Tender For Special Repair To Bldg No P-639 (Staff Qtrs Officers Mess) Alongwith Store Room And Toilets In Bb Cantt, Srinagar In The Aor Of Age B/R-Iii Under Ge 864 Ews
Tender Value
68 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-639 (Staff Qtrs Officers Mess) Alongwith Store Room And Toilets In Bb Cantt, Srinagar In The Aor Of Age B/R-Iii Under Ge 864 Ews
BOQ
| Sl. No. | Item Description |
| 1 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old roof sheets (any description, any thickness) complete all as specified and directed. |
| 2 | S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old roof sheets (any description, any thickness) complete all as specified and directed. |
| 3 | M&L for Pre Polished Machine cut kota stone slab (Mirror finish) flooring 20-25 mm thick over and including cement screed base 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 4 | M&L for Pre Polished Machine cut Kota stone slab (Mirror finish) 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm cement plaster in cement mortar 1:4 including roughening/complete scarification of surfaces of old concrete floor or taking down plaster by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 5 | M&L for pre polished green marble work 18 to 20mm thick in steps, jambs, pillars, window cills, cooking platforms, cupboards and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match including roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 6 | Taking down chowkats or frames not exc. 1.5 sq. m with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 7 | Taking down chowkats or frames exc. 1.5 sq. m but not exc 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 8 | S&F pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and including filling hollow of frame with plain cement concrete and/or with cement mortar complete all as specified and directed. |
| 9 | S&F factory made 35 mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including one shop coat of pink primer complete all as specified and directed. |
| 10 | S&F factory made 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.24 (a); supplied and fitted to chowkats including one shop coat of pink primer complete all as speicifed and directed. |
| 11 | M&L for PCC 1:2:4 type B-I using 20mm graded stone aggregate as in holdfasts complete all as specified and as directed by engineer in charge. |
| 12 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S square tube as per specification & drawing complete all as specified and directed. |
| 13 | S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed. |
| 14 | S&F 100 mm MS Butt hinges, medium weight, and fixed complete all as specified and directed. |
| 15 | S&F 100 mm stainless steel Butt hinges, medium weight, and fixed complete all as specified and directed. |
| 16 | S&F 150 mm alumnium handles cast type complete all as specified and directed. |
| 17 | S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 18 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 19 | S&F 18/19 mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws/stainless steel hinges to timber frame/steel frame work including dismantling old ceiling boards of any description complete all as specified. |
| 20 | S&F for mild steel 300 mm long ordinary rat tail rod pattern springs including rollers and roller plate etc complete all as specified and directed. |
| 21 | S&F 40mm dia, cupboard knobs fixed with nut, screws and washer of mild steel brass polioshed, bright finished complete all as specified and as directed. |
| 22 | S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm, with guard bars complete including hinges, handle, tower bolts, stops, lugs etc all as shown on drawing.Note : (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongeries shown on drgs. (iii) Wire mesh and sheet glass shall be measured and paid Separately. |
| 23 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 24 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 25 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane complete all as specified and as directed. |
| 26 | S&F in repair 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified. |
| 27 | Dismantling of old unservicsable timber scantling 40sqcm and over in section complete all as specified and directed. |
| 28 | S&F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., quality confirming to Fe 410-W(Gde-E- 250)quality-A complete all as specified and as directed by the Engineer-in-Charge |
| 29 | M&L for preparation of new/undecorated surface of wood (ordinary tint) with two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as specified and directed. |
| 30 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 31 | M&L for treatment to sunken portions of toilets by demolition of existing treatment of any description and thickness (to including tiles, concrete, sanitary fittings etc), removal rubbish outside MoD land, 10 mm thick plaster in CM 1:4 with water proofing liquid conplast 421 of Make - Fosroc or equivalent as specified and applying one coat of each Nittoproof 100 and Nittoproof 120 of Ms Fosroc or equivalent as specified on plastered surface and rendering again with 10 mm thick plaster in cement mortar 1:4 mixed with conplast 421 of Ms Fosroc or equivalent in sunken portion and CI pipe joints shall be filled/jointed with mixture of cement, fine sand and Nittoproof 130 of Ms Fosroc or equivalent as specified and provide hole in the wall to fix 20 mm dia GI spout 600 mm long and PCC 1:5:10 or red bajri/brick bats filling in sunken portion and finished top layer with 75 mm thick PCC in 1:2:4 to receive tiles all as specified . |
| 32 | M&L for light shade Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 for laying floor finishes including dismantling of floor tiles/pcc of any description complete all as specified and directed. |
| 33 | M&L for light shade Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, in skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:3 including dismantling old unserviceable of wall tiles including cement mortar bedding (but not backing) of any description complete all as specified and directed. |
| 34 | M&L for 25 mm thick cement concrete , 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base/levelling course including demolition of cement concrete un-reinforced in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 35 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)/demolition of pcc , and rubbish off the premises |
| 36 | M&L for Glazed Ceramic coloured tiles in vertical surface 350mm x 250mm /450mm X 350 and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in CM 1:4 for laying floor finishes includng dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified. |
| 37 | S & F in repair vetreous china wash down water closet pan (pedestal pattern) white including 10 ltr PVC flushing cistern and flush pipe including and PVC connection 15mm with PTMT nuts of length 450/600mm as suitable complete all as specified and directed. |
| 38 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 10 ltr PVC flushing cistern and flush pipe and PVC connection 15mm with PTMT nuts of length 450/600mm as suitable complete all as specified and directed. |
| 39 | S & F in repair Vitreous china wash basin oval type white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm bore centre hole mixer , complete all as specified & directed. |
| 40 | S & F in repair 15 mm bore brass CP Wall mixer 2 or 3 way (Complete set) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F in repair 15 mm Bib taps, CP fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified. |
| 42 | S&F in repair 15 mm angle valve/stop valves, CP fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 43 | S&F, in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including sink mixer complete all as specified and directed. |
| 44 | S&F in repairs 125 mm brass chromium plated shower roses including fixing to steel pipe etc complete all as specified and directed. |
| 45 | S&F for 4/5 mm thick looking mirror fancy type having border of designer etching as approved by user. Mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 46 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (minimum weight 40gms) complete all as specified and directed. |
| 47 | S&F 500 ltr capacity rotational moulded triple layered polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling old unserviceable tank all as specified and directed. |
| 48 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, traps,in any length with rubber ring joints, laid in walls/trenches or in floors incl all Tees, elbows, sockets etc fittings complete. |
| 49 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed, traps,in any length with rubber ring joints, laid in walls/ trenches or in floors including all Tees, elbows, sockets etc fittings complete all as specified and directed. |
| 50 | S&F in repair 40 mm bore PVC (SWR) pipes single socketed, traps,in any length with rubber ring joints, laid in trenches or in floors including all Tees, elbows, sockets etc fittings complete all as specified and directed. |
| 51 | S&F 40 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 52 | S&F 32 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 53 | S&F 20 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking up or down steel/PPR tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 54 | S&F 40 mm PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 55 | S&F 32 mm PP-R Gate valves (brass insert) as per requirement of the site all as specified and directed. |
| 56 | S&F 20 mm PP-R Gate valves (brass insert) as per requirement of the site all as specified and directed. |
| 57 | S&F in repair 28-30 mm dia Curtain Rods, mild steel (coloured - in wood finish or any other colour approved by user) with suitable fixing brackets and 02 x decorative Finials for each curtain rod and all other accessories complete all as specified and directed. |
| 58 | S&F in repairs, vitreous china urinal , half stall type white with gratings, union for discharge pipe , flush pipe and waste pipe , CP urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) fixed to water supply pipe etc complete all as specified and directed. |
| 59 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge |
| 60 | S&F in repair 4mm thick non asbestos fibre cement building boards fixed or laid over including anodised aluminium snap grid frame work of size 605mmx605mm for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including dismantling of old ceiling of any description / thickness complete all as specified all as specified |
| 61 | M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 including demolition of brickwork built in cement mortar in any position complete all as specified and directed . |
| 62 | M&L for brick work with sub class 'B' brick (old size bricks) straight or curved on plan to any radius in half brick thick walls build in cement mortar (1:4) incl demolition of brickwork built in cement mortar in any position complete all as specified and as directed. |
| 63 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 redenring is to be finished even and smooth without using extra cement all as specified and directed. |
| 64 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1: 6 including taking down old cement plaster from brick/stone work complete all as specified. |
| 65 | M&L for preparation of newly plastered wall surface with wall care putty and applying two coats oil bound distemper, smooth finish complete all as specified and directed. |
| 66 | M&L for preparation of old plastered wall surface with wall care putty and applying two coats oil bound distemper, smooth finish complete all as specified and directed. |
| 67 | M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and as directed. |
| 68 | M&L for preparation of new plastered surface with 3 mm thick wall care putty and applying two coats of oil bound distemper, smooth finish in ceiling complete all as specified and directed. |
| 69 | M&L for preparation of old plastered surface with 3 mm thickwall care putty and applying two coats of oil bound distemper, smooth finish in ceiling complete all as specified and directed. |
| 70 | M&L for rendering 10mm thick (1st coat) in cement mortar 1:6 and 2nd coat 5 mm thick in cement mortar 1:4 including using water proofing compound (as per manufacturer's instructions) without any extra cost to department on other than fair faces of brick work or concrete surface complete all as specified and directed . |
| 71 | M&L for rendering 10mm thick (1st coat) in cement mortar 1:6 and 2nd coat 5 mm thick in cement mortar 1:4 including cost of water proofing compound (as per manufacturer's instructions ) on other than fair faces of brick work or concrete surface inluding taking down old cement plaster from brick/stone work complete all as specified and directed. |
| 72 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces complete all as specified and directed. |
| 73 | M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old wall surfaces all as specified and directed. |
| 74 | M&L for liquid water proofing compound complete all as specified and directed. |
| 75 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 76 | M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 77 | M&L for 75mm thick cement concrete 1:3:6 type C-1( using 40 mm graded stone aggregate) as in plinth protection/hardstanding finished etc finished cement concrete even and smooth without using extra cement and filling the construction joints with mastic filling and including demolition of concrete of any thickness/description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 78 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 79 | Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and directed. |
| 80 | M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in coping/bed of drain,manhole & the like including weathering slightly rounded or chamfered angles & throating etc including necessary form work complete all as specified and drected. |
| 81 | M&L RCC 1:2:4, type B 1 (using 20mm graded stone aggregate) as in beams, cantilevers, lintels, over 1.5 m span, complete all as specified and directed. |
| 82 | M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified and directed. |
| 83 | M&L for TMT steel bars 10mm dia and over cut to length bent to shape reqd including cranking bending spirally for hooping for columns hooking ends and binding with M.S wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 84 | M&L for TMT steel bars exc 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and as directed. |
| 85 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 86 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors (including ornamental and intricate design) ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed. |
| 87 | M&L for painting of new steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of new surfaces, a coat of red oxide primer and 02 coats of synthetic enamel paint (G+2 roofs) complete all as specified and directed. |
| 88 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand over and including 75 mm thick cement concrete type D- 2, 1:4:8 (20mm graded aggregate) sub base including demolition of concrete of any thickness/description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 89 | M & L for Chequered cement concrete tiles 30cm X 30cm X 25cm thick, with gray cement and no pigments set, jointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:4 over 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub floors, sub-base,etc. and finishing surface of concrete even and rough to receive the topping layer and including demolition of concrete of any thickness/description and in any position not otherwise specifically provided forcomplete all as specified and directed. Note : Area being low lying/water logging. |
| 90 | Excavating in trenches (Manual) n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 91 | M&L for concrete bed to drain pipes of 150 mm dia in cement concrete 1:4:8, type D2 including forming cradles and demolition of cement concrete of any description and any possition complete all as specified and directed. |
| 92 | M&L for reinforced concrete pipes 150mm dia, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 93 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 94 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 95 | M&L for Granite (of any type) 18-20mm thick machine cut, as in floors and skirting, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and incl 15 mm thick screed bed in CM 1:6 and includiing roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all specified and directed. |
| 96 | S&F in repair for stainless steel plate rack 1 mm thick standred of size 750mm x900mm fixing with steel screw and weight not less then 8 kg each complete all as necessary items complete all as specified. |
| 97 | M&L for hardcore of gauge n exc 63mm , deposited , spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 98 | M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including dismantlling of cement concrete any description and in any possition all as specified and directed. |
| 99 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder, regulators, bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit complete all as specified and directed by EIC . |
| 100 | Dismantling unserviceable main switch/DBs with MCBs complete all as specified and directed. |
| 101 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 Volts grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 Volts grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for one light point /fan point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc complete all as specified & directed by EIC |
| 102 | Complete all as per above sr item No 101 but one 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch complete all as specified and directed. |
| 103 | All as per sr item No 101 here in before but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch complete all as specified and directed. |
| 104 | Description of all as per above Sr item No 101 but two 2 way piont and controlled by one two way switch point wiring system complete all as specified and directed. |
| 105 | All as per sr item No 101 here in before but using PVC insulated FRLS wire 1100 Volts grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 Volts grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete . |
| 106 | S&F of modular type switch 5/6 Amps 220 Volts AC, one module complete all as specified and directed. |
| 107 | S&F of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular complete all as specified and directed. |
| 108 | S&F of modular type switch of 15/16 Amps 220 Volts AC one module complete all as specified and directed. |
| 109 | S&F of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular complete all as specified and direted. |
| 110 | S&F of modular type switch 5/6 Amps 220 Volts AC,one module , 2 way complete all as specified and directed. |
| 111 | S&F of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know complete all as specified and directed. |
| 112 | S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed. |
| 113 | S&F of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb complete all as specified and directed . |
| 114 | S&F in renewal of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting all as specified & directed . Make : Havells cat part No ENDURA LINEARNEOBS20WLED865SPCWH or Equavalent in Bajaj/Philips/Crompton |
| 115 | S&F of surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection complete all as specified and directed. |
| 116 | S&F in renewal of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and makong electric connection and including taking down of old fitting all as specified and directed. |
| 117 | S&F in renewal of LED street light fitting of rated capacity 20W to 25Watt 230 Volts AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting all as specified and directed. |
| 118 | S&F of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amps and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed complete all as specified and directed. |
| 119 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 Volts 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. |
| 120 | S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 4/6 way type 220 Volts AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. |
| 121 | S&F of sheet metal enclosure box type duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 12 way type 220 Volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. |
| 122 | S&F of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified. |
| 123 | S&F of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified.. |
| 124 | S&F of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified and directed. |
| 125 | S&F of Sub main wiring system with two runs PVC insulated FRLS wire,1100 Volts grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note: 3 runs of 10 Sqm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 126 | Taking down existing 1200 mm sweep ceiling fan from ceiling including disconnecting wiring, dismantling complete fan body, supplying and fixing new fan body/casing with necessary screws, nuts, bolts, down rod, shackle, canopy & rewinding motar etc. including re-assembly of existing motor and blades, connection, testing, commissioning and refixing at original position complete as required and as directed by Engineer-in-Charge. |
| 127 | Supply fixing and comissioning and testing of star rated of electric ventilation exhaust fan of size 250 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work complete all as specified and directed by EIC. |
| 128 | Supplying and fixing in replacement twin core flat/ circular cable of size 10 sqmm 1100 Volts grade, heavy duty cable PVC insulated multistranded aluminium conductor cable served with inner sheathed of PVC tap and overall PVC sheathed and making electric connection, complete all as specified and directed. |
| 129 | S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore complete all as specified and directed. |
| 130 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 25 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 131 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in-Charge. |
| 132 | Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge. |
| 133 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge. |
| 134 | M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.Note - Punned thickness shall only be measured and payment. |
| 135 | Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge. |
| 136 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm and 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender