Tender For Special Repair To Bldg No Owt-30 & Owt-50; Special Repair To Bldg No Owt-273; Special Repair Of Storage Shelter No Owt-278 & 279; Special Repair To Bldg No Owt-102, Owt-106 And Owt-104; Special Repair To Bldg No Owt-23 To 25 At Borarupak Mil St
Tender Value
39.59 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
17 days left
EMD
79200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Upper Subansiri → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Owt-30 & Owt-50; Special Repair To Bldg No Owt-273; Special Repair Of Storage Shelter No Owt-278 & 279; Special Repair To Bldg No Owt-102, Owt-106 And Owt-104; Special Repair To Bldg No Owt-23 To 25 At Borarupak Mil Stn Under Ge 872 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish complete all as specified and directed. |
| 2 | Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal of debris and rubbish to a distance complete all as directed by the Engr-in-Charge |
| 3 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 4 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 5 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish complete all as specified and directed |
| 7 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed. |
| 8 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 9 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets/ snap grid frame etc complete all as specified and directed. |
| 10 | Taking down eaves gutters and rainwater/soil/waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 11 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, cable etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 13 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 14 | M & L for Sand cushioning to under ground cable in trenches /existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and streching the cable complete all as specified and directed. |
| 15 | M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks of size 300x200x200mm or 300x200x100mm, having compressive strength of not less than 100 Kg/Sq Cm (As per IS-2185) exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 16 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 17 | S&F powder coating (minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 18 | S&F Powder coated aluminium door shutter, aluminium section weighing 0.55 Kg/m (minimum) thickness not less that 2.00mm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door shutter, floor hinges, powder coated aluminium snap beading, screw etc complete all as specified and directed. |
| 19 | S&F aluminium door shutter, aluminium section weighing 0.55 Kg/m (minimum) thickness not less that 2.00mm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door shutter, floor hinges, powder coated aluminium snap beading, screw etc complete all as specified and directed. |
| 20 | S&F anodised aluminum powder coating of any colour (Minimum thickness of powder coating 50 micron) for window and ventilator shutters side huge type without sash , aluminum sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing , anodised aluminum snap beading , screws, anodised aluminum fittings such as peg stay 150mm long (1 Nos) , hinges type B-21 100mm long 02 Nos, suitable handle (01 Nos) complete all as specified and directed (Fixing of wire mesh and glass shall be measure and paid separately under relevant items) . |
| 21 | S&F Steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay with glazing bars dovetailed or welded complete all as specified. |
| 22 | S&F Steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay without glazing bars dovetailed or welded complete all as specified. |
| 23 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 24 | S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 25 | S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 26 | S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 27 | S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender