should be verified during installation by a calibrated Temperature Verification
16Local Service Support: Should have local office and service support/service engineer for attending the breakdown calls. Details to be submitted.Local Service Support: Should have local office and service support/service engineer for attending the breakdown calls. Details to be submitted.
17Response Time: Should not be more than 06 hrs from lodging a breakdown complaint on toll free or by email.Response Time: Should not be more than 06 hrs from lodging a breakdown complaint on toll free or by email.
18Warranty- 2 yearsWarranty- 2 years
19AMC/CMC- cost per annum will be considered for all bidders for 8 years after warrantyAMC/CMC- cost per annum will be considered for all bidders for 8 years after warranty

AI Tender Summary

OUR REF NO 56979674
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 02-09-2026
Authority
Authority Name Tata Memorial Centre
Work Description Bids Are invited for Hybridization Chamber For Fish Test (Hybrite) - Temperature Range: 30°C -99°C. , Lowest Programmable Temperature 30°C Or Ambient Temperature +5°C (Whichever Is Higher). , Processing Time: 00:00 - 99:59 Hr : Min. , Number Of Programs: 40 Approximately , Three Operating Modes (Fixed Temperature, Hybridization Only Or Denaturation And Hybridization). , Slide Separator & Cover Gasket (Qty - 1 Each). , Humidity Cards (Qty - 5 Pairs). , Numeric Keypad For Easy Programming. , Ambient Operating Humidity :20-80% Relative. , Ambient Operating Temperature: 5-40°C (41-104°F) , R Time: 37-95°C In Less Than 3 Minutes , Cooling Time: 95-45°C In Less Than 6 Minutes , Environmental: Temperature 15° C To 40° C. , Ivd Certification Necessary For Use In Vitro Diagnostic Use In Denaturation / Hybridization Of Slide-Based Fish Procedures , System Should Be Verified During Installation By A Calibrated Temperature Verification , Local Service Support: Should Have Local Office And Service Support/Service Engineer For Attending The Breakdown Calls. Details To Be Submitted. , Response Time: Should Not Be More Than 06 Hrs From Lodging A Breakdown Complaint On Toll Free Or By Email. , Warranty- 2 Years , Amc/Cmc- Cost Per Annum Will Be Considered For All Bidders For 8 Years After Warranty
Basic Detail
Tender No GEM/2026/B/7882440
Bidding Type Tender
Location
City Muzaffarpur
State Bihar
Key Dates
Publish Date 12 Aug 2026
Submission Date 02 Sep 2026
Open Date 02 Sep 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 47200
Exemption Available
Document List
6606d81f-1c33-450f-a1a9-117472d79411.pdf
specifications_2026-08-06-10-32-15_9297a5b976a31599fef1729af27b4652.xlsx
Terms_4a4fe7f6-dbbf-4d1d-abe71786084444426_apomuz.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Sep 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
pdf

6606d81f-1c33-450f-a1a9-117472d79411.pdf

xlsx

specifications_2026-08-06-10-32-15_9297a5b976a31599fef1729af27b4652.xlsx

pdf

Terms_4a4fe7f6-dbbf-4d1d-abe71786084444426_apomuz.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders